cpldfit: version P.68d Xilinx Inc. Fitter Report Design Name: LAN_IDE_CP Date: 12-15-2016, 7:48PM Device Used: XC95144XL-10-TQ144 Fitting Status: Successful ************************* Mapped Resource Summary ************************** Macrocells Product Terms Function Block Registers Pins Used/Tot Used/Tot Inps Used/Tot Used/Tot Used/Tot 51 /144 ( 35%) 179 /720 ( 25%) 134/432 ( 31%) 26 /144 ( 18%) 54 /117 ( 46%) ** Function Block Resources ** Function Mcells FB Inps Pterms IO Block Used/Tot Used/Tot Used/Tot Used/Tot FB1 16/18 24/54 40/90 13/15 FB2 11/18 24/54 56/90 4/15 FB3 12/18 24/54 25/90 11/15 FB4 3/18 24/54 25/90 0/15 FB5 7/18 23/54 19/90 10/14 FB6 1/18 15/54 14/90 0/13 FB7 1/18 0/54 0/90 8/15 FB8 0/18 0/54 0/90 8/15 ----- ----- ----- ----- 51/144 134/432 179/720 54/117 * - Resource is exhausted ** Global Control Resources ** Global clock net(s) unused. Global output enable net(s) unused. Signal 'RESET' mapped onto global set/reset net GSR. ** Pin Resources ** Signal Type Required Mapped | Pin Type Used Total ------------------------------------|------------------------------------ Input : 26 26 | I/O : 52 109 Output : 19 19 | GCK/IO : 0 3 Bidirectional : 8 8 | GTS/IO : 1 4 GCK : 0 0 | GSR/IO : 1 1 GTS : 0 0 | GSR : 1 1 | ---- ---- Total 54 54 ** Power Data ** There are 51 macrocells in high performance mode (MCHP). There are 0 macrocells in low power mode (MCLP). End of Mapped Resource Summary ************************** Errors and Warnings *************************** WARNING:Cpld - Unable to retrieve the path to the iSE Project Repository. Will use the default filename of 'LAN_IDE_CP.ise'. INFO:Cpld - Inferring BUFG constraint for signal 'CLK_EXT' based upon the LOC constraint 'P30'. It is recommended that you declare this BUFG explicitedly in your design. Note that for certain device families the output of a BUFG constraint can not drive a gated clock, and the BUFG constraint will be ignored. WARNING:Cpld:936 - The output buffer 'SLAVE_OBUF' is missing an input and will be deleted. WARNING:Cpld:936 - The output buffer 'OWN_OBUF' is missing an input and will be deleted. WARNING:Cpld:936 - The output buffer 'OVR_OBUF' is missing an input and will be deleted. WARNING:Cpld:936 - The output buffer 'MTACK_OBUF' is missing an input and will be deleted. WARNING:Cpld:936 - The output buffer 'LAN_WRH_OBUF' is missing an input and will be deleted. WARNING:Cpld:936 - The output buffer 'LAN_RD_OBUF' is missing an input and will be deleted. WARNING:Cpld:936 - The output buffer 'LAN_EN_OBUF' is missing an input and will be deleted. WARNING:Cpld:936 - The output buffer 'LAN_CS_OBUF' is missing an input and will be deleted. WARNING:Cpld:936 - The output buffer 'LAN_CFG<4>_OBUF' is missing an input and will be deleted. WARNING:Cpld:936 - The output buffer 'LAN_CFG<3>_OBUF' is missing an input and will be deleted. WARNING:Cpld:936 - The output buffer 'LAN_CFG<2>_OBUF' is missing an input and will be deleted. WARNING:Cpld:936 - The output buffer 'LAN_CFG<1>_OBUF' is missing an input and will be deleted. WARNING:Cpld:936 - The output buffer 'INT_OUT_OBUF' is missing an input and will be deleted. WARNING:Cpld:936 - The output buffer 'CP_WE_OBUF' is missing an input and will be deleted. WARNING:Cpld:936 - The output buffer 'CP_RD_OBUF' is missing an input and will be deleted. WARNING:Cpld:936 - The output buffer 'CP_CS_OBUF' is missing an input and will be deleted. WARNING:Cpld:936 - The output buffer 'CFOUT_OBUF' is missing an input and will be deleted. WARNING:Cpld:936 - The output buffer 'A_LAN<9>_OBUF' is missing an input and will be deleted. WARNING:Cpld:936 - The output buffer 'A_LAN<8>_OBUF' is missing an input and will be deleted. WARNING:Cpld:936 - The output buffer 'A_LAN<7>_OBUF' is missing an input and will be deleted. WARNING:Cpld:936 - The output buffer 'A_LAN<6>_OBUF' is missing an input and will be deleted. WARNING:Cpld:936 - The output buffer 'A_LAN<5>_OBUF' is missing an input and will be deleted. WARNING:Cpld:936 - The output buffer 'A_LAN<4>_OBUF' is missing an input and will be deleted. WARNING:Cpld:936 - The output buffer 'A_LAN<3>_OBUF' is missing an input and will be deleted. WARNING:Cpld:936 - The output buffer 'A_LAN<2>_OBUF' is missing an input and will be deleted. WARNING:Cpld:936 - The output buffer 'A_LAN<1>_OBUF' is missing an input and will be deleted. WARNING:Cpld:936 - The output buffer 'A_LAN<13>_OBUF' is missing an input and will be deleted. WARNING:Cpld:936 - The output buffer 'A_LAN<12>_OBUF' is missing an input and will be deleted. WARNING:Cpld:936 - The output buffer 'A_LAN<11>_OBUF' is missing an input and will be deleted. WARNING:Cpld:936 - The output buffer 'A_LAN<10>_OBUF' is missing an input and will be deleted. WARNING:Cpld:936 - The output buffer 'A_LAN<0>_OBUF' is missing an input and will be deleted. WARNING:Cpld:1007 - Removing unused input(s) 'A<14>'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:1007 - Removing unused input(s) 'A<15>'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:1007 - Removing unused input(s) 'A<7>'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:1007 - Removing unused input(s) 'A<8>'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:1007 - Removing unused input(s) 'CFIN'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:1007 - Removing unused input(s) 'CLK_EXT'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:1007 - Removing unused input(s) 'CP_IRQ'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:1007 - Removing unused input(s) 'DQ<0>'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:1007 - Removing unused input(s) 'DQ<10>'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:1007 - Removing unused input(s) 'DQ<11>'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:1007 - Removing unused input(s) 'DQ<12>'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:1007 - Removing unused input(s) 'DQ<13>'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:1007 - Removing unused input(s) 'DQ<14>'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:1007 - Removing unused input(s) 'DQ<15>'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:1007 - Removing unused input(s) 'DQ<1>'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:1007 - Removing unused input(s) 'DQ<2>'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:1007 - Removing unused input(s) 'DQ<3>'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:1007 - Removing unused input(s) 'DQ<4>'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:1007 - Removing unused input(s) 'DQ<5>'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:1007 - Removing unused input(s) 