cpldfit: version P.68d Xilinx Inc. Fitter Report Design Name: LAN_IDE_CP Date: 12-15-2016, 10:33PM Device Used: XC95144XL-10-TQ144 Fitting Status: Successful ************************* Mapped Resource Summary ************************** Macrocells Product Terms Function Block Registers Pins Used/Tot Used/Tot Inps Used/Tot Used/Tot Used/Tot 114/144 ( 79%) 391 /720 ( 54%) 269/432 ( 62%) 45 /144 ( 31%) 101/117 ( 86%) ** Function Block Resources ** Function Mcells FB Inps Pterms IO Block Used/Tot Used/Tot Used/Tot Used/Tot FB1 18/18* 38/54 45/90 13/15 FB2 18/18* 34/54 42/90 13/15 FB3 13/18 31/54 78/90 13/15 FB4 18/18* 32/54 35/90 14/15 FB5 18/18* 39/54 54/90 14/14* FB6 17/18 34/54 66/90 12/13 FB7 8/18 37/54 46/90 11/15 FB8 4/18 24/54 25/90 11/15 ----- ----- ----- ----- 114/144 269/432 391/720 101/117 * - Resource is exhausted ** Global Control Resources ** Global clock net(s) unused. Global output enable net(s) unused. Signal 'RESET' mapped onto global set/reset net GSR. ** Pin Resources ** Signal Type Required Mapped | Pin Type Used Total ------------------------------------|------------------------------------ Input : 32 32 | I/O : 95 109 Output : 36 36 | GCK/IO : 1 3 Bidirectional : 32 32 | GTS/IO : 4 4 GCK : 0 0 | GSR/IO : 1 1 GTS : 0 0 | GSR : 1 1 | ---- ---- Total 101 101 ** Power Data ** There are 114 macrocells in high performance mode (MCHP). There are 0 macrocells in low power mode (MCLP). End of Mapped Resource Summary ************************** Errors and Warnings *************************** WARNING:Cpld - Unable to retrieve the path to the iSE Project Repository. Will use the default filename of 'LAN_IDE_CP.ise'. INFO:Cpld - Inferring BUFG constraint for signal 'CLK_EXT' based upon the LOC constraint 'P30'. It is recommended that you declare this BUFG explicitedly in your design. Note that for certain device families the output of a BUFG constraint can not drive a gated clock, and the BUFG constraint will be ignored. WARNING:Cpld:936 - The output buffer 'OVR_OBUF' is missing an input and will be deleted. WARNING:Cpld:936 - The output buffer 'MTACK_OBUF' is missing an input and will be deleted. WARNING:Cpld:936 - The output buffer 'LAN_CFG<4>_OBUF' is missing an input and will be deleted. WARNING:Cpld:936 - The output buffer 'LAN_CFG<3>_OBUF' is missing an input and will be deleted. WARNING:Cpld:936 - The output buffer 'LAN_CFG<2>_OBUF' is missing an input and will be deleted. WARNING:Cpld:936 - The output buffer 'LAN_CFG<1>_OBUF' is missing an input and will be deleted. WARNING:Cpld:1007 - Removing unused input(s) 'A<15>'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:1007 - Removing unused input(s) 'CLK_EXT'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:1007 - Removing unused input(s) 'CP_IRQ'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:1007 - Removing unused input(s) 'DS0'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:1007 - Removing unused input(s) 'DS1'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:1007 - Removing unused input(s) 'FCS'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:1007 - Removing unused input(s) 'IDE_WAIT'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:1007 - Removing unused input(s) 'MTCR'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:1007 - Removing unused input(s) 'Z3'. The input(s) are unused after optimization. Please verify functionality via simulation. ************************* Summary of Mapped Logic ************************ ** 68 Outputs ** Signal Total Total Loc Pin Pin Pin Pwr Slew Reg Init Name Pts Inps No. Type Use Mode Rate State IDE_CS<1> 1 1 FB1_1 23 I/O O STD FAST D<7> 3 6 FB1_2 16 I/O I/O STD FAST D<1> 3 6 FB1_3 17 I/O I/O STD FAST IDE_A<2> 1 1 FB1_4 25 I/O O STD FAST D<8> 3 6 FB1_5 19 I/O I/O STD FAST D<5> 3 6 FB1_6 20 I/O I/O STD FAST D<4> 3 6 FB1_8 21 I/O I/O STD FAST IDE_CS<0> 1 1 FB1_9 22 I/O O STD FAST IDE_A<0> 1 1 FB1_11 24 I/O O STD FAST IDE_A<1> 1 1 FB1_12 26 I/O O STD FAST IDE_R 2 6 FB1_14 27 I/O O STD FAST SET IDE_W 2 5 FB1_15 28 I/O O STD FAST SET ROM_OE 2 6 FB1_16 35 I/O O STD FAST SET A_LAN<9> 1 1 FB2_1 142 I/O O STD FAST A_LAN<0> 1 1 FB2_4 4 I/O O STD FAST D<0> 3 6 FB2_5 2 GTS/I/O I/O STD FAST A_LAN<1> 1 1 FB2_6 3 GTS/I/O O STD FAST A_LAN<3> 1 1 FB2_8 5 GTS/I/O O STD FAST A_LAN<2> 1 1 FB2_9 6 GTS/I/O O STD FAST A_LAN<5> 1 1 FB2_10 7 I/O O STD FAST A_LAN<4> 1 1 FB2_11 9 I/O O STD FAST A_LAN<7> 1 1 FB2_12 10 I/O O STD FAST A_LAN<6> 1 1 FB2_14 11 I/O O STD FAST D<6> 3 6 FB2_16 14 I/O I/O STD FAST D<3> 3 6 FB2_17 15 I/O I/O STD FAST D<2> 3 6 FB3_1 39 I/O I/O STD FAST INT_OUT 1 1 FB3_2 32 GCK/I/O O STD FAST D<10> 3 6 FB3_3 41 I/O I/O STD FAST D<12> 6 7 FB3_4 44 I/O I/O STD FAST CP_CS 1 2 FB3_6 34 I/O O STD FAST D<14> 6 7 FB3_7 46 I/O I/O STD FAST D<9> 3 6 FB3_9 40 I/O I/O STD FAST D<15> 6 7 FB3_10 48 I/O I/O STD FAST D<11> 3 6 FB3_11 43 I/O I/O STD FAST D<13> 6 7 FB3_12 45 I/O I/O STD FAST DQ<0> 2 2 FB4_1 118 I/O I/O STD FAST DQ<6> 2 2 FB4_2 126 I/O I/O STD FAST LAN_CS 0 0 FB4_3 133 I/O O STD FAST DQ<8> 2 2 FB4_5 128 I/O I/O STD FAST DQ<10> 2 2 FB4_6 129 I/O I/O STD FAST Signal Total Total Loc Pin Pin Pin Pwr Slew Reg Init Name Pts Inps No. Type Use Mode Rate State DQ<12> 2 2 FB4_8 130 I/O I/O STD FAST DQ<14> 2 2 FB4_9 131 I/O I/O STD FAST LAN_WRH 1 4 FB4_11 132 I/O O STD FAST LAN_RD 1 3 FB4_12 134 I/O O STD FAST A_LAN<12> 1 1 FB4_13 137 I/O O STD FAST A_LAN<13> 1 1 FB4_14 136 I/O O STD FAST A_LAN<10> 1 1 FB4_15 138 I/O O STD FAST A_LAN<11> 1 1 FB4_16 139 I/O O STD FAST A_LAN<8> 1 1 FB4_17 140 I/O O STD FAST ROM_B<0> 0 0 FB5_10 68 I/O O STD FAST CP_WE 2 5 FB5_13 70 I/O O STD FAST ROM_B<1> 0 0 FB5_17 69 I/O O STD FAST SLAVE 2 5 FB6_2 106 I/O O STD FAST DQ<15> 2 2 FB6_6 112 I/O I/O STD FAST DQ<13> 2 2 FB6_8 113 I/O I/O STD FAST DQ<9> 2 2 FB6_9 116 I/O I/O STD FAST DQ<11> 2 2 FB6_10 115 I/O I/O STD FAST DQ<3> 2 2 FB6_11 119 I/O I/O STD FAST DQ<2> 2 2 FB6_12 120 I/O I/O STD FAST DQ<5> 2 2 FB6_14 121 I/O I/O STD FAST DQ<4> 2 2 FB6_15 124 I/O I/O STD FAST DQ<1> 2 2 FB6_16 117 I/O I/O STD FAST DQ<7> 2 2 FB6_17 125 I/O I/O STD FAST CP_RD 1 3 FB7_2 71 I/O O STD FAST LAN_WRL 1 4 FB7_6 76 I/O O STD FAST DTACK 0 0 FB7_12 85 I/O O STD FAST OWN 1 1 FB8_16 107 I/O O STD FAST CFOUT 1 3 FB8_17 105 I/O O STD FAST ** 46 Buried Nodes ** Signal Total Total Loc Pwr Reg Init Name Pts Inps Mode State IDE_ENABLE 3 6 FB1_7 STD RESET CP_BASEADR<3> 4 17 FB1_10 STD RESET CP_BASEADR<2> 4 17 FB1_13 STD RESET CP_BASEADR<1> 4 17 FB1_17 STD RESET CP_BASEADR<0> 4 17 FB1_18 STD RESET IDE_BASEADR<5> 4 16 FB2_2 STD RESET IDE_BASEADR<4> 4 16 FB2_3 STD RESET CP_BASEADR<7> 4 17 FB2_7 STD RESET CP_BASEADR<6> 4 17 FB2_13 STD RESET CP_BASEADR<5> 4 17 FB2_15 STD RESET CP_BASEADR<4> 4 17 FB2_18 STD RESET $OpTx$INV$116__$INT 3 5 FB3_5 STD Dout1<2> 18 15 FB3_14 STD RESET Dout1<0> 19 16 FB3_17 STD RESET IDE_BASEADR<6> 4 16 FB4_4 STD RESET IDE_BASEADR<2> 4 16 FB4_7 STD RESET IDE_BASEADR<1> 4 16 FB4_10 STD RESET IDE_BASEADR<0> 4 16 FB4_18 STD RESET AUTO_CONFIG_DONE<0> 2 2 FB5_1 STD RESET SHUT_UP<1> 3 15 FB5_2 STD RESET SHUT_UP<0> 3 14 FB5_3 STD RESET AUTO_CONFIG_DONE_CYCLE<2> 3 15 FB5_4 STD RESET AUTO_CONFIG_DONE_CYCLE<1> 3 14 FB5_5 STD RESET AUTO_CONFIG_DONE_CYCLE<0> 3 13 FB5_6 STD RESET $OpTx$INV$115__$INT 3 5 FB5_7 STD LAN_BASEADR<7> 4 15 FB5_8 STD RESET LAN_BASEADR<6> 4 15 FB5_9 STD RESET LAN_BASEADR<5> 4 15 FB5_11 STD RESET LAN_BASEADR<4> 