Adopted the fixes for no IDE-ROM and no IDE-Drive from Z2-Firmware

Logic/LAN_IDE_V2/LAN_IDE_CP.vhd

@@ -155,6 +155,7 @@ architecture Behavioral of LAN_IDE_CP is
 
 	signal AMIGA_CLK:STD_LOGIC;
 	signal DS:STD_LOGIC;
+	signal AS_D:STD_LOGIC;
 
 	signal LAN_CS_RST: std_logic;
 	signal LAN_WR_RST: std_logic;
@@ -182,6 +183,15 @@ begin
 	AMIGA_CLK <= not (C1 xor C3);
 	DS <= UDS and LDS;
 
+	AS_DELAY: process(CLK_EXT,reset)
+	begin
+		if(reset = '0' )then
+			AS_D <= '1';
+		elsif(rising_edge(AMIGA_CLK))then
+			AS_D <= AS;
+		end if;
+	end process;	
+
 	clock_init: process(reset,CLK_EXT)
 	begin
 		if(reset='0')then
@@ -624,9 +634,9 @@ begin
 	
 	--signal assignment
 	D(15 downto 0)	<=	Z3_DATA(31 downto 16) 	when RW='1' and FCS='0' and LAN_ACCESS ='1' else		
-							D_Z2_OUT	& x"FFF" 		when RW='1' and  AS='0' and AUTOCONFIG_Z2_ACCESS ='1' else
+							D_Z2_OUT	& x"FFF" 		when RW='1' and  AS_D='0' and AUTOCONFIG_Z2_ACCESS ='1' else
-							DQ(7 downto 0)&DQ(7 downto 0)  when RW='1' and CP_ACCESS = '1'     and AS='0' else
+							DQ(7 downto 0)&DQ(7 downto 0)  when RW='1' and CP_ACCESS = '1'     and AS_D='0' else
-							DQ(15 downto 0)  when RW='1' and IDE_ACCESS = '1'  and AS='0' else
+							DQ(15 downto 0)  when RW='1' and IDE_ACCESS = '1'  and AS_D='0' else
 							(others => 'Z');
 
 	A(23 downto 8)	<=	Z3_DATA(15 downto  0) 	when RW='1' and FCS='0' and LAN_ACCESS ='1' else			
@@ -639,12 +649,10 @@ begin
 			DQ_DATA(15 downto  0)	when RW='0' and FCS='0' and Z3_DS <"1111" and LAN_ACCESS ='1' else
 			D(15 downto 8 ) & D(15 downto 8) 	when RW='0' and AS='0' and CP_ACCESS ='1' else
 			D 	when RW='0' and AS='0' and IDE_ACCESS ='1' else
+			x"0000" when RW = '1' and AS= '0' and IDE_ACCESS ='1' and ROM_OE_S ='1' and IDE_R_S = '1' else --clear the bus just before an IDE-Read!
 			(others => 'Z');
 
 
-
-
-
 	INT2_OUT <= '0' when LAN_IRQ_OUT = '0' and LAN_INT_ENABLE = '1' else
 					--'0' when CP_IRQ = '0' else
 				  'Z';

Logic/LAN_IDE_V2/LAN_IDEz3v2.xise

@@ -62,8 +62,8 @@
     <property xil_pn:name="Enable Message Filtering" xil_pn:value="false" xil_pn:valueState="default"/>
     <property xil_pn:name="Equivalent Register Removal XST" xil_pn:value="true" xil_pn:valueState="default"/>
     <property xil_pn:name="Evaluation Development Board" xil_pn:value="None Specified" xil_pn:valueState="default"/>
-    <property xil_pn:name="Exhaustive Fit Mode" xil_pn:value="true" xil_pn:valueState="non-default"/>
+    <property xil_pn:name="Exhaustive Fit Mode" xil_pn:value="false" xil_pn:valueState="default"/>
-    <property xil_pn:name="FSM Encoding Algorithm" xil_pn:value="Sequential" xil_pn:valueState="non-default"/>
+    <property xil_pn:name="FSM Encoding Algorithm" xil_pn:value="Gray" xil_pn:valueState="non-default"/>
     <property xil_pn:name="Filter Files From Compile Order" xil_pn:value="true" xil_pn:valueState="default"/>
     <property xil_pn:name="Functional Model Target Language ArchWiz" xil_pn:value="VHDL" xil_pn:valueState="default"/>
     <property xil_pn:name="Functional Model Target Language Coregen" xil_pn:value="VHDL" xil_pn:valueState="default"/>
@@ -111,8 +111,8 @@
     <property xil_pn:name="Mux Extraction" xil_pn:value="Yes" xil_pn:valueState="default"/>
     <property xil_pn:name="Netlist Hierarchy" xil_pn:value="As Optimized" xil_pn:valueState="default"/>
     <property xil_pn:name="Number of Clock Buffers" xil_pn:value="4" xil_pn:valueState="default"/>
-    <property xil_pn:name="Optimization Effort" xil_pn:value="Normal" xil_pn:valueState="default"/>
+    <property xil_pn:name="Optimization Effort" xil_pn:value="High" xil_pn:valueState="non-default"/>
-    <property xil_pn:name="Optimization Goal" xil_pn:value="Speed" xil_pn:valueState="default"/>
+    <property xil_pn:name="Optimization Goal" xil_pn:value="Area" xil_pn:valueState="non-default"/>
     <property xil_pn:name="Other CPLD Fitter Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
     <property xil_pn:name="Other Compiler Options" xil_pn:value="" xil_pn:valueState="default"/>
     <property xil_pn:name="Other Compiler Options Fit" xil_pn:value="" xil_pn:valueState="default"/>