'DQ<6>'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:1007 - Removing unused input(s) 'DQ<7>'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:1007 - Removing unused input(s) 'DQ<8>'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:1007 - Removing unused input(s) 'DQ<9>'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:1007 - Removing unused input(s) 'DS0'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:1007 - Removing unused input(s) 'DS1'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:1007 - Removing unused input(s) 'FCS'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:1007 - Removing unused input(s) 'IDE_WAIT'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:1007 - Removing unused input(s) 'LAN_INT'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:1007 - Removing unused input(s) 'LDS'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:1007 - Removing unused input(s) 'MTCR'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:1007 - Removing unused input(s) 'Z3'. The input(s) are unused after optimization. Please verify functionality via simulation. WARNING:Cpld:896 - Unable to map all desired signals into function block, FB3, because too many function block product terms are required. Buffering output signal D<12> to allow all signals assigned to this function block to be placed. WARNING:Cpld:896 - Unable to map all desired signals into function block, FB3, because too many function block product terms are required. Buffering output signal D<14> to allow all signals assigned to this function block to be placed. WARNING:Cpld:896 - Unable to map all desired signals into function block, FB3, because too many function block product terms are required. Buffering output signal D<13> to allow all signals assigned to this function block to be placed. WARNING:Cpld:896 - Unable to map all desired signals into function block, FB3, because too many function block product terms are required. Buffering output signal D<15> to allow all signals assigned to this function block to be placed. ************************* Summary of Mapped Logic ************************ ** 27 Outputs ** Signal Total Total Loc Pin Pin Pin Pwr Slew Reg Init Name Pts Inps No. Type Use Mode Rate State IDE_CS<1> 1 1 FB1_1 23 I/O O STD FAST D<7> 1 2 FB1_2 16 I/O O STD FAST D<1> 1 2 FB1_3 17 I/O O STD FAST IDE_A<2> 1 1 FB1_4 25 I/O O STD FAST D<8> 1 2 FB1_5 19 I/O I/O STD FAST D<5> 1 2 FB1_6 20 I/O O STD FAST D<4> 1 2 FB1_8 21 I/O O STD FAST IDE_CS<0> 1 1 FB1_9 22 I/O O STD FAST IDE_A<0> 1 1 FB1_11 24 I/O O STD FAST IDE_A<1> 1 1 FB1_12 26 I/O O STD FAST IDE_R 2 6 FB1_14 27 I/O O STD FAST SET IDE_W 2 5 FB1_15 28 I/O O STD FAST SET ROM_OE 2 6 FB1_16 35 I/O O STD FAST SET D<0> 1 2 FB2_5 2 GTS/I/O O STD FAST D<6> 1 2 FB2_16 14 I/O O STD FAST D<3> 1 2 FB2_17 15 I/O O STD FAST D<2> 1 2 FB3_1 39 I/O O STD FAST D<10> 1 2 FB3_3 41 I/O I/O STD FAST D<12> 2 3 FB3_4 44 I/O I/O STD FAST D<14> 2 3 FB3_7 46 I/O I/O STD FAST D<9> 1 2 FB3_9 40 I/O I/O STD FAST D<15> 2 3 FB3_10 48 I/O I/O STD FAST D<11> 1 2 FB3_11 43 I/O I/O STD FAST D<13> 2 3 FB3_12 45 I/O I/O STD FAST ROM_B<0> 0 0 FB5_10 68 I/O O STD FAST ROM_B<1> 0 0 FB5_17 69 I/O O STD FAST DTACK 0 0 FB7_12 85 I/O O STD FAST ** 24 Buried Nodes ** Signal Total Total Loc Pwr Reg Init Name Pts Inps Mode State AUTOCONFIG_IN_PROGRESS 2 3 FB1_7 STD RESET