4 15 FB5_12 STD RESET LAN_BASEADR<3> 4 15 FB5_14 STD RESET LAN_BASEADR<2> 4 15 FB5_15 STD RESET LAN_BASEADR<1> 4 15 FB5_16 STD RESET LAN_BASEADR<0> 4 15 FB5_18 STD RESET SHUT_UP<2> 3 16 FB6_3 STD RESET SLAVE_OBUF__$INT 2 5 FB6_4 STD Dout1<3> 14 15 FB6_5 STD RESET IDE_BASEADR<7> 4 16 FB6_7 STD RESET IDE_BASEADR<3> 4 16 FB6_13 STD RESET Dout1<1> 17 15 FB6_18 STD RESET ide 19 19 FB7_4 STD RESET Signal Total Total Loc Pwr Reg Init Name Pts Inps Mode State AUTO_CONFIG_DONE<2> 2 2 FB7_7 STD RESET lan/lan_CLKF 2 2 FB7_8 STD AUTO_CONFIG_DONE<1> 2 2 FB7_16 STD RESET cp 19 19 FB7_18 STD RESET autoconfig 4 14 FB8_15 STD RESET lan 19 19 FB8_18 STD RESET ** 33 Inputs ** Signal Loc Pin Pin Pin Name No. Type Use RESET FB2_2 143 GSR/I/O GSR/I A<5> FB3_14 49 I/O I A<4> FB3_15 50 I/O I A<6> FB3_17 51 I/O I A<3> FB5_2 52 I/O I A<10> FB5_3 59 I/O I A<7> FB5_5 53 I/O I A<2> FB5_6 54 I/O I A<14> FB5_7 66 I/O I A<8> FB5_8 56 I/O I A<1> FB5_9 57 I/O I A<9> FB5_11 58 I/O I A<11> FB5_12 60 I/O I A<12> FB5_14 61 I/O I A<13> FB5_15 64 I/O I LAN_INT FB6_4 111 I/O I AUTOBOOT_OFF FB7_3 75 I/O I AS FB7_9 80 I/O I LDS FB7_11 82 I/O I UDS FB7_13 81 I/O I A<23> FB7_14 86 I/O I A<22> FB7_15 87 I/O I RW FB7_16 83 I/O I A<21> FB7_17 88 I/O I A<20> FB8_2 91 I/O I A<17> FB8_3 95 I/O I A<16> FB8_4 97 I/O I A<19> FB8_5 92 I/O I A<18> FB8_8 94 I/O I BERR FB8_11 98 I/O I C1 FB8_13 103 I/O I C3 FB8_14 102 I/O I CFIN FB8_15 104 I/O I Legend: Pin No. - ~ - User Assigned ************************** Function Block Details ************************ Legend: Total Pt - Total product terms used by the macrocell signal Imp Pt - Product terms imported from other macrocells Exp Pt - Product terms exported to other macrocells in direction shown Unused Pt - Unused local product terms remaining in macrocell Loc - Location where logic was mapped in device Pin Type/Use - I - Input GCK - Global Clock O - Output GTS - Global Output Enable (b) - Buried macrocell GSR - Global Set/Reset X - Signal used as input to the macrocell logic. Pin No. - ~ - User Assigned *********************************** FB1 *********************************** Number of function block inputs used/remaining: 38/16 Number of signals used by logic mapping into function block: 38 Signal Total Imp Exp Unused Loc Pin Pin Pin Name Pt Pt Pt Pt # Type Use IDE_CS<1> 1 0 0 4 FB1_1 23 I/O O D<7> 3 0 0 2 FB1_2 16 I/O I/O D<1> 3 0 0 2 FB1_3 17 I/O I/O IDE_A<2> 1 0 0 4 FB1_4 25 I/O O D<8> 3 0 0 2 FB1_5 19 I/O I/O D<5> 3 0 0 2 FB1_6 20 I/O I/O IDE_ENABLE 3 0 0 2 FB1_7 (b) (b) D<4> 3 0 0 2 FB1_8 21 I/O I/O IDE_CS<0> 1 0 0 4 FB1_9 22 I/O O CP_BASEADR<3> 4 0 0 1 FB1_10 31 I/O (b) IDE_A<0> 1 0 0 4 FB1_11 24 I/O O IDE_A<1> 1 0 0 4 FB1_12 26 I/O O CP_BASEADR<2> 4 0 0 1 FB1_13 (b) (b) IDE_R 2 0 0 3 FB1_14 27 I/O O IDE_W 2 0 0 3 FB1_15 28 I/O O ROM_OE 2 0 0 3 FB1_16 35 I/O O CP_BASEADR<1> 4 0 0 1 FB1_17 30 GCK/I/O (b) CP_BASEADR<0> 4 0 0 1 FB1_18 (b) (b) Signals Used by Logic in Function Block 1: $OpTx$INV$116__$INT 14: A<6> 27: DQ<4>.PIN 2: AS 15: A<9> 28: DQ<1>.PIN 3: AUTO_CONFIG_DONE<0> 16: A<10> 29: DQ<8>.PIN 4: AUTO_CONFIG_DONE<1> 17: CP_BASEADR<0> 30: DQ<7>.PIN 5: AUTO_CONFIG_DONE<2> 18: CP_BASEADR<1> 31: RESET 6: A<1> 19: CP_BASEADR<2> 32: RW 7: A<11> 20: CP_BASEADR<3> 33: UDS 8: A<12> 21: D<10>.PIN 34: autoconfig 9: A<13> 22: D<11>.PIN 35: cp 10: A<2> 23: D<8>.PIN 36: ide 11: A<3> 24: D<9>.PIN 37: lan 12: A<4> 25: IDE_ENABLE 38: lan/lan_CLKF 13: A<5> 26: DQ<5>.PIN Signal 1 2 3 4 FB Name 0----+----0----+----0----+----0----+----0 Inputs IDE_CS<1> ........X............................... 1 D<7> XX...........................X.X..X.X... 6 D<1> XX.........................X...X..X.X... 6 IDE_A<2> ......X................................. 1 D<8> XX..........................X..X..X.X... 6 D<5> XX.......................X.....X..X.X... 6 IDE_ENABLE .X......................X.....XX...X.X.. 6 D<4> XX........................X....X..X.X... 6 IDE_CS<0> .......X................................ 1 CP_BASEADR<3> .XXXXX...XXXXX.....X.X........XXXX...X.. 17 IDE_A<0> ..............X......................... 1 IDE_A<1> ...............X........................ 1 CP_BASEADR<2> .XXXXX...XXXXX....X.X.........XXXX...X.. 17 IDE_R .X......................X.....XX...X.X.. 6 IDE_W .X............................XX...X.X.. 5 ROM_OE .X......................X.....XX...X.X.. 6 CP_BASEADR<1> .XXXXX...XXXXX...X.....X......XXXX...X.. 17 CP_BASEADR<0> .XXXXX...XXXXX..X.....X.......XXXX...X.. 17 0----+----1----+----2----+----3----+----4 0 0 0 0 *********************************** FB2 *********************************** Number of function block inputs used/remaining: 34/20 Number of signals used by logic mapping into function block: 34 Signal Total Imp Exp Unused Loc Pin Pin Pin Name Pt Pt Pt Pt # Type Use A_LAN<9> 1 0 0 4 FB2_1 142 I/O O IDE_BASEADR<5> 4 0 0 1 FB2_2 143 GSR/I/O GSR/I IDE_BASEADR<4> 4 0 0 1 FB2_3 (b) (b) A_LAN<0> 1 0 0 4 FB2_4 4 I/O O D<0> 3 0 0 2 FB2_5 2 GTS/I/O I/O A_LAN<1> 1 0 0 4 FB2_6 3 GTS/I/O O CP_BASEADR<7> 4 0 0 1 FB2_7 (b) (b) A_LAN<3> 1 0 0 4 FB2_8 5 GTS/I/O O A_LAN<2> 1 0 0 4 FB2_9 6 GTS/I/O O A_LAN<5> 1 0 0 4 FB2_10 7 I/O O A_LAN<4> 1 0 0 4 FB2_11 9 I/O O A_LAN<7> 1 0 0 4 FB2_12 10 I/O O CP_BASEADR<6> 4 0 0 1 FB2_13 12 I/O (b) A_LAN<6> 1 0 0 4 FB2_14 11 I/O O CP_BASEADR<5> 4 0 0 1 FB2_15 13 I/O (b) D<6> 3 0 0 2 FB2_16 14 I/O I/O D<3> 3 0 0 2 FB2_17 15 I/O I/O CP_BASEADR<4> 4 0 0 1 FB2_18 (b) (b) Signals Used by Logic in Function Block 1: $OpTx$INV$116__$INT 13: A<8> 24: IDE_BASEADR<5> 2: AS 14: A<10> 25: DQ<3>.PIN 3: AUTO_CONFIG_DONE<0> 15: CP_BASEADR<4> 26: DQ<0>.PIN 4: AUTO_CONFIG_DONE<1> 16: CP_BASEADR<5> 27: DQ<6>.PIN 5: AUTO_CONFIG_DONE<2> 17: CP_BASEADR<6> 28: RESET 6: A<1> 18: CP_BASEADR<7> 29: RW 7: A<2> 19: D<12>.PIN 30: UDS 8: A<3> 20: D<13>.PIN 31: autoconfig 9: A<4> 21: D<14>.PIN 32: cp 10: A<5> 22: D<15>.PIN 33: lan 11: A<6> 23: IDE_BASEADR<4> 34: lan/lan_CLKF 12: A<7> Signal 1 2 3 4 FB Name 0----+----0----+----0----+----0----+----0 Inputs A_LAN<9> .............X.......................... 1 IDE_BASEADR<5> .XXX.XXXXXX........X...X...XXXX..X...... 16 IDE_BASEADR<4> .XXX.XXXXXX.......X...X....XXXX..X...... 16 A_LAN<0> .....X.................................. 1 D<0> XX.......................X..X..XX....... 6 A_LAN<1> ......X................................. 1 CP_BASEADR<7> .XXXXXXXXXX......X...X.....XXXX..X...... 17 A_LAN<3> ........X............................... 1 A_LAN<2> .......X................................ 1 A_LAN<5> ..........X............................. 1 A_LAN<4> .........X.............................. 1 A_LAN<7> ............X........................... 1 CP_BASEADR<6> .XXXXXXXXXX.....X...X......XXXX..X...... 17 A_LAN<6> ...........X............................ 1 CP_BASEADR<5> .XXXXXXXXXX....X...X.......XXXX..X...... 17 D<6> XX........................X.X..XX....... 6 D<3> XX......................X...X..XX....... 6 CP_BASEADR<4> .XXXXXXXXXX...X...X........XXXX..X...... 17 0----+----1----+----2----+----3----+----4 0 0 0 0 *********************************** FB3 *********************************** Number of function block inputs used/remaining: 31/23 Number of signals used by logic mapping into function block: 31 Signal Total Imp Exp Unused Loc Pin Pin Pin Name Pt Pt Pt Pt # Type Use D<2> 3 2<- /\4 0 FB3_1 39 I/O I/O INT_OUT 1 0 /\2 2 FB3_2 32 GCK/I/O O D<10> 3 0 \/1 1 FB3_3 41 I/O I/O D<12> 