Dominick.Vansevenant/Zorro-LAN-IDE
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
d676378aba0f03f54bed8809c4949570f71366f5
Zorro-LAN-IDE/Driver/enc624j6net/smakefile
T
HenrykRichter d676378aba LAN Driver 
- bugfix: wraparound aware RX routine was potentially over- or undershooting 
    by two bytes
  - slight improvement to RX loop
  - revision bump to 0.2
2018-04-16 21:29:40 +02:00

251 lines
7.5 KiB
Plaintext
Raw Blame History

#sc:c/smake
#
#####################################################################
#
# $VER: smakefile 0.8 (09-Jan-2017)
# Henryk Richter
#
# based on Magplip build file
#####################################################################
#
DEVICE_DATE = 16.04.2018
DEVICE_VERSION = 0
DEVICE_REVISION = 2
# see below for EXTRAOBJ, disable for plipbox, enable for sdnet/enc624j6net
HWSRCDIR = enc624j6net
DEVICE_NAME = enc624j6net
DEFS = DEFINE PROTO_ENC624NET=1
# quick hack/test to write directly - didn't work out for me
#DEFINE DIRECT_WRITE=1
#####################################################################
#
# I keep various include trees, so for this project I directly reference
# the SAS/C installation for include paths
# The ASM stuff assumes the library offsets in "lvo/*", change if
# desired
#
LIBS = LIB sc:LIB/amiga.lib LIB sc:lib/sc.lib LIB sc:lib/debug.lib
CINCLUDES = INCDIR="sc:include" INCDIR="sc:netinclude" INCDIR="$(HWSRCDIR)"
#ASMINCLUDES = INCDIR="INCLUDE:" $(CINCLUDES)
ASMINCLUDES = -Isc:include -I$(HWSRCDIR)
CPUSUFFIX = 020 # 020 030 040 060 (note: asm sources use 020+ code in some places)
CPUCCOPT = CPU=68$(CPUSUFFIX)
CP = C:Copy
MV = C:Rename
RM = C:Delete >NIL:
LD = sc:c/slink
CC = sc:c/sc
AS = vasmm68k_mot
MAKE = sc:c/smake
ECHO = Echo
SUFFIX = $(PRSUFFIX)$(CPUSUFFIX)
#
#####################################################################
#####################################################################
#
# naming
#
DEVICE_DIR = build
BASENAME = $(DEVICE_NAME)
NAME = $(DEVICE_NAME).device
TESTNAME = enc624j6test
#
#####################################################################
#####################################################################
#
# assembler/compiler flags
#
# this applies to normal and optimized compilation:
#
STDFLAGS = $(CINCLUDES) NOMULTIPLEINCLUDES ERRREXX COMMENTNEST NOSTKCHK NOCHKABORT\
SMALLCODE SMALLDATA VERBOSE NOICONS STRICT ANSI $(DEFS)
#
# this applies only to normal compilation:
#
NORMCFLAGS = $(STDFLAGS)
#
# this applies only to optimized compilation:
#
OPTCFLAGS = $(STDFLAGS) $(CPUCCOPT) PARAMETERS=REGISTERS OPT OPTTIME OPTINLINE\
OPTSCHEDULE STRINGMERGE STRUCTUREEQUIVALENCE
#
# this applies to assembler compilation
#
#AFLAGS = CPU=68020 VERBOSE DEFINE $(PROTOCOL)PLIP=1
AFLAGS = -Fhunk -devpac -m68020 -quiet
#
#####################################################################
#####################################################################
#
# linkage flags
#
#LDFLAGS = NOICONS SC MAP bla.map $(LIBS) TO
LDFLAGS = NOICONS SC $(LIBS) TO
OPTLDFLAGS = NOICONS SC SD ND $(LIBS) TO
#
#####################################################################
#####################################################################
#
# the object files
#
# these are extra files for ENC624J6Net, disable for plipbox build
EXTRAOBJ=$(HWSRCDIR)/enc624j6l.o $(HWSRCDIR)/intervaltimer.o
EXTRAOBJOPT=$(HWSRCDIR)/enc624j6l.o $(HWSRCDIR)/intervaltimer.o
# these are for Plipbox build
#EXTRAOBJ=$(HWSRCDIR)/hwpar.o
#EXTRAOBJOPT=$(HWSRCDIR)/hwpar.o
#
# device support files
NORMOBJ=rt.o device.no server.no track.no $(HWSRCDIR)/hw.no $(EXTRAOBJ)
OPTOBJ=rt.o device.opt$(CPUSUFFIX) server.opt$(CPUSUFFIX) track.opt$(CPUSUFFIX) \
$(HWSRCDIR)/hw.opt$(CPUSUFFIX) $(EXTRAOBJOPT)
#
# Auto-generated includes
DEVINFO_INC=dev_info.i
DEVINFO_HINC=dev_info.h
BUILDDEPS=libsize.auto.i $(DEVINFO_INC) $(DEVINFO_HINC)
#
#
#####################################################################
#####################################################################