IDE_ENABLE 3 6 FB1_10 STD RESET D<12>_BUFR 19 16 FB1_18 STD RESET D<14>_BUFR 18 15 FB2_1 STD RESET AUTO_CONFIG_DONE<2> 2 2 FB2_8 STD RESET AUTO_CONFIG_DONE<0> 2 2 FB2_9 STD RESET AUTO_CONFIG_DONE_CYCLE<2> 3 15 FB2_10 STD RESET AUTO_CONFIG_DONE_CYCLE<0> 3 13 FB2_11 STD RESET IDE_BASEADR<7> 4 16 FB2_12 STD RESET IDE_BASEADR<6> 4 16 FB2_13 STD RESET D<13>_BUFR 17 15 FB2_15 STD RESET AUTO_CONFIG_DONE<1> 2 2 FB3_15 STD RESET AUTO_CONFIG_DONE_CYCLE<1> 3 14 FB3_16 STD RESET IDE_BASEADR<3> 4 16 FB3_17 STD RESET IDE_BASEADR<2> 4 16 FB3_18 STD RESET ide 19 19 FB4_1 STD RESET ide/ide_CLKF 2 2 FB4_16 STD autoconfig 4 13 FB4_17 STD RESET SHUT_UP<1> 3 15 FB5_13 STD RESET IDE_BASEADR<5> 4 16 FB5_14 STD RESET IDE_BASEADR<4> 4 16 FB5_15 STD RESET IDE_BASEADR<1> 4 16 FB5_16 STD RESET IDE_BASEADR<0> 4 16 FB5_18 STD RESET D<15>_BUFR 14 15 FB6_17 STD RESET ** 27 Inputs ** Signal Loc Pin Pin Pin Name No. Type Use RESET FB2_2 143 GSR/I/O GSR/I A<5> FB3_14 49 I/O I A<4> FB3_15 50 I/O I A<6> FB3_17 51 I/O I A<3> FB5_2 52 I/O I A<10> FB5_3 59 I/O I A<2> FB5_6 54 I/O I A<1> FB5_9 57 I/O I A<9> FB5_11 58 I/O I A<11> FB5_12 60 I/O I A<12> FB5_14 61 I/O I A<13> FB5_15 64 I/O I AUTOBOOT_OFF FB7_3 75 I/O I AS FB7_9 80 I/O I UDS FB7_13 81 I/O I A<23> FB7_14 86 I/O I A<22> FB7_15 87 I/O I RW FB7_16 83 I/O I A<21> FB7_17 88 I/O I A<20> FB8_2 91 I/O I A<17> FB8_3 95 I/O I A<16> FB8_4 97 I/O I A<19> FB8_5 92 I/O I A<18> FB8_8 94 I/O I BERR FB8_11 98 I/O I C1 FB8_13 103 I/O I C3 FB8_14 102 I/O I Legend: Pin No. - ~ - User Assigned ************************** Function Block Details ************************ Legend: Total Pt - Total product terms used by the macrocell signal Imp Pt - Product terms imported from other macrocells Exp Pt - Product terms exported to other macrocells in direction shown Unused Pt - Unused local product terms remaining in macrocell Loc - Location where logic was mapped in device Pin Type/Use - I - Input GCK - Global Clock O - Output GTS - Global Output Enable (b) - Buried macrocell GSR - Global Set/Reset X - Signal used as input to the macrocell logic. Pin No. - ~ - User Assigned *********************************** FB1 *********************************** Number of function block inputs used/remaining: 24/30 Number of signals used by logic mapping into function block: 24 Signal Total Imp Exp Unused Loc Pin Pin Pin Name Pt Pt Pt Pt # Type Use IDE_CS<1> 1 1<- /\5 0 FB1_1 23 I/O O D<7> 1 0 /\1 3 FB1_2 16 I/O O D<1> 1 0 0 4 FB1_3 17 I/O O IDE_A<2> 1 0 0 4 FB1_4 25 I/O O D<8> 1 0 0 4 FB1_5 19 I/O I/O D<5> 1 0 0 4 FB1_6 20 I/O O AUTOCONFIG_IN_PROGRESS 2 0 0 3 FB1_7 (b) (b) D<4> 1 0 0 4 FB1_8 21 I/O O IDE_CS<0> 1 0 0 4 FB1_9 22 I/O O IDE_ENABLE 3 0 0 2 FB1_10 31 I/O (b) IDE_A<0> 1 0 0 4 FB1_11 24 I/O O IDE_A<1> 1 0 0 4 FB1_12 26 I/O O (unused) 0 0 0 5 FB1_13 (b) IDE_R 2 0 0 3 FB1_14 27 I/O O IDE_W 2 0 \/1 2 FB1_15 28 I/O O ROM_OE 2 1<- \/4 0 FB1_16 35 I/O O (unused) 0 0 \/5 0 FB1_17 30 GCK/I/O (b) D<12>_BUFR 19 14<- 0 0 FB1_18 (b) (b) Signals Used by Logic in Function Block 1: AS 9: A<1> 17: A<10> 2: AUTOBOOT_OFF 10: A<2> 18: A<11> 3: AUTOCONFIG_IN_PROGRESS 11: A<3> 19: IDE_ENABLE 4: AUTO_CONFIG_DONE<0> 12: A<4> 20: RESET 5: AUTO_CONFIG_DONE<1> 13: A<5> 21: RW 6: AUTO_CONFIG_DONE<2> 14: A<6> 22: autoconfig 7: A<12> 15: D<12> 23: ide 8: A<13> 16: A<9> 24: ide/ide_CLKF Signal 1 2 3 4 FB Name 