6 1<- 0 0 FB3_4 44 I/O I/O $OpTx$INV$116__$INT 3 0 0 2 FB3_5 33 I/O (b) CP_CS 1 0 \/1 3 FB3_6 34 I/O O D<14> 6 1<- 0 0 FB3_7 46 I/O I/O (unused) 0 0 \/1 4 FB3_8 38 GCK/I/O (b) D<9> 3 1<- \/3 0 FB3_9 40 I/O I/O D<15> 6 3<- \/2 0 FB3_10 48 I/O I/O D<11> 3 2<- \/4 0 FB3_11 43 I/O I/O D<13> 6 4<- \/3 0 FB3_12 45 I/O I/O (unused) 0 0 \/5 0 FB3_13 (b) (b) Dout1<2> 18 13<- 0 0 FB3_14 49 I/O I (unused) 0 0 /\5 0 FB3_15 50 I/O I (unused) 0 0 \/5 0 FB3_16 (b) (b) Dout1<0> 19 14<- 0 0 FB3_17 51 I/O I (unused) 0 0 /\5 0 FB3_18 (b) (b) Signals Used by Logic in Function Block 1: $OpTx$INV$116__$INT 12: A<6> 22: DQ<12>.PIN 2: AS 13: Dout1<0> 23: DQ<11>.PIN 3: AUTOBOOT_OFF 14: Dout1<1> 24: DQ<10>.PIN 4: AUTO_CONFIG_DONE<0> 15: Dout1<2> 25: DQ<9>.PIN 5: AUTO_CONFIG_DONE<1> 16: Dout1<3> 26: RESET 6: AUTO_CONFIG_DONE<2> 17: LAN_INT 27: RW 7: A<1> 18: DQ<15>.PIN 28: autoconfig 8: A<2> 19: DQ<14>.PIN 29: cp 9: A<3> 20: DQ<2>.PIN 30: lan 10: A<4> 21: DQ<13>.PIN 31: lan/lan_CLKF 11: A<5> Signal 1 2 3 4 FB Name 0----+----0----+----0----+----0----+----0 Inputs D<2> XX.................X......X.XX.......... 6 INT_OUT ................X....................... 1 D<10> XX.....................X..X.XX.......... 6 D<12> XX..........X........X....X.XX.......... 7 $OpTx$INV$116__$INT .X........................XXXX.......... 5 CP_CS .X..........................X........... 2 D<14> XX............X...X.......X.XX.......... 7 D<9> XX......................X.X.XX.......... 6 D<15> XX.............X.X........X.XX.......... 7 D<11> XX....................X...X.XX.......... 6 D<13> XX...........X......X.....X.XX.......... 7 Dout1<2> .X.XXXXXXXXX..X..........XXX..X......... 15 Dout1<0> .XXXXXXXXXXXX............XXX..X......... 16 0----+----1----+----2----+----3----+----4 0 0 0 0 *********************************** FB4 *********************************** Number of function block inputs used/remaining: 32/22 Number of signals used by logic mapping into function block: 32 Signal Total Imp Exp Unused Loc Pin Pin Pin Name Pt Pt Pt Pt # Type Use DQ<0> 2 0 0 3 FB4_1 118 I/O I/O DQ<6> 2 0 0 3 FB4_2 126 I/O I/O LAN_CS 0 0 0 5 FB4_3 133 I/O O IDE_BASEADR<6> 4 0 0 1 FB4_4 (b) (b) DQ<8> 2 0 0 3 FB4_5 128 I/O I/O DQ<10> 2 0 0 3 FB4_6 129 I/O I/O IDE_BASEADR<2> 4 0 0 1 FB4_7 (b) (b) DQ<12> 2 0 0 3 FB4_8 130 I/O I/O DQ<14> 2 0 0 3 FB4_9 131 I/O I/O IDE_BASEADR<1> 4 0 0 1 FB4_10 135 I/O (b) LAN_WRH 1 0 0 4 FB4_11 132 I/O O LAN_RD 1 0 0 4 FB4_12 134 I/O O A_LAN<12> 1 0 0 4 FB4_13 137 I/O O A_LAN<13> 1 0 0 4 FB4_14 136 I/O O A_LAN<10> 1 0 0 4 FB4_15 138 I/O O A_LAN<11> 1 0 0 4 FB4_16 139 I/O O A_LAN<8> 1 0 0 4 FB4_17 140 I/O O IDE_BASEADR<0> 4 0 0 1 FB4_18 (b) (b) Signals Used by Logic in Function Block 1: $OpTx$INV$115__$INT 12: A<4> 23: IDE_BASEADR<0> 2: AS 13: A<5> 24: IDE_BASEADR<1> 3: AUTO_CONFIG_DONE<0> 14: A<6> 25: IDE_BASEADR<2> 4: AUTO_CONFIG_DONE<1> 15: A<9> 26: IDE_BASEADR<6> 5: A<1> 16: D<0>.PIN 27: RESET 6: A<11> 17: D<10>.PIN 28: RW 7: A<12> 18: D<12>.PIN 29: UDS 8: A<13> 19: D<14>.PIN 30: autoconfig 9: A<14> 20: D<6>.PIN 31: lan 10: A<2> 21: D<8>.PIN 32: lan/lan_CLKF 11: A<3> 22: D<9>.PIN Signal 1 2 3 4 FB Name 0----+----0----+----0----+----0----+----0 Inputs DQ<0> X..............X........................ 2 DQ<6> X..................X.................... 2 LAN_CS ........................................ 0 IDE_BASEADR<6> .XXXX....XXXXX....X......XXXXX.X........ 16 DQ<8> X...................X................... 2 DQ<10> X...............X....................... 2 IDE_BASEADR<2> .XXXX....XXXXX..X.......X.XXXX.X........ 16 DQ<12> X................X...................... 2 DQ<14> X.................X..................... 2 IDE_BASEADR<1> .XXXX....XXXXX.......X.X..XXXX.X........ 16 LAN_WRH .X.........................XX.X......... 4 LAN_RD .X.........................X..X......... 3 A_LAN<12> .......X................................ 1 A_LAN<13> ........X............................... 1 A_LAN<10> .....X.................................. 1 A_LAN<11> ......X................................. 1 A_LAN<8> ..............X......................... 1 IDE_BASEADR<0> .XXXX....XXXXX......X.X...XXXX.X........ 16 0----+----1----+----2----+----3----+----4 0 0 0 0 *********************************** FB5 *********************************** Number of function block inputs used/remaining: 39/15 Number of signals used by logic mapping into function block: 39 Signal Total Imp Exp Unused Loc Pin Pin Pin Name Pt Pt Pt Pt # Type Use AUTO_CONFIG_DONE<0> 2 0 0 3 FB5_1 (b) (b) SHUT_UP<1> 3 0 0 2 FB5_2 52 I/O I SHUT_UP<0> 3 0 0 2 FB5_3 59 I/O I AUTO_CONFIG_DONE_CYCLE<2> 3 0 0 2 FB5_4 (b) (b) AUTO_CONFIG_DONE_CYCLE<1> 3 0 0 2 FB5_5 53 I/O I AUTO_CONFIG_DONE_CYCLE<0> 3 0 0 2 FB5_6 54 I/O I $OpTx$INV$115__$INT 3 0 0 2 FB5_7 66 I/O I LAN_BASEADR<7> 4 0 0 1 FB5_8 56 I/O I LAN_BASEADR<6> 4 0 0 1 FB5_9 57 I/O I ROM_B<0> 0 0 0 5 FB5_10 68 I/O O LAN_BASEADR<5> 4 0 0 1 FB5_11 58 I/O I LAN_BASEADR<4> 4 0 0 1 FB5_12 60 I/O I CP_WE 2 0 0 3 FB5_13 70 I/O O LAN_BASEADR<3> 4 0 0 1 FB5_14 61 I/O I LAN_BASEADR<2> 4 0 0 1 FB5_15 64 I/O I LAN_BASEADR<1> 4 0 0 1 FB5_16 (b) (b) ROM_B<1> 0 0 0 5 FB5_17 69 I/O O LAN_BASEADR<0> 4 0 0 1 FB5_18 (b) (b) Signals Used by Logic in Function Block 1: AS 14: D<10>.PIN 27: LAN_BASEADR<5> 2: AUTO_CONFIG_DONE<0> 15: D<11>.PIN 28: LAN_BASEADR<6> 3: AUTO_CONFIG_DONE<1> 16: D<12>.PIN 29: LAN_BASEADR<7> 4: AUTO_CONFIG_DONE<2> 17: D<13>.PIN 30: LDS 5: AUTO_CONFIG_DONE_CYCLE<0> 18: D<14>.PIN 31: RESET 6: AUTO_CONFIG_DONE_CYCLE<1> 19: D<15>.PIN 32: RW 7: AUTO_CONFIG_DONE_CYCLE<2> 20: D<8>.PIN 33: SHUT_UP<0> 8: A<1> 21: D<9>.PIN 34: SHUT_UP<1> 9: A<2> 22: LAN_BASEADR<0> 35: UDS 10: A<3> 23: LAN_BASEADR<1> 36: autoconfig 11: A<4> 24: LAN_BASEADR<2> 37: cp 12: A<5> 25: LAN_BASEADR<3> 38: lan 13: A<6> 26: LAN_BASEADR<4> 39: lan/lan_CLKF Signal 1 2 3 4 FB Name 0----+----0----+----0----+----0----+----0 Inputs AUTO_CONFIG_DONE<0> X...X................................... 2 SHUT_UP<1> XXX....XXXXXX.................XX.XXX..X. 15 SHUT_UP<0> XX.....XXXXXX.................XXX.XX..X. 14 AUTO_CONFIG_DONE_CYCLE<2> XXXX..XX.XXXX.................XX..XX..X. 15 AUTO_CONFIG_DONE_CYCLE<1> XXX..X.X.XXXX.................XX..XX..X. 14 AUTO_CONFIG_DONE_CYCLE<0> XX..X..X.XXXX.................XX..XX..X. 13 $OpTx$INV$115__$INT .............................X.X..X.XX.. 5 LAN_BASEADR<7> XX.....XXXXXX.....X.........X.XX..XX..X. 15 LAN_BASEADR<6> XX.....XXXXXX....X.........X..XX..XX..X. 15 ROM_B<0> ........................................ 0 LAN_BASEADR<5> XX.....XXXXXX...X.........X...XX..XX..X. 15 LAN_BASEADR<4> XX.....XXXXXX..X.........X....XX..XX..X. 15 CP_WE X............................X.X..X.X... 5 LAN_BASEADR<3> XX.....XXXXXX.X.........X.....XX..XX..X. 15 LAN_BASEADR<2> XX.....XXXXXXX.........X......XX..XX..X. 15 LAN_BASEADR<1> XX.....XXXXXX.......X.X.......XX..XX..X. 15 ROM_B<1> ........................................ 