#
# rules
#
# compile a file normally
#
.c.no: $(BUILDDEPS)
$(CC) $(NORMCFLAGS) OBJECTNAME $@ $*.c
#
# compile a file optimizing
#
.c.opt$(SUFFIX): $(BUILDDEPS)
$(CC) $(OPTCFLAGS) OBJECTNAME $@ $*.c
#
# assemble a file
#
#.asm.o: $(BUILDDEPS)
# $(AS) $(AFLAGS) OBJECTNAME $@ $*.asm
.asm.o: $(BUILDDEPS)
$(AS) $(AFLAGS) $(ASMINCLUDES) -o $@ $*.asm
.s.o: $(BUILDDEPS)
$(AS) $(AFLAGS) $(ASMINCLUDES) -o $@ $*.asm
#
#####################################################################
#####################################################################
#
# targets
#
help:
-@Echo "Usage:"
-@Echo "To make an unoptimized version"
-@Echo " $(MAKE) all"
-@Echo "To make an optimized version"
-@Echo " $(MAKE) all_opt"
-@Echo "To %remove all intermediate files"
-@Echo " %$(MAKE) clean"
all: $(DEVICE_DIR)/$(NAME)
# $(TESTNAME)
all_opt: $(DEVICE_DIR)/$(NAME).$(CPUSUFFIX)
clean_norm:
-@$(RM) *.o
-@$(RM) *.no
-@$(RM) $(DEVICE_DIR)/$(NAME)
-@$(RM) $(HWSRCDIR)/*.no
-@$(RM) $(HWSRCDIR)/*.o
clean_opt:
-@$(RM) *.o
-@$(RM) *.opt* $(HWSRCDIR)/*.opt*
-@$(RM) $(HWSRCDIR)/*.o $(EXTRAOBJOPT)
-@$(RM) $(DEVICE_DIR)/$(NAME).$(CPUSUFFIX)
clean: clean_norm clean_opt
-@$(RM) $(DEVINFO_HINC) $(DEVINFO_INC) $(EXTRAOBJ) libsize.auto.i libsize.exe
$(DEVICE_DIR)/$(NAME).$(CPUSUFFIX): $(OPTOBJ) $(BUILDDEPS)
$(LD) $(OPTOBJ) $(OPTLDFLAGS) $@
$(DEVICE_DIR)/$(NAME): $(NORMOBJ)
$(LD) $(NORMOBJ) $(LDFLAGS) $@
$(TESTNAME) : $(NORMOBJ) sdnettest.no
$(LD) sc:lib/c.o sdnettest.no $(NORMOBJ) LIB sc:lib/scnb.lib $(LDFLAGS) $@
#
# libsize.auto.i is used in rt.asm, this is an extra step (needing an AmigaOS
# environment) but ensures that the hwbase and plipbase sizes are "current"
#
libsize.auto.i : libsize.exe
-@libsize.exe >$@
libsize.exe : libsize.c global.h $(HWSRCDIR)/hwbase.h
-@$(CC) $(NORMCFLAGS) OBJECTNAME t:libsize.o libsize.c
-@$(LD) sc:lib/c.o t:libsize.o LIB sc:lib/scnb.lib $(LDFLAGS) $@
-@$(RM) t:libsize.o
# --- dev_info.i ---
$(DEVINFO_INC): smakefile
@Echo "DEVICE_NAME MACRO" > $(DEVINFO_INC)
@Echo " dc.b '$(DEVICE_NAME)'" >> $(DEVINFO_INC)
@Echo " ENDM" >> $(DEVINFO_INC)
@Echo "DEVICE_DATE MACRO" >> $(DEVINFO_INC)
@Echo " dc.b '$(DEVICE_DATE)'" >> $(DEVINFO_INC)
@Echo " ENDM" >> $(DEVINFO_INC)
@Echo "DEVICE_VER MACRO" >> $(DEVINFO_INC)
@Echo " dc.b '$(DEVICE_VERSION).$(DEVICE_REVISION)'" >> $(DEVINFO_INC)
@Echo " ENDM" >> $(DEVINFO_INC)
@Echo "DEVICE_VERSION equ $(DEVICE_VERSION)" >> $(DEVINFO_INC)
@Echo "DEVICE_REVISION equ $(DEVICE_REVISION)" >> $(DEVINFO_INC)
# --- dev_info.h ---
$(DEVINFO_HINC): smakefile
-@Echo "\#ifndef _DEV_INFO_H" > $(DEVINFO_HINC)
-@Echo "\#define _DEV_INFO_H" >> $(DEVINFO_HINC)
-@Echo "\#define DEVICE_NAME " NOLINE >> $(DEVINFO_HINC)
-@Echo >> $(DEVINFO_HINC) !" NOLINE FIRST=2
-@Echo NOLINE "$(DEVICE_NAME)" >> $(DEVINFO_HINC)
-@Echo >> $(DEVINFO_HINC) !" FIRST=2
-@Echo "\#define DEVICE_DATE " NOLINE >> $(DEVINFO_HINC)
-@Echo >> $(DEVINFO_HINC) !" NOLINE FIRST=2
-@Echo NOLINE "$(DEVICE_DATE)" >> $(DEVINFO_HINC)
-@Echo >> $(DEVINFO_HINC) !" FIRST=2
-@Echo "\#define DEVICE_VER " NOLINE >> $(DEVINFO_HINC)
-@Echo >> $(DEVINFO_HINC) !" NOLINE FIRST=2
-@Echo NOLINE "$(DEVICE_VERSION).$(DEVICE_REVISION)" >> $(DEVINFO_HINC)
-@Echo >> $(DEVINFO_HINC) !" FIRST=2
-@Echo "\#define DEVICE_VERSION $(DEVICE_VERSION)" >> $(DEVINFO_HINC)
-@Echo "\#define DEVICE_REVISION $(DEVICE_REVISION)" >> $(DEVINFO_HINC)
-@Echo "\#endif" >> $(DEVINFO_HINC)
#
#####################################################################
#####################################################################
#
# various dependencies (most from Magplip, unmodified so far)
#
rt.o: rt.asm $(DEVINFO_HINC) $(DEVINFO_INC) libsize.auto.i
$(PROTOCOL)device.opt$(SUFFIX) device.no: device.c global.h
$(PROTOCOL)server.opt$(SUFFIX) server.no: server.c global.h
$(PROTOCOL)track.opt$(SUFFIX) track.no: track.c global.h
#
#####################################################################
Reference in New Issue View Git Blame Copy Permalink