0----+----0----+----0----+----0----+----0 Inputs IDE_CS<1> .......X................................ 1 D<7> ..X.................X................... 2 D<1> ..X.................X................... 2 IDE_A<2> .................X...................... 1 D<8> ..X.................X................... 2 D<5> ..X.................X................... 2 AUTOCONFIG_IN_PROGRESS X....................X.X................ 3 D<4> ..X.................X................... 2 IDE_CS<0> ......X................................. 1 IDE_ENABLE X.................XXX.XX................ 6 IDE_A<0> ...............X........................ 1 IDE_A<1> ................X....................... 1 IDE_R X.................XXX.XX................ 6 IDE_W X..................XX.XX................ 5 ROM_OE X.................XXX.XX................ 6 D<12>_BUFR XX.XXX..XXXXXXX....XXX.X................ 16 0----+----1----+----2----+----3----+----4 0 0 0 0 *********************************** FB2 *********************************** Number of function block inputs used/remaining: 24/30 Number of signals used by logic mapping into function block: 24 Signal Total Imp Exp Unused Loc Pin Pin Pin Name Pt Pt Pt Pt # Type Use D<14>_BUFR 18 13<- 0 0 FB2_1 142 I/O (b) (unused) 0 0 /\5 0 FB2_2 143 GSR/I/O GSR/I (unused) 0 0 /\3 2 FB2_3 (b) (b) (unused) 0 0 0 5 FB2_4 4 I/O D<0> 1 0 0 4 FB2_5 2 GTS/I/O O (unused) 0 0 0 5 FB2_6 3 GTS/I/O (unused) 0 0 0 5 FB2_7 (b) AUTO_CONFIG_DONE<2> 2 0 0 3 FB2_8 5 GTS/I/O (b) AUTO_CONFIG_DONE<0> 2 0 0 3 FB2_9 6 GTS/I/O (b) AUTO_CONFIG_DONE_CYCLE<2> 3 0 0 2 FB2_10 7 I/O (b) AUTO_CONFIG_DONE_CYCLE<0> 3 0 \/1 1 FB2_11 9 I/O (b) IDE_BASEADR<7> 4 1<- \/2 0 FB2_12 10 I/O (b) IDE_BASEADR<6> 4 2<- \/3 0 FB2_13 12 I/O (b) (unused) 0 0 \/5 0 FB2_14 11 I/O (b) D<13>_BUFR 17 12<- 0 0 FB2_15 13 I/O (b) D<6> 1 0 /\4 0 FB2_16 14 I/O O D<3> 1 0 0 4 FB2_17 15 I/O O (unused) 0 0 \/5 0 FB2_18 (b) (b) Signals Used by Logic in Function Block 1: AS 9: A<2> 17: IDE_BASEADR<7> 2: AUTOCONFIG_IN_PROGRESS 10: A<3> 18: D<14>.PIN 3: AUTO_CONFIG_DONE<0> 11: A<4> 19: D<15>.PIN 4: AUTO_CONFIG_DONE<1> 12: A<5> 20: RESET 5: AUTO_CONFIG_DONE<2> 13: A<6> 21: RW 6: AUTO_CONFIG_DONE_CYCLE<0> 14: D<13> 22: UDS 7: AUTO_CONFIG_DONE_CYCLE<2> 15: D<14> 23: autoconfig 8: A<1> 16: IDE_BASEADR<6> 24: ide/ide_CLKF Signal 1 2 3 4 FB Name 0----+----0----+----0----+----0----+----0 Inputs D<14>_BUFR X.XXX..XXXXXX.X....XX.XX................ 15 D<0> .X..................X................... 2 AUTO_CONFIG_DONE<2> X.....X................................. 2 AUTO_CONFIG_DONE<0> X....X.................................. 2 AUTO_CONFIG_DONE_CYCLE<2> X.XXX.XX.XXXX......XXXXX................ 15 AUTO_CONFIG_DONE_CYCLE<0> X.X..X.X.XXXX......XXXXX................ 13 IDE_BASEADR<7> X.XX...XXXXXX...X.XXXXXX................ 16 IDE_BASEADR<6> X.XX...XXXXXX..X.X.XXXXX................ 