0 LAN_BASEADR<0> XX.....XXXXXX......X.X........XX..XX..X. 15 0----+----1----+----2----+----3----+----4 0 0 0 0 *********************************** FB6 *********************************** Number of function block inputs used/remaining: 34/20 Number of signals used by logic mapping into function block: 34 Signal Total Imp Exp Unused Loc Pin Pin Pin Name Pt Pt Pt Pt # Type Use (unused) 0 0 /\5 0 FB6_1 (b) (b) SLAVE 2 0 /\3 0 FB6_2 106 I/O O SHUT_UP<2> 3 0 \/2 0 FB6_3 (b) (b) SLAVE_OBUF__$INT 2 2<- \/5 0 FB6_4 111 I/O I Dout1<3> 14 9<- 0 0 FB6_5 110 I/O (b) DQ<15> 2 1<- /\4 0 FB6_6 112 I/O I/O IDE_BASEADR<7> 4 0 /\1 0 FB6_7 (b) (b) DQ<13> 2 0 0 3 FB6_8 113 I/O I/O DQ<9> 2 0 0 3 FB6_9 116 I/O I/O DQ<11> 2 0 0 3 FB6_10 115 I/O I/O DQ<3> 2 0 0 3 FB6_11 119 I/O I/O DQ<2> 2 0 0 3 FB6_12 120 I/O I/O IDE_BASEADR<3> 4 0 0 1 FB6_13 (b) (b) DQ<5> 2 0 0 3 FB6_14 121 I/O I/O DQ<4> 2 0 0 3 FB6_15 124 I/O I/O DQ<1> 2 0 \/1 2 FB6_16 117 I/O I/O DQ<7> 2 1<- \/4 0 FB6_17 125 I/O I/O Dout1<1> 17 12<- 0 0 FB6_18 (b) (b) Signals Used by Logic in Function Block 1: $OpTx$INV$115__$INT 13: D<13>.PIN 24: IDE_BASEADR<3> 2: AS 14: D<15>.PIN 25: IDE_BASEADR<7> 3: AUTO_CONFIG_DONE<0> 15: D<1>.PIN 26: RESET 4: AUTO_CONFIG_DONE<1> 16: D<2>.PIN 27: RW 5: AUTO_CONFIG_DONE<2> 17: D<3>.PIN 28: SHUT_UP<2> 6: A<1> 18: D<4>.PIN 29: UDS 7: A<2> 19: D<5>.PIN 30: autoconfig 8: A<3> 20: D<7>.PIN 31: cp 9: A<4> 21: D<9>.PIN 32: ide 10: A<5> 22: Dout1<1> 33: lan 11: A<6> 23: Dout1<3> 34: lan/lan_CLKF 12: D<11>.PIN Signal 1 2 3 4 FB Name 0----+----0----+----0----+----0----+----0 Inputs SLAVE .X...........................XXXX....... 5 SHUT_UP<2> .XXXXXXXXXX..............XXXXX...X...... 16 SLAVE_OBUF__$INT .X...........................XXXX....... 5 Dout1<3> .XXXXXXXXXX...........X..XX..X...X...... 15 DQ<15> X............X.......................... 2 IDE_BASEADR<7> .XXX.XXXXXX..X..........XXX.XX...X...... 16 DQ<13> X...........X........................... 2 DQ<9> X...................X................... 2 DQ<11> X..........X............................ 2 DQ<3> X...............X....................... 2 DQ<2> X..............X........................ 2 IDE_BASEADR<3> .XXX.XXXXXXX...........X.XX.XX...X...... 16 DQ<5> X.................X..................... 2 DQ<4> X................X...................... 2 DQ<1> X.............X......................... 2 DQ<7> X..................X.................... 2 Dout1<1> .XXXXXXXXXX..........X...XX..X...X...... 15 0----+----1----+----2----+----3----+----4 0 0 0 0 *********************************** FB7 *********************************** Number of function block inputs used/remaining: 37/17 Number of signals used by logic mapping into function block: 37 Signal Total Imp Exp Unused Loc Pin Pin Pin Name Pt Pt Pt Pt # Type Use (unused) 0 0 /\5 0 FB7_1 (b) (b) CP_RD 1 0 /\1 3 FB7_2 71 I/O O (unused) 0 0 \/5 0 FB7_3 75 I/O I ide 19 14<- 0 0 FB7_4 (b) (b) (unused) 0 0 /\5 0 FB7_5 74 I/O (b) LAN_WRL 1 0 /\4 0 FB7_6 76 I/O O AUTO_CONFIG_DONE<2> 2 0 0 3 FB7_7 77 I/O (b) lan/lan_CLKF 2 0 0 3 FB7_8 78 I/O (b) (unused) 0 0 0 5 FB7_9 80 I/O I (unused) 0 0 0 5 FB7_10 79 I/O (unused) 0 0 0 5 FB7_11 82 I/O I DTACK 0 0 0 5 FB7_12 85 I/O O (unused) 0 0 0 5 FB7_13 81 I/O I (unused) 0 0 0 5 FB7_14 86 I/O I (unused) 0 0 0 5 FB7_15 87 I/O I AUTO_CONFIG_DONE<1> 2 0 \/3 0 FB7_16 83 I/O I (unused) 0 0 \/5 0 FB7_17 88 I/O I cp 19 14<- 0 0 FB7_18 (b) (b) Signals Used by Logic in Function Block 1: AS 14: C3 26: IDE_BASEADR<3> 2: AUTO_CONFIG_DONE_CYCLE<1> 15: CP_BASEADR<0> 27: IDE_BASEADR<4> 3: AUTO_CONFIG_DONE_CYCLE<2> 16: CP_BASEADR<1> 28: IDE_BASEADR<5> 4: A<16> 17: CP_BASEADR<2> 29: IDE_BASEADR<6> 5: A<17> 18: CP_BASEADR<3> 30: IDE_BASEADR<7> 6: A<18> 19: CP_BASEADR<4> 31: LDS 7: A<19> 20: CP_BASEADR<5> 32: RW 8: A<20> 21: CP_BASEADR<6> 33: SHUT_UP<1> 9: A<21> 22: CP_BASEADR<7> 34: SHUT_UP<2> 10: A<22> 23: IDE_BASEADR<0> 35: cp 11: A<23> 24: IDE_BASEADR<1> 36: lan 12: BERR 25: IDE_BASEADR<2> 37: lan/lan_CLKF 13: C1 Signal 1 2 3 4 FB Name 0----+----0----+----0----+----0----+----0 Inputs CP_RD X..............................X..X..... 3 ide ...XXXXXXXXX..........XXXXXXXX..X...X... 19 LAN_WRL X.............................XX...X.... 4 AUTO_CONFIG_DONE<2> X.X..................................... 2 lan/lan_CLKF ............XX.......................... 2 DTACK ........................................ 0 AUTO_CONFIG_DONE<1> XX...................................... 2 cp ...XXXXXXXXX..XXXXXXXX...........X..X... 19 0----+----1----+----2----+----3----+----4 0 0 0 0 *********************************** FB8 *********************************** Number of function block inputs used/remaining: 24/30 Number of signals used by logic mapping into function block: 24 Signal Total Imp Exp Unused Loc Pin Pin Pin Name Pt Pt Pt Pt # Type Use (unused) 0 0 /\5 0 FB8_1 (b) (b) (unused) 0 0 /\4 1 FB8_2 91 I/O I (unused) 0 0 0 5 FB8_3 95 I/O I (unused) 0 0 0 5 FB8_4 97 I/O I (unused) 0 0 0 5 FB8_5 92 I/O I (unused) 0 0 0 5 FB8_6 93 I/O (unused) 0 0 0 5 FB8_7 (b) (unused) 0 0 0 5 FB8_8 94 I/O I (unused) 0 0 0 5 FB8_9 96 I/O (unused) 0 0 0 5 FB8_10 101 I/O (unused) 0 0 0 5 FB8_11 98 I/O I (unused) 0 0 0 5 FB8_12 100 I/O (unused) 0 0 0 5 FB8_13 103 I/O I (unused) 0 0 0 5 FB8_14 102 I/O I autoconfig 4 0 0 1 FB8_15 104 I/O I OWN 1 0 \/1 3 FB8_16 107 I/O O CFOUT 1 1<- \/5 0 FB8_17 105 I/O O lan 19 14<- 0 0 FB8_18 (b) (b) Signals Used by Logic in Function Block 1: AUTO_CONFIG_DONE<0> 9: A<21> 17: LAN_BASEADR<3> 2: AUTO_CONFIG_DONE<1> 10: A<22> 18: LAN_BASEADR<4> 3: AUTO_CONFIG_DONE<2> 11: A<23> 19: LAN_BASEADR<5> 4: A<16> 12: BERR 20: LAN_BASEADR<6> 5: A<17> 13: CFIN 21: LAN_BASEADR<7> 6: A<18> 14: LAN_BASEADR<0> 22: SHUT_UP<0> 7: A<19> 15: LAN_BASEADR<1> 23: SLAVE_OBUF__$INT 8: A<20> 16: LAN_BASEADR<2> 24: lan/lan_CLKF Signal 1 2 3 4 FB Name 0----+----0----+----0----+----0----+----0 Inputs autoconfig XXXXXXXXXXXXX..........X................ 14 OWN ......................X................. 1 CFOUT XXX..................................... 3 lan ...XXXXXXXXX.XXXXXXXXX.X................ 19 0----+----1----+----2----+----3----+----4 0 0 0 0 ******************************* Equations ******************************** ********** Mapped Logic ********** $OpTx$INV$115__$INT <= ((RW) OR (UDS AND LDS) OR (NOT cp AND NOT lan)); $OpTx$INV$116__$INT <= ((NOT RW) OR (AS) OR (NOT autoconfig AND NOT cp AND NOT lan)); FDCPE_AUTO_CONFIG_DONE0: FDCPE port map (AUTO_CONFIG_DONE(0),AUTO_CONFIG_DONE_CYCLE(0),AS,NOT RESET,'0'); FDCPE_AUTO_CONFIG_DONE1: FDCPE port map (AUTO_CONFIG_DONE(1),AUTO_CONFIG_DONE_CYCLE(1),AS,NOT RESET,'0'); FDCPE_AUTO_CONFIG_DONE2: FDCPE port map (AUTO_CONFIG_DONE(2),AUTO_CONFIG_DONE_CYCLE(2),AS,NOT RESET,'0'); FDCPE_AUTO_CONFIG_DONE_CYCLE0: FDCPE port map (AUTO_CONFIG_DONE_CYCLE(0),AUTO_CONFIG_DONE_CYCLE_D(0),lan/lan_CLKF,'0','0'); AUTO_CONFIG_DONE_CYCLE_D(0) <= ((RESET AND AUTO_CONFIG_DONE_CYCLE(0)) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(1) AND A(3) AND A(6) AND RESET AND NOT AUTO_CONFIG_DONE(0) AND autoconfig)); FDCPE_AUTO_CONFIG_DONE_CYCLE1: FDCPE port map (AUTO_CONFIG_DONE_CYCLE(1),AUTO_CONFIG_DONE_CYCLE_D(1),lan/lan_CLKF,'0','0'); AUTO_CONFIG_DONE_CYCLE_D(1) <= ((RESET AND AUTO_CONFIG_DONE_CYCLE(1)) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(1) AND A(3) AND A(6) AND RESET AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND autoconfig)); FDCPE_AUTO_CONFIG_DONE_CYCLE2: FDCPE port map (AUTO_CONFIG_DONE_CYCLE(2),AUTO_CONFIG_DONE_CYCLE_D(2),lan/lan_CLKF,'0','0'); AUTO_CONFIG_DONE_CYCLE_D(2) <= ((RESET AND AUTO_CONFIG_DONE_CYCLE(2)) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(1) AND A(3) AND A(6) AND RESET AND AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND NOT AUTO_CONFIG_DONE(2) AND