16 D<13>_BUFR X.XXX..XXXXXXX.....XX.XX................ 15 D<6> .X..................X................... 2 D<3> .X..................X................... 2 0----+----1----+----2----+----3----+----4 0 0 0 0 *********************************** FB3 *********************************** Number of function block inputs used/remaining: 24/30 Number of signals used by logic mapping into function block: 24 Signal Total Imp Exp Unused Loc Pin Pin Pin Name Pt Pt Pt Pt # Type Use D<2> 1 0 0 4 FB3_1 39 I/O O (unused) 0 0 0 5 FB3_2 32 GCK/I/O D<10> 1 0 0 4 FB3_3 41 I/O I/O D<12> 2 0 0 3 FB3_4 44 I/O I/O (unused) 0 0 0 5 FB3_5 33 I/O (unused) 0 0 0 5 FB3_6 34 I/O D<14> 2 0 0 3 FB3_7 46 I/O I/O (unused) 0 0 0 5 FB3_8 38 GCK/I/O D<9> 1 0 0 4 FB3_9 40 I/O I/O D<15> 2 0 0 3 FB3_10 48 I/O I/O D<11> 1 0 0 4 FB3_11 43 I/O I/O D<13> 2 0 0 3 FB3_12 45 I/O I/O (unused) 0 0 0 5 FB3_13 (b) (unused) 0 0 0 5 FB3_14 49 I/O I AUTO_CONFIG_DONE<1> 2 0 0 3 FB3_15 50 I/O I AUTO_CONFIG_DONE_CYCLE<1> 3 0 0 2 FB3_16 (b) (b) IDE_BASEADR<3> 4 0 0 1 FB3_17 51 I/O I IDE_BASEADR<2> 4 0 0 1 FB3_18 (b) (b) Signals Used by Logic in Function Block 1: AS 9: A<4> 17: IDE_BASEADR<3> 2: AUTOCONFIG_IN_PROGRESS 10: A<5> 18: D<11>.PIN 3: AUTO_CONFIG_DONE<0> 11: A<6> 19: D<10>.PIN 4: AUTO_CONFIG_DONE<1> 12: D<12>_BUFR 20: RESET 5: AUTO_CONFIG_DONE_CYCLE<1> 13: D<13>_BUFR 21: RW 6: A<1> 14: D<14>_BUFR 22: UDS 7: A<2> 15: D<15>_BUFR 23: autoconfig 8: A<3> 16: IDE_BASEADR<2> 24: ide/ide_CLKF Signal 1 2 3 4 FB Name 0----+----0----+----0----+----0----+----0 Inputs D<2> .X..................X................... 2 D<10> .X..................X................... 2 D<12> .X.........X........X................... 3 D<14> .X...........X......X................... 3 D<9> .X..................X................... 2 D<15> .X............X.....X................... 3 D<11> .X..................X................... 2 D<13> .X..........X.......X................... 3 AUTO_CONFIG_DONE<1> X...X................................... 2 AUTO_CONFIG_DONE_CYCLE<1> X.XXXX.XXXX........XXXXX................ 14 IDE_BASEADR<3> X.XX.XXXXXX.....XX.XXXXX................ 16 IDE_BASEADR<2> X.XX.XXXXXX....X..XXXXXX................ 16 0----+----1----+----2----+----3----+----4 0 0 0 0 *********************************** FB4 *********************************** Number of function block inputs used/remaining: 24/30 Number of signals used by logic mapping into function block: 24 Signal Total Imp Exp Unused Loc Pin Pin Pin Name Pt Pt Pt Pt # Type Use ide 19 14<- 0 0 FB4_1 118 I/O (b) (unused) 0 0 /\5 0 FB4_2 126 I/O (b) (unused) 0 0 /\3 2 FB4_3 133 I/O (b) (unused) 0 0 0 5 FB4_4 (b) (unused) 0 0 0 5 FB4_5 128 I/O (unused) 0 0 0 5 FB4_6 129 I/O (unused) 0 0 0 5 FB4_7 (b) (unused) 0 0 0 5 FB4_8 130 I/O (unused) 0 0 0 5 FB4_9 131 I/O (unused) 0 0 0 5 FB4_10 135 I/O (unused) 0 0 0 5 FB4_11 132 I/O (unused) 0 0 0 5 FB4_12 134 I/O (unused) 0 0 0 5 FB4_13 137 I/O (unused) 0 0 0 5 FB4_14 136 I/O (unused) 0 0 0 5 FB4_15 138 I/O ide/ide_CLKF 2 0 0 3 FB4_16 139 I/O (b) autoconfig 4 0 \/1 0 FB4_17 140 I/O (b) (unused) 0 0 \/5 0 FB4_18 (b) (b) Signals Used by Logic in Function Block 1: AUTO_CONFIG_DONE<0> 9: A<21> 17: IDE_BASEADR<2> 2: AUTO_CONFIG_DONE<1> 10: A<22> 18: IDE_BASEADR<3> 3: AUTO_CONFIG_DONE<2> 11: A<23> 19: IDE_BASEADR<4> 4: A<16> 12: BERR 20: IDE_BASEADR<5> 5: A<17> 13: C1 21: IDE_BASEADR<6> 6: A<18> 14: C3 22: IDE_BASEADR<7> 7: A<19> 15: IDE_BASEADR<0> 23: SHUT_UP<1> 8: A<20> 16: IDE_BASEADR<1> 24: ide/ide_CLKF Signal 1 2 3 4 FB Name 0----+----0----+----0----+----0----+----0 Inputs ide ...XXXXXXXXX..XXXXXXXXXX................ 19 ide/ide_CLKF ............XX.......................... 2 autoconfig XXXXXXXXXXXX...........X................ 13 0----+----1----+----2----+----3----+----4 0 0 0 0 *********************************** FB5 *********************************** Number of function block inputs used/remaining: 23/31 Number of signals used by logic mapping into function block: 23 Signal Total Imp Exp Unused Loc Pin Pin Pin Name Pt Pt Pt Pt # Type Use (unused) 0 0 0 5 FB5_1 (b) (unused) 0 0 0 5 FB5_2 52 I/O I (unused) 0 0 0 5 FB5_3 59 I/O I (unused) 0 0 0 5 FB5_4 (b) (unused) 0 0 0 5 FB5_5 53 I/O (unused) 0 0 0 5 FB5_6 54 I/O I (unused) 0 0 0 5 FB5_7 66 I/O (unused) 0 0 0 5 FB5_8 56 I/O (unused) 0 0 0 5 FB5_9 57 I/O I ROM_B<0> 0 0 0 5 FB5_10 68 I/O O (unused) 0 0 0 5 FB5_11 58 I/O I (unused) 0 0 0 5 FB5_12 60 I/O I SHUT_UP<1> 3 0 0 2 FB5_13 70 I/O (b) IDE_BASEADR<5> 4 0 0 1 FB5_14 61 I/O I IDE_BASEADR<4> 4 0 0 1 FB5_15 64 I/O I IDE_BASEADR<1> 4 0 0 1 FB5_16 (b) (b) ROM_B<1> 0 0 0 5 FB5_17 69 I/O O IDE_BASEADR<0> 4 0 0 1 FB5_18 (b) (b) Signals Used by Logic in Function Block 1: AS 9: A<6> 17: D<9>.PIN 2: AUTO_CONFIG_DONE<0> 10: IDE_BASEADR<0> 18: RESET 3: AUTO_CONFIG_DONE<1> 11: IDE_BASEADR<1> 19: RW 4: A<1> 12: IDE_BASEADR<4> 20: SHUT_UP<1> 5: A<2> 13: IDE_BASEADR<5> 21: UDS 6: A<3> 14: D<12>.PIN 22: autoconfig 7: A<4> 15: D<13>.PIN 23: ide/ide_CLKF 8: A<5> 16: D<8>.PIN Signal 1 2 3 4 FB Name 0----+----0----+----0----+----0----+----0 Inputs ROM_B<0> ........................................ 0 SHUT_UP<1> XXXXXXXXX........XXXXXX................. 15 IDE_BASEADR<5> XXXXXXXXX...X.X..XX.XXX................. 16 IDE_BASEADR<4> XXXXXXXXX..X.X...XX.XXX................. 16 IDE_BASEADR<1> XXXXXXXXX.X.....XXX.XXX................. 16 ROM_B<1> ........................................ 0 IDE_BASEADR<0> XXXXXXXXXX.....X.XX.XXX................. 16 0----+----1----+----2----+----3----+----4 0 0 0 0 *********************************** FB6 *********************************** Number of function block inputs used/remaining: 15/39 Number of signals used by logic mapping into function block: 15 Signal Total Imp Exp Unused Loc Pin Pin Pin Name Pt Pt Pt Pt # Type Use (unused) 0 0 0 5 FB6_1 (b) (unused) 0 0 0 5 FB6_2 106 I/O (unused) 0 0 0 5 FB6_3 (b) (unused) 0 0 0 5 FB6_4 111 I/O (unused) 0 0 0 5 FB6_5 110 I/O (unused) 0 0 0 5 FB6_6 112 I/O (unused) 0 0 0 5 FB6_7 (b) (unused) 0 0 0 5 FB6_8 113 I/O (unused) 0 0 0 5 FB6_9 116 I/O (unused) 0 0 0 5 FB6_10 115 I/O (unused) 0 0 0 5 FB6_11 119 I/O (unused) 0 0 0 5 FB6_12 120 I/O (unused) 0 0 0 5 FB6_13 (b) (unused) 0 0 0 5 FB6_14 121 I/O (unused) 0 0 0 5 FB6_15 124 I/O (unused) 0 0 \/4 1 FB6_16 117 I/O (b) D<15>_BUFR 14 9<- 0 0 FB6_17 125 I/O (b) (unused) 0 0 /\5 0 FB6_18 (b) (b) Signals Used by Logic in Function Block 1: AS 6: A<2> 11: D<15> 2: AUTO_CONFIG_DONE<0> 7: A<3> 12: RESET 3: AUTO_CONFIG_DONE<1> 8: A<4> 13: RW 4: AUTO_CONFIG_DONE<2> 9: A<5> 14: autoconfig 5: A<1> 10: A<6> 15: ide/ide_CLKF Signal 1 2 3 4 FB Name 0----+----0----+----0----+----0----+----0 Inputs D<15>_BUFR XXXXXXXXXXXXXXX......................... 15 0----+----1----+----2----+----3----+----4 0 0 0 0 *********************************** FB7 *********************************** Number of function block inputs used/remaining: 0/54 Number of signals used by logic mapping into function block: 0 Signal Total Imp Exp Unused Loc Pin Pin Pin Name Pt Pt Pt Pt # Type Use (unused) 0 0 0 5 FB7_1 (b) (unused) 0 0 0 5 FB7_2 71 I/O (unused) 0 0 0 5 FB7_3 75 I/O I (unused) 0 0 0 5 FB7_4 (b) (unused) 0 0 0 5 FB7_5 74 I/O (unused) 0 0 0 5 FB7_6 76 I/O (unused) 0 0 