autoconfig)); A_LAN(0) <= A(1); A_LAN(1) <= A(2); A_LAN(2) <= A(3); A_LAN(3) <= A(4); A_LAN(4) <= A(5); A_LAN(5) <= A(6); A_LAN(6) <= A(7); A_LAN(7) <= A(8); A_LAN(8) <= A(9); A_LAN(9) <= A(10); A_LAN(10) <= A(11); A_LAN(11) <= A(12); A_LAN(12) <= A(13); A_LAN(13) <= A(14); CFOUT <= NOT ((AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND AUTO_CONFIG_DONE(2))); FTCPE_CP_BASEADR0: FTCPE port map (CP_BASEADR(0),CP_BASEADR_T(0),lan/lan_CLKF,'0','0'); CP_BASEADR_T(0) <= ((NOT RESET AND NOT CP_BASEADR(0)) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND NOT AUTO_CONFIG_DONE(2) AND NOT CP_BASEADR(0) AND D(8).PIN AND autoconfig) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND RESET AND AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND NOT AUTO_CONFIG_DONE(2) AND CP_BASEADR(0) AND NOT D(8).PIN AND autoconfig)); FTCPE_CP_BASEADR1: FTCPE port map (CP_BASEADR(1),CP_BASEADR_T(1),lan/lan_CLKF,'0','0'); CP_BASEADR_T(1) <= ((NOT RESET AND NOT CP_BASEADR(1)) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND NOT AUTO_CONFIG_DONE(2) AND NOT CP_BASEADR(1) AND D(9).PIN AND autoconfig) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND RESET AND AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND NOT AUTO_CONFIG_DONE(2) AND CP_BASEADR(1) AND NOT D(9).PIN AND autoconfig)); FTCPE_CP_BASEADR2: FTCPE port map (CP_BASEADR(2),CP_BASEADR_T(2),lan/lan_CLKF,'0','0'); CP_BASEADR_T(2) <= ((NOT RESET AND NOT CP_BASEADR(2)) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND NOT AUTO_CONFIG_DONE(2) AND NOT CP_BASEADR(2) AND D(10).PIN AND autoconfig) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND RESET AND AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND NOT AUTO_CONFIG_DONE(2) AND CP_BASEADR(2) AND NOT D(10).PIN AND autoconfig)); FTCPE_CP_BASEADR3: FTCPE port map (CP_BASEADR(3),CP_BASEADR_T(3),lan/lan_CLKF,'0','0'); CP_BASEADR_T(3) <= ((NOT RESET AND NOT CP_BASEADR(3)) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND NOT AUTO_CONFIG_DONE(2) AND NOT CP_BASEADR(3) AND D(11).PIN AND autoconfig) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND RESET AND AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND NOT AUTO_CONFIG_DONE(2) AND CP_BASEADR(3) AND NOT D(11).PIN AND autoconfig)); FTCPE_CP_BASEADR4: FTCPE port map (CP_BASEADR(4),CP_BASEADR_T(4),lan/lan_CLKF,'0','0'); CP_BASEADR_T(4) <= ((NOT RESET AND NOT CP_BASEADR(4)) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND NOT AUTO_CONFIG_DONE(2) AND NOT CP_BASEADR(4) AND D(12).PIN AND autoconfig) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND RESET AND AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND NOT AUTO_CONFIG_DONE(2) AND CP_BASEADR(4) AND NOT D(12).PIN AND autoconfig)); FTCPE_CP_BASEADR5: FTCPE port map (CP_BASEADR(5),CP_BASEADR_T(5),lan/lan_CLKF,'0','0'); CP_BASEADR_T(5) <= ((NOT RESET AND NOT CP_BASEADR(5)) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND NOT AUTO_CONFIG_DONE(2) AND NOT CP_BASEADR(5) AND D(13).PIN AND autoconfig) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND RESET AND AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND NOT AUTO_CONFIG_DONE(2) AND CP_BASEADR(5) AND NOT D(13).PIN AND autoconfig)); FTCPE_CP_BASEADR6: FTCPE port map (CP_BASEADR(6),CP_BASEADR_T(6),lan/lan_CLKF,'0','0'); CP_BASEADR_T(6) <= ((NOT RESET AND NOT CP_BASEADR(6)) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND NOT AUTO_CONFIG_DONE(2) AND NOT CP_BASEADR(6) AND D(14).PIN AND autoconfig) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND RESET AND AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND NOT AUTO_CONFIG_DONE(2) AND CP_BASEADR(6) AND NOT D(14).PIN AND autoconfig)); FTCPE_CP_BASEADR7: FTCPE port map (CP_BASEADR(7),CP_BASEADR_T(7),lan/lan_CLKF,'0','0'); CP_BASEADR_T(7) <= ((NOT RESET AND NOT CP_BASEADR(7)) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND NOT AUTO_CONFIG_DONE(2) AND NOT CP_BASEADR(7) AND D(15).PIN AND autoconfig) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND RESET AND AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND NOT AUTO_CONFIG_DONE(2) AND CP_BASEADR(7) AND NOT D(15).PIN AND autoconfig)); CP_CS <= NOT ((NOT AS AND cp)); CP_RD <= NOT ((RW AND NOT AS AND cp)); CP_WE <= NOT (((NOT UDS AND NOT RW AND NOT AS AND cp) OR (NOT RW AND NOT AS AND NOT LDS AND cp))); D_I(0) <= NOT (((RW AND NOT AS AND NOT DQ(0).PIN AND cp) OR (RW AND NOT AS AND NOT DQ(0).PIN AND lan))); D(0) <= D_I(0) when D_OE(0) = '1' else 'Z'; D_OE(0) <= NOT $OpTx$INV$116__$INT; D_I(1) <= NOT (((RW AND NOT AS AND NOT DQ(1).PIN AND cp) OR (RW AND NOT AS AND NOT DQ(1).PIN AND lan))); D(1) <= D_I(1) when D_OE(1) = '1' else 'Z'; D_OE(1) <= NOT $OpTx$INV$116__$INT; D_I(2) <= NOT (((RW AND NOT AS AND NOT DQ(2).PIN AND cp) OR (RW AND NOT AS AND NOT DQ(2).PIN AND lan))); D(2) <= D_I(2) when D_OE(2) = '1' else 'Z'; D_OE(2) <= NOT $OpTx$INV$116__$INT; D_I(3) <= NOT (((RW AND NOT AS AND NOT DQ(3).PIN AND cp) OR (RW AND NOT AS AND NOT DQ(3).PIN AND lan))); D(3) <= D_I(3) when D_OE(3) = '1' else 'Z'; D_OE(3) <= NOT $OpTx$INV$116__$INT; D_I(4) <= NOT (((RW AND NOT AS AND NOT DQ(4).PIN AND cp) OR (RW AND NOT AS AND NOT DQ(4).PIN AND lan))); D(4) <= D_I(4) when D_OE(4) = '1' else 'Z'; D_OE(4) <= NOT $OpTx$INV$116__$INT; D_I(5) <= NOT (((RW AND NOT AS AND NOT DQ(5).PIN AND cp) OR (RW AND NOT AS AND NOT DQ(5).PIN AND lan))); D(5) <= D_I(5) when D_OE(5) = '1' else 'Z'; D_OE(5) <= NOT $OpTx$INV$116__$INT; D_I(6) <= NOT (((RW AND NOT AS AND NOT DQ(6).PIN AND cp) OR (RW AND NOT AS AND NOT DQ(6).PIN AND lan))); D(6) <= D_I(6) when D_OE(6) = '1' else 'Z'; D_OE(6) <= NOT $OpTx$INV$116__$INT; D_I(7) <= NOT (((RW AND NOT AS AND NOT DQ(7).PIN AND cp) OR (RW AND NOT AS AND NOT DQ(7).PIN AND lan))); D(7) <= D_I(7) when D_OE(7) = '1' else 'Z'; D_OE(7) <= NOT $OpTx$INV$116__$INT; D_I(8) <= NOT (((RW AND NOT AS AND NOT DQ(8).PIN AND cp) OR (RW AND NOT AS AND NOT DQ(8).PIN AND lan))); D(8) <= D_I(8) when D_OE(8) = '1' else 'Z'; D_OE(8) <= NOT $OpTx$INV$116__$INT; D_I(9) <= NOT (((RW AND NOT AS AND NOT DQ(9).PIN AND lan) OR (RW AND NOT AS AND NOT DQ(9).PIN AND cp))); D(9) <= D_I(9) when D_OE(9) = '1' else 'Z'; D_OE(9) <= NOT $OpTx$INV$116__$INT; D_I(10) <= NOT (((RW AND NOT AS AND NOT DQ(10).PIN AND cp) OR (RW AND NOT AS AND NOT DQ(10).PIN AND lan))); D(10) <= D_I(10) when D_OE(10) = '1' else 'Z'; D_OE(10) <= NOT $OpTx$INV$116__$INT; D_I(11) <= NOT (((RW AND NOT AS AND NOT DQ(11).PIN AND cp) OR (RW AND NOT AS AND NOT DQ(11).PIN AND lan))); D(11) <= D_I(11) when D_OE(11) = '1' else 'Z'; D_OE(11) <= NOT $OpTx$INV$116__$INT; D_I(12) <= ((RW AND NOT AS AND lan AND DQ(12).PIN) OR (NOT RW AND Dout1(0)) OR (AS AND Dout1(0)) OR (Dout1(0) AND NOT cp AND NOT lan) OR (RW AND NOT AS AND cp AND DQ(12).PIN)); D(12) <= D_I(12) when D_OE(12) = '1' else 'Z'; D_OE(12) <= NOT $OpTx$INV$116__$INT; D_I(13) <= ((NOT RW AND Dout1(1)) OR (Dout1(1) AND NOT cp AND NOT lan) OR (RW AND NOT AS AND cp AND DQ(13).PIN) OR (RW AND NOT AS AND lan AND DQ(13).PIN) OR (AS AND Dout1(1))); D(13) <= D_I(13) when D_OE(13) = '1' else 'Z'; D_OE(13) <= NOT $OpTx$INV$116__$INT; D_I(14) <= ((RW AND NOT AS AND lan AND DQ(14).PIN) OR (NOT RW AND Dout1(2)) OR (AS AND Dout1(2)) OR (Dout1(2) AND NOT cp AND NOT lan) OR (RW AND NOT AS AND cp AND DQ(14).PIN)); D(14) <= D_I(14) when D_OE(14) = '1' else 'Z'; D_OE(14) <= NOT $OpTx$INV$116__$INT; D_I(15) <= ((Dout1(3) AND NOT cp AND NOT lan) OR (RW AND NOT AS AND cp AND DQ(15).PIN) OR (RW AND NOT AS AND lan AND DQ(15).PIN) OR (NOT RW AND Dout1(3)) OR (AS AND Dout1(3))); D(15) <= D_I(15) when D_OE(15) = '1' else 'Z'; D_OE(15) <= NOT $OpTx$INV$116__$INT; DQ_I(0) <= D(0).PIN; DQ(0) <= DQ_I(0) when DQ_OE(0) = '1' else 'Z'; DQ_OE(0) <= NOT $OpTx$INV$115__$INT; DQ_I(1) <= D(1).PIN; DQ(1) <= DQ_I(1) when DQ_OE(1) = '1' else 'Z'; DQ_OE(1) <= NOT $OpTx$INV$115__$INT; DQ_I(2) <= D(2).PIN; DQ(2) <= DQ_I(2) when DQ_OE(2) = '1' else 'Z'; DQ_OE(2) <= NOT $OpTx$INV$115__$INT; DQ_I(3) <= D(3).PIN; DQ(3) <= DQ_I(3) when DQ_OE(3) = '1' else 'Z'; DQ_OE(3) <= NOT $OpTx$INV$115__$INT; DQ_I(4) <= D(4).PIN; DQ(4) <= DQ_I(4) when DQ_OE(4) = '1' else 'Z'; DQ_OE(4) <= NOT $OpTx$INV$115__$INT; DQ_I(5) <= D(5).PIN; DQ(5) <= DQ_I(5) when DQ_OE(5) = '1' else 'Z'; DQ_OE(5) <= NOT $OpTx$INV$115__$INT; DQ_I(6) <= D(6).PIN; DQ(6) <= DQ_I(6) when DQ_OE(6) = '1' else 'Z'; DQ_OE(6) <= NOT $OpTx$INV$115__$INT; DQ_I(7) <= D(7).PIN; DQ(7) <= DQ_I(7) when DQ_OE(7) = '1' else 'Z'; DQ_OE(7) <= NOT $OpTx$INV$115__$INT; DQ_I(8) <= D(8).PIN; DQ(8) <= DQ_I(8) when DQ_OE(8) = '1' else 'Z'; DQ_OE(8) <= NOT $OpTx$INV$115__$INT; DQ_I(9) <= D(9).PIN; DQ(9) <= DQ_I(9) when DQ_OE(9) = '1' else 'Z'; DQ_OE(9) <= NOT $OpTx$INV$115__$INT; DQ_I(10) <= D(10).PIN; DQ(10) <= DQ_I(10) when DQ_OE(10) = '1' else 'Z'; DQ_OE(10) <= NOT $OpTx$INV$115__$INT; DQ_I(11) <= D(11).PIN; DQ(11) <= DQ_I(11) when DQ_OE(11) = '1' else 'Z'; DQ_OE(11) <= NOT $OpTx$INV$115__$INT; DQ_I(12) <= D(12).PIN; DQ(12) <= DQ_I(12) when DQ_OE(12) = '1' else 'Z'; DQ_OE(12) <= NOT $OpTx$INV$115__$INT; DQ_I(13) <= D(13).PIN; DQ(13) <= DQ_I(13) when DQ_OE(13) = '1' else 'Z'; DQ_OE(13) <= NOT $OpTx$INV$115__$INT; DQ_I(14) <= D(14).PIN; DQ(14) <= DQ_I(14) when DQ_OE(14) = '1' else 'Z'; DQ_OE(14) <= NOT $OpTx$INV$115__$INT; DQ_I(15) <= D(15).PIN; DQ(15) <= DQ_I(15) when DQ_OE(15) = '1' else 'Z'; DQ_OE(15) <= NOT $OpTx$INV$115__$INT; DTACK_I <= '0'; DTACK <= DTACK_I when DTACK_OE = '1' else 'Z'; DTACK_OE <= '0'; FDCPE_Dout10: FDCPE port map (Dout1(0),Dout1_D(0),lan/lan_CLKF,'0','0'); Dout1_D(0) <= ((NOT RW AND RESET AND NOT Dout1(0)) OR (AS AND RESET AND NOT Dout1(0)) OR (RESET AND NOT Dout1(0) AND NOT autoconfig) OR (RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND NOT A(3) AND RESET AND NOT AUTO_CONFIG_DONE(0) AND autoconfig) OR (RW AND NOT AS AND NOT A(5) AND A(2) AND NOT A(1) AND NOT A(3) AND NOT A(6) AND RESET AND AUTO_CONFIG_DONE(1) AND NOT AUTO_CONFIG_DONE(2) AND autoconfig) OR (D_2_IOBUFE.EXP) OR (RESET AND AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND AUTO_CONFIG_DONE(2) AND NOT Dout1(0)) OR (RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(3) AND A(6) AND RESET AND NOT AUTO_CONFIG_DONE(0) AND autoconfig) OR (RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(3) AND A(6) AND RESET AND NOT AUTO_CONFIG_DONE(1) AND autoconfig) OR (RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(3) AND A(6) AND RESET AND NOT AUTO_CONFIG_DONE(2) AND autoconfig) OR (RW AND NOT AS AND NOT A(5) AND A(2) AND NOT A(1) AND NOT A(3) AND NOT A(6) AND RESET AND NOT AUTO_CONFIG_DONE(0) AND autoconfig) OR (RW AND NOT AS AND NOT A(4) AND A(2) AND A(1) AND NOT A(3) AND NOT A(6) AND RESET AND NOT AUTO_CONFIG_DONE(0) AND autoconfig) OR (RW AND NOT AS AND NOT A(5) AND A(4) AND NOT A(2) AND A(3) AND NOT A(6) AND RESET AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND autoconfig) OR (RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND NOT A(3) AND RESET AND AUTO_CONFIG_DONE(1) AND NOT AUTO_CONFIG_DONE(2) AND autoconfig) OR (RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND NOT A(3) AND RESET AND NOT AUTO_CONFIG_DONE(1) AND AUTOBOOT_OFF AND autoconfig)); FDCPE_Dout11: FDCPE port map (Dout1(1),Dout1_D(1),lan/lan_CLKF,'0','0'); Dout1_D(1) <= ((SLAVE_OBUF.EXP) OR (RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(3) AND RESET AND NOT AUTO_CONFIG_DONE(0) AND autoconfig) OR (RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(3) AND RESET AND NOT AUTO_CONFIG_DONE(2) AND autoconfig) OR (RW AND NOT AS AND NOT A(5) AND NOT A(4) AND A(1) AND NOT A(3) AND NOT A(6) AND RESET AND NOT AUTO_CONFIG_DONE(1) AND autoconfig) OR (RW AND NOT AS AND NOT A(5) AND NOT A(2) AND A(1) AND NOT A(3) AND NOT A(6) AND RESET AND NOT AUTO_CONFIG_DONE(0) AND autoconfig) OR (RW AND NOT AS AND NOT A(5) AND A(4) AND A(2) AND NOT A(1) AND NOT A(6) AND RESET AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND autoconfig) OR (NOT RW AND RESET AND NOT Dout1(1)) OR (RESET AND AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND AUTO_CONFIG_DONE(2) AND NOT Dout1(1)) OR (RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(3) AND RESET AND NOT AUTO_CONFIG_DONE(1) AND autoconfig) OR (RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(3) AND NOT A(6) AND RESET AND NOT AUTO_CONFIG_DONE(0) AND autoconfig) OR (AS AND RESET AND NOT Dout1(1)) OR (RESET AND NOT Dout1(1) AND NOT autoconfig) OR (RW AND NOT AS AND NOT A(5) AND A(4) AND A(2) AND A(3) AND NOT A(6) AND RESET AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND autoconfig) OR (RW AND NOT AS AND NOT A(5) AND NOT A(2) AND A(1) AND NOT A(3) AND NOT A(6) AND RESET AND AUTO_CONFIG_DONE(1) AND NOT AUTO_CONFIG_DONE(2) AND autoconfig)); FDCPE_Dout12: FDCPE port map (Dout1(2),Dout1_D(2),lan/lan_CLKF,'0','0'); Dout1_D(2) <= ((D_13_IOBUFE.EXP) OR (NOT RW AND RESET AND NOT Dout1(2)) OR (AS AND RESET AND NOT Dout1(2)) OR (RESET AND NOT Dout1(2) AND NOT autoconfig) OR (RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND A(1) AND NOT A(3) AND RESET AND NOT AUTO_CONFIG_DONE(2) AND autoconfig) OR (RW AND NOT AS AND NOT A(5) AND A(4) AND A(2) AND A(1) AND NOT A(3) AND NOT A(6) AND RESET AND NOT AUTO_CONFIG_DONE(2) AND autoconfig) OR (RESET AND AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND AUTO_CONFIG_DONE(2) AND NOT Dout1(2)) OR (RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND A(1) AND NOT A(3) AND RESET AND NOT AUTO_CONFIG_DONE(0) AND autoconfig) OR (RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(3) AND A(6) AND RESET AND NOT AUTO_CONFIG_DONE(0) AND autoconfig) OR (RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(3) AND A(6) AND RESET AND NOT AUTO_CONFIG_DONE(1) AND autoconfig) OR (RW AND NOT AS AND NOT A(5) AND A(4) AND A(2) AND A(1) AND NOT A(3) AND NOT A(6) AND RESET AND NOT AUTO_CONFIG_DONE(0) AND autoconfig) OR (RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND A(1) AND NOT A(3) AND RESET AND NOT AUTO_CONFIG_DONE(1) AND autoconfig) OR (RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(3) AND A(6) AND RESET AND NOT AUTO_CONFIG_DONE(2) AND autoconfig) OR (RW AND NOT AS AND NOT A(5) AND A(4) AND A(2) AND A(1) AND NOT A(3) AND NOT A(6) AND RESET AND NOT AUTO_CONFIG_DONE(1) AND autoconfig) OR (RW AND NOT AS AND NOT A(5) AND NOT A(4) AND A(2) AND NOT A(3) AND NOT A(6) AND RESET AND AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND NOT AUTO_CONFIG_DONE(2) AND autoconfig)); FDCPE_Dout13: FDCPE port map (Dout1(3),Dout1_D(3),lan/lan_CLKF,'0','0'); Dout1_D(3) <= ((RESET AND AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND AUTO_CONFIG_DONE(2) AND NOT Dout1(3)) OR (RW AND NOT AS AND NOT A(5) AND A(1) AND NOT A(3) AND NOT A(6) AND RESET AND NOT AUTO_CONFIG_DONE(0) AND autoconfig) OR (RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(3) AND A(6) AND RESET AND NOT AUTO_CONFIG_DONE(0) AND autoconfig) OR (RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(3) AND A(6) AND RESET AND NOT AUTO_CONFIG_DONE(1) AND autoconfig) OR (RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(3) AND A(6) AND RESET AND NOT AUTO_CONFIG_DONE(2) AND autoconfig) OR (RW AND NOT AS AND NOT A(5) AND A(1) AND NOT A(3) AND NOT A(6) AND RESET AND AUTO_CONFIG_DONE(1) AND NOT AUTO_CONFIG_DONE(2) AND autoconfig) OR (RW AND NOT AS AND NOT A(5) AND A(4) AND A(2) AND A(1) AND NOT A(6) AND RESET AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND autoconfig) OR (RW AND NOT AS AND A(5) AND NOT A(4) AND A(2) AND NOT A(1) AND NOT A(3) AND NOT A(6) AND RESET AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND autoconfig) OR (RW AND NOT AS AND NOT A(5) AND A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND NOT A(6) AND RESET AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND autoconfig) OR (NOT RW AND RESET AND NOT Dout1(3)) OR (AS AND RESET AND NOT Dout1(3)) OR (RESET AND NOT Dout1(3) AND NOT autoconfig) OR (RW AND NOT AS AND NOT A(5) AND NOT A(2) AND A(1) AND NOT A(3) AND NOT A(6) AND RESET AND NOT AUTO_CONFIG_DONE(1) AND autoconfig)); IDE_A(0) <= A(9); IDE_A(1) <= A(10); IDE_A(2) <= A(11); FTCPE_IDE_BASEADR0: FTCPE port map (IDE_BASEADR(0),IDE_BASEADR_T(0),lan/lan_CLKF,'0','0'); IDE_BASEADR_T(0) <= ((NOT RESET AND NOT IDE_BASEADR(0)) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND NOT IDE_BASEADR(0) AND D(8).PIN AND autoconfig) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND RESET AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND IDE_BASEADR(0) AND NOT D(8).PIN AND autoconfig)); FTCPE_IDE_BASEADR1: FTCPE port map (IDE_BASEADR(1),IDE_BASEADR_T(1),lan/lan_CLKF,'0','0'); IDE_BASEADR_T(1) <= ((NOT RESET AND NOT IDE_BASEADR(1)) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND NOT IDE_BASEADR(1) AND D(9).PIN AND autoconfig) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND RESET AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND IDE_BASEADR(1) AND NOT D(9).PIN AND autoconfig)); FTCPE_IDE_BASEADR2: FTCPE port map (IDE_BASEADR(2),IDE_BASEADR_T(2),lan/lan_CLKF,'0','0'); IDE_BASEADR_T(2) <= ((NOT RESET AND NOT IDE_BASEADR(2)) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND NOT IDE_BASEADR(2) AND D(10).PIN AND autoconfig) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND RESET AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND IDE_BASEADR(2) AND NOT D(10).PIN AND autoconfig)); FTCPE_IDE_BASEADR3: FTCPE port map (IDE_BASEADR(3),IDE_BASEADR_T(3),lan/lan_CLKF,'0','0'); IDE_BASEADR_T(3) <= ((NOT RESET AND NOT IDE_BASEADR(3)) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND NOT IDE_BASEADR(3) AND D(11).PIN AND autoconfig) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND RESET AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND IDE_BASEADR(3) AND NOT D(11).PIN AND autoconfig)); FTCPE_IDE_BASEADR4: FTCPE port map (IDE_BASEADR(4),IDE_BASEADR_T(4),lan/lan_CLKF,'0','0'); IDE_BASEADR_T(4) <= ((NOT RESET AND NOT IDE_BASEADR(4)) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND NOT IDE_BASEADR(4) AND D(12).PIN AND autoconfig) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND RESET AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND IDE_BASEADR(4) AND NOT D(12).PIN AND autoconfig)); FTCPE_IDE_BASEADR5: FTCPE port map (IDE_BASEADR(5),IDE_BASEADR_T(5),lan/lan_CLKF,'0','0'); IDE_BASEADR_T(5) <= ((NOT RESET AND NOT IDE_BASEADR(5)) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND NOT IDE_BASEADR(5) AND D(13).PIN AND autoconfig) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND RESET AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND IDE_BASEADR(5) AND NOT D(13).PIN AND autoconfig)); FTCPE_IDE_BASEADR6: FTCPE port map (IDE_BASEADR(6),IDE_BASEADR_T(6),lan/lan_CLKF,'0','0'); IDE_BASEADR_T(6) <= ((NOT RESET AND NOT IDE_BASEADR(6)) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND NOT IDE_BASEADR(6) AND D(14).PIN AND autoconfig) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND RESET AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND IDE_BASEADR(6) AND NOT D(14).PIN AND autoconfig)); FTCPE_IDE_BASEADR7: FTCPE port map (IDE_BASEADR(7),IDE_BASEADR_T(7),lan/lan_CLKF,'0','0'); IDE_BASEADR_T(7) <= ((NOT RESET AND NOT IDE_BASEADR(7)) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND NOT IDE_BASEADR(7) AND D(15).PIN AND autoconfig) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND RESET AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND IDE_BASEADR(7) AND NOT D(15).PIN AND autoconfig)); IDE_CS(0) <= NOT A(12); IDE_CS(1) <= NOT A(13); FDCPE_IDE_ENABLE: FDCPE port map (IDE_ENABLE,IDE_ENABLE_D,lan/lan_CLKF,'0','0'); IDE_ENABLE_D <= ((RESET AND NOT IDE_ENABLE) OR (NOT RW AND NOT AS AND RESET AND ide)); FDCPE_IDE_R: FDCPE port map (IDE_R,IDE_R_D,lan/lan_CLKF,'0','0'); IDE_R_D <= (RW AND NOT AS AND RESET AND NOT IDE_ENABLE AND ide); FDCPE_IDE_W: FDCPE port map (IDE_W,IDE_W_D,lan/lan_CLKF,'0','0'); IDE_W_D <= (NOT RW AND NOT AS AND RESET AND ide); INT_OUT_I <= '0'; INT_OUT <= INT_OUT_I when INT_OUT_OE = '1' else 'Z'; INT_OUT_OE <= NOT LAN_INT; FTCPE_LAN_BASEADR0: FTCPE port map (LAN_BASEADR(0),LAN_BASEADR_T(0),lan/lan_CLKF,'0','0'); LAN_BASEADR_T(0) <= ((NOT RESET AND NOT LAN_BASEADR(0)) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND NOT AUTO_CONFIG_DONE(0) AND NOT LAN_BASEADR(0) AND D(8).PIN AND autoconfig) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND RESET AND NOT AUTO_CONFIG_DONE(0) AND LAN_BASEADR(0) AND NOT D(8).PIN AND autoconfig)); FTCPE_LAN_BASEADR1: FTCPE port map (LAN_BASEADR(1),LAN_BASEADR_T(1),lan/lan_CLKF,'0','0'); LAN_BASEADR_T(1) <= ((NOT RESET AND NOT LAN_BASEADR(1)) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND NOT AUTO_CONFIG_DONE(0) AND NOT LAN_BASEADR(1) AND D(9).PIN AND autoconfig) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND RESET AND NOT AUTO_CONFIG_DONE(0) AND LAN_BASEADR(1) AND NOT D(9).PIN AND autoconfig)); FTCPE_LAN_BASEADR2: FTCPE port map (LAN_BASEADR(2),LAN_BASEADR_T(2),lan/lan_CLKF,'0','0'); LAN_BASEADR_T(2) <= ((NOT RESET AND NOT LAN_BASEADR(2)) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND NOT AUTO_CONFIG_DONE(0) AND NOT LAN_BASEADR(2) AND D(10).PIN AND autoconfig) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND RESET AND NOT AUTO_CONFIG_DONE(0) AND LAN_BASEADR(2) AND NOT D(10).PIN AND autoconfig)); FTCPE_LAN_BASEADR3: FTCPE port map (LAN_BASEADR(3),LAN_BASEADR_T(3),lan/lan_CLKF,'0','0'); LAN_BASEADR_T(3) <= ((NOT RESET AND NOT LAN_BASEADR(3)) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND NOT AUTO_CONFIG_DONE(0) AND NOT LAN_BASEADR(3) AND D(11).PIN AND autoconfig) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND RESET AND NOT AUTO_CONFIG_DONE(0) AND LAN_BASEADR(3) AND NOT D(11).PIN AND autoconfig)); FTCPE_LAN_BASEADR4: FTCPE port map (LAN_BASEADR(4),LAN_BASEADR_T(4),lan/lan_CLKF,'0','0'); LAN_BASEADR_T(4) <= ((NOT RESET AND NOT LAN_BASEADR(4)) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND NOT AUTO_CONFIG_DONE(0) AND NOT LAN_BASEADR(4) AND D(12).PIN AND autoconfig) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND RESET AND NOT AUTO_CONFIG_DONE(0) AND LAN_BASEADR(4) AND NOT D(12).PIN AND autoconfig)); FTCPE_LAN_BASEADR5: FTCPE port map (LAN_BASEADR(5),LAN_BASEADR_T(5),lan/lan_CLKF,'0','0'); LAN_BASEADR_T(5) <= ((NOT