0 5 FB7_7 77 I/O (unused) 0 0 0 5 FB7_8 78 I/O (unused) 0 0 0 5 FB7_9 80 I/O I (unused) 0 0 0 5 FB7_10 79 I/O (unused) 0 0 0 5 FB7_11 82 I/O DTACK 0 0 0 5 FB7_12 85 I/O O (unused) 0 0 0 5 FB7_13 81 I/O I (unused) 0 0 0 5 FB7_14 86 I/O I (unused) 0 0 0 5 FB7_15 87 I/O I (unused) 0 0 0 5 FB7_16 83 I/O I (unused) 0 0 0 5 FB7_17 88 I/O I (unused) 0 0 0 5 FB7_18 (b) Signals Used by Logic in Function Block Signal 1 2 3 4 FB Name 0----+----0----+----0----+----0----+----0 Inputs DTACK ........................................ 0 0----+----1----+----2----+----3----+----4 0 0 0 0 *********************************** FB8 *********************************** Number of function block inputs used/remaining: 0/54 Number of signals used by logic mapping into function block: 0 Signal Total Imp Exp Unused Loc Pin Pin Pin Name Pt Pt Pt Pt # Type Use (unused) 0 0 0 5 FB8_1 (b) (unused) 0 0 0 5 FB8_2 91 I/O I (unused) 0 0 0 5 FB8_3 95 I/O I (unused) 0 0 0 5 FB8_4 97 I/O I (unused) 0 0 0 5 FB8_5 92 I/O I (unused) 0 0 0 5 FB8_6 93 I/O (unused) 0 0 0 5 FB8_7 (b) (unused) 0 0 0 5 FB8_8 94 I/O I (unused) 0 0 0 5 FB8_9 96 I/O (unused) 0 0 0 5 FB8_10 101 I/O (unused) 0 0 0 5 FB8_11 98 I/O I (unused) 0 0 0 5 FB8_12 100 I/O (unused) 0 0 0 5 FB8_13 103 I/O I (unused) 0 0 0 5 FB8_14 102 I/O I (unused) 0 0 0 5 FB8_15 104 I/O (unused) 0 0 0 5 FB8_16 107 I/O (unused) 0 0 0 5 FB8_17 105 I/O (unused) 0 0 0 5 FB8_18 (b) ******************************* Equations ******************************** ********** Mapped Logic ********** FDCPE_AUTOCONFIG_IN_PROGRESS: FDCPE port map (AUTOCONFIG_IN_PROGRESS,AUTOCONFIG_IN_PROGRESS_D,ide/ide_CLKF,'0','0'); AUTOCONFIG_IN_PROGRESS_D <= (NOT AS AND autoconfig); FDCPE_AUTO_CONFIG_DONE0: FDCPE port map (AUTO_CONFIG_DONE(0),AUTO_CONFIG_DONE_CYCLE(0),AS,NOT RESET,'0'); FDCPE_AUTO_CONFIG_DONE1: FDCPE port map (AUTO_CONFIG_DONE(1),AUTO_CONFIG_DONE_CYCLE(1),AS,NOT RESET,'0'); FDCPE_AUTO_CONFIG_DONE2: FDCPE port map (AUTO_CONFIG_DONE(2),AUTO_CONFIG_DONE_CYCLE(2),AS,NOT RESET,'0'); FDCPE_AUTO_CONFIG_DONE_CYCLE0: FDCPE port map (AUTO_CONFIG_DONE_CYCLE(0),AUTO_CONFIG_DONE_CYCLE_D(0),ide/ide_CLKF,'0','0'); AUTO_CONFIG_DONE_CYCLE_D(0) <= ((RESET AND AUTO_CONFIG_DONE_CYCLE(0)) OR (RESET AND NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(1) AND A(6) AND A(3) AND NOT AUTO_CONFIG_DONE(0) AND autoconfig)); FDCPE_AUTO_CONFIG_DONE_CYCLE1: FDCPE port map (AUTO_CONFIG_DONE_CYCLE(1),AUTO_CONFIG_DONE_CYCLE_D(1),ide/ide_CLKF,'0','0'); AUTO_CONFIG_DONE_CYCLE_D(1) <= ((RESET AND AUTO_CONFIG_DONE_CYCLE(1)) OR (RESET AND NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(1) AND A(6) AND A(3) AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND autoconfig)); FDCPE_AUTO_CONFIG_DONE_CYCLE2: FDCPE port map (AUTO_CONFIG_DONE_CYCLE(2),AUTO_CONFIG_DONE_CYCLE_D(2),ide/ide_CLKF,'0','0'); AUTO_CONFIG_DONE_CYCLE_D(2) <= ((RESET AND AUTO_CONFIG_DONE_CYCLE(2)) OR (RESET AND NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(1) AND A(6) AND A(3) AND AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND NOT AUTO_CONFIG_DONE(2) AND autoconfig)); D_I(0) <= '1'; D(0) <= D_I(0) when D_OE(0) = '1' else 'Z'; D_OE(0) <= (RW AND AUTOCONFIG_IN_PROGRESS); D_I(1) <= '1'; D(1) <= D_I(1) when D_OE(1) = '1' else 'Z'; D_OE(1) <= (RW AND AUTOCONFIG_IN_PROGRESS); D_I(2) <= '1'; D(2) <= D_I(2) when D_OE(2) = '1' else