RESET AND NOT LAN_BASEADR(5)) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND NOT AUTO_CONFIG_DONE(0) AND NOT LAN_BASEADR(5) AND D(13).PIN AND autoconfig) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND RESET AND NOT AUTO_CONFIG_DONE(0) AND LAN_BASEADR(5) AND NOT D(13).PIN AND autoconfig)); FTCPE_LAN_BASEADR6: FTCPE port map (LAN_BASEADR(6),LAN_BASEADR_T(6),lan/lan_CLKF,'0','0'); LAN_BASEADR_T(6) <= ((NOT RESET AND NOT LAN_BASEADR(6)) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND NOT AUTO_CONFIG_DONE(0) AND NOT LAN_BASEADR(6) AND D(14).PIN AND autoconfig) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND RESET AND NOT AUTO_CONFIG_DONE(0) AND LAN_BASEADR(6) AND NOT D(14).PIN AND autoconfig)); FTCPE_LAN_BASEADR7: FTCPE port map (LAN_BASEADR(7),LAN_BASEADR_T(7),lan/lan_CLKF,'0','0'); LAN_BASEADR_T(7) <= ((NOT RESET AND NOT LAN_BASEADR(7)) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND NOT AUTO_CONFIG_DONE(0) AND NOT LAN_BASEADR(7) AND D(15).PIN AND autoconfig) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND RESET AND NOT AUTO_CONFIG_DONE(0) AND LAN_BASEADR(7) AND NOT D(15).PIN AND autoconfig)); LAN_CS <= '1'; LAN_RD <= (RW AND NOT AS AND lan); LAN_WRH <= (NOT UDS AND NOT RW AND NOT AS AND lan); LAN_WRL <= (NOT RW AND NOT AS AND NOT LDS AND lan); OWN_I <= '0'; OWN <= OWN_I when OWN_OE = '1' else 'Z'; OWN_OE <= NOT SLAVE_OBUF__$INT; ROM_B(0) <= '0'; ROM_B(1) <= '0'; FDCPE_ROM_OE: FDCPE port map (ROM_OE,ROM_OE_D,lan/lan_CLKF,'0','0'); ROM_OE_D <= (RW AND NOT AS AND RESET AND IDE_ENABLE AND ide); FDCPE_SHUT_UP0: FDCPE port map (SHUT_UP(0),SHUT_UP_D(0),lan/lan_CLKF,'0','0'); SHUT_UP_D(0) <= ((RESET AND NOT SHUT_UP(0)) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND RESET AND NOT AUTO_CONFIG_DONE(0) AND autoconfig)); FDCPE_SHUT_UP1: FDCPE port map (SHUT_UP(1),SHUT_UP_D(1),lan/lan_CLKF,'0','0'); SHUT_UP_D(1) <= ((RESET AND NOT SHUT_UP(1)) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND RESET AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND autoconfig)); FDCPE_SHUT_UP2: FDCPE port map (SHUT_UP(2),SHUT_UP_D(2),lan/lan_CLKF,'0','0'); SHUT_UP_D(2) <= ((RESET AND NOT SHUT_UP(2)) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(2) AND NOT A(1) AND A(3) AND A(6) AND RESET AND AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND NOT AUTO_CONFIG_DONE(2) AND autoconfig)); SLAVE <= ((AS) OR (NOT autoconfig AND NOT cp AND NOT lan AND NOT ide)); SLAVE_OBUF__$INT <= ((AS) OR (NOT autoconfig AND NOT cp AND NOT lan AND NOT ide)); FDCPE_autoconfig: FDCPE port map (autoconfig,autoconfig_D,lan/lan_CLKF,'0','0'); autoconfig_D <= ((BERR AND A(22) AND A(21) AND A(19) AND A(23) AND NOT CFIN AND NOT A(17) AND NOT AUTO_CONFIG_DONE(0) AND NOT A(20) AND NOT A(18) AND NOT A(16)) OR (BERR AND A(22) AND A(21) AND A(19) AND A(23) AND NOT CFIN AND NOT A(17) AND NOT AUTO_CONFIG_DONE(1) AND NOT A(20) AND NOT A(18) AND NOT A(16)) OR (BERR AND A(22) AND A(21) AND A(19) AND A(23) AND NOT CFIN AND NOT A(17) AND NOT AUTO_CONFIG_DONE(2) AND NOT A(20) AND NOT A(18) AND NOT A(16))); FDCPE_cp: FDCPE port map (cp,cp_D,lan/lan_CLKF,'0','0'); cp_D <= ((NOT BERR) OR (SHUT_UP(2)) OR (CP_RD_OBUF.EXP) OR (A(22) AND NOT CP_BASEADR(6)) OR (NOT A(22) AND CP_BASEADR(6)) OR (A(23) AND NOT CP_BASEADR(7)) OR (NOT A(23) AND CP_BASEADR(7)) OR (NOT A(17) AND CP_BASEADR(1)) OR (AUTO_CONFIG_DONE(1).EXP) OR (A(17) AND NOT CP_BASEADR(1)) OR (CP_BASEADR(0) AND NOT A(16)) OR (NOT CP_BASEADR(0) AND A(16)) OR (CP_BASEADR(2) AND NOT A(18)) OR (NOT CP_BASEADR(2) AND A(18)) OR (A(19) AND NOT CP_BASEADR(3)) OR (NOT A(19) AND CP_BASEADR(3))); FDCPE_ide: FDCPE port map (ide,ide_D,lan/lan_CLKF,'0','0'); ide_D <= ((NOT BERR) OR (SHUT_UP(1)) OR (A(17) AND NOT IDE_BASEADR(1)) OR (IDE_BASEADR(0) AND NOT A(16)) OR (NOT IDE_BASEADR(0) AND A(16)) OR (IDE_BASEADR(2) AND NOT A(18)) OR (NOT IDE_BASEADR(2) AND A(18)) OR (LAN_WRL_OBUF.EXP) OR (A(22) AND NOT IDE_BASEADR(6)) OR (NOT A(22) AND IDE_BASEADR(6)) OR (A(23) AND NOT IDE_BASEADR(7)) OR (NOT A(23) AND IDE_BASEADR(7)) OR (NOT A(17) AND IDE_BASEADR(1)) OR (A(19) AND NOT IDE_BASEADR(3)) OR (NOT A(19) AND IDE_BASEADR(3))); FDCPE_lan: FDCPE port map (lan,lan_D,lan/lan_CLKF,'0','0'); lan_D <= ((NOT BERR) OR (SHUT_UP(0)) OR (EXP21_.EXP) OR (A(22) AND NOT LAN_BASEADR(6)) OR (NOT A(22) AND LAN_BASEADR(6)) OR (A(23) AND NOT LAN_BASEADR(7)) OR (NOT A(23) AND LAN_BASEADR(7)) OR (NOT A(17) AND LAN_BASEADR(1)) OR (A(17) AND NOT LAN_BASEADR(1)) OR (LAN_BASEADR(0) AND NOT A(16)) OR (NOT LAN_BASEADR(0) AND A(16)) OR (LAN_BASEADR(2) AND NOT A(18)) OR (NOT LAN_BASEADR(2) AND A(18)) OR (A(19) AND NOT LAN_BASEADR(3)) OR (NOT A(19) AND LAN_BASEADR(3))); lan/lan_CLKF <= NOT (C3 XOR lan/lan_CLKF <= NOT (C1); Register Legend: FDCPE (Q,D,C,CLR,PRE,CE); FTCPE (Q,D,C,CLR,PRE,CE); LDCP (Q,D,G,CLR,PRE); ****************************** Device Pin Out ***************************** Device : XC95144XL-10-TQ144 Pin Signal Pin Signal No. Name No. Name 1 VCC 73 VCC 2 D<0> 74 KPR 3 A_LAN<1> 75 AUTOBOOT_OFF 4 A_LAN<0> 76 LAN_WRL 5 A_LAN<3> 77 KPR 6 A_LAN<2> 78 KPR 7 A_LAN<5> 79 KPR 8 VCC 80 AS 9 A_LAN<4> 81 UDS 10 A_LAN<7> 82 LDS 11 A_LAN<6> 83 RW 12 KPR 84 VCC 13 KPR 85 DTACK 14 D<6> 86 A<23> 15 D<3> 87 A<22> 16 D<7> 88 A<21> 17 D<1> 89 GND 18 GND 90 GND 19 D<8> 91 A<20> 20 D<5> 92 A<19> 21 D<4> 93 KPR 22 IDE_CS<0> 94 A<18> 23 IDE_CS<1> 95 A<17> 24 IDE_A<0> 96 KPR 25 IDE_A<2> 97 A<16> 26 IDE_A<1> 98 BERR 27 IDE_R 99 GND 28 IDE_W 100 KPR 29 GND 101 KPR 30 KPR 102 C3 31 KPR 103 C1 32 INT_OUT 104 CFIN 33 KPR 105 CFOUT 34 CP_CS 106 SLAVE 35 ROM_OE 107 OWN 36 GND 108 GND 37 VCC 109 VCC 38 KPR 110 KPR 39 D<2> 111 LAN_INT 40 D<9> 112 DQ<15> 41 D<10> 113 DQ<13> 42 VCC 114 GND 43 D<11> 115 DQ<11> 44 D<12> 116 DQ<9> 45 D<13> 117 DQ<1> 46 D<14> 118 DQ<0> 47 GND 119 DQ<3> 48 D<15> 120 DQ<2> 49 A<5> 121 DQ<5> 50 A<4> 122 TDO 51 A<6> 123 GND 52 A<3> 124 DQ<4> 53 A<7> 125 DQ<7> 54 A<2> 126 DQ<6> 55 VCC 127 VCC 56 A<8> 128 DQ<8> 57 A<1> 129 DQ<10> 58 A<9> 130 DQ<12> 59 A<10> 131 DQ<14> 60 A<11> 132 LAN_WRH 61 A<12> 133 LAN_CS 62 GND 134 LAN_RD 63 TDI 135 KPR 64 A<13> 136 A_LAN<13> 65 TMS 137 A_LAN<12> 66 A<14> 138 A_LAN<10> 67 TCK 139 A_LAN<11> 68 ROM_B<0> 140 A_LAN<8> 69 ROM_B<1> 141 VCC 70 CP_WE 142 A_LAN<9> 71 CP_RD 143 RESET 72 GND 144 GND Legend : NC = Not Connected, unbonded pin PGND = Unused I/O configured as additional Ground pin TIE = Unused I/O floating -- must tie to VCC, GND or other signal KPR = Unused I/O with weak keeper (leave unconnected) VCC = Dedicated Power Pin GND = Dedicated Ground Pin TDI = Test Data In, JTAG pin TDO = Test Data Out, JTAG pin TCK = Test Clock, JTAG pin TMS = Test Mode Select, JTAG pin PROHIBITED = User reserved pin **************************** Compiler Options **************************** Following is a list of all global compiler options used by the fitter run. Device(s) Specified : xc95144xl-10-TQ144 Optimization Method : SPEED Multi-Level Logic Optimization : ON Ignore Timing Specifications : OFF Default Register Power Up Value : LOW Keep User Location Constraints : ON What-You-See-Is-What-You-Get : OFF Exhaustive Fitting : OFF Keep Unused Inputs : OFF Slew Rate : FAST Power Mode : STD Ground on Unused IOs : OFF Set I/O Pin Termination : KEEPER Global Clock Optimization : ON Global Set/Reset Optimization : ON Global Ouput Enable Optimization : ON Input Limit : 54 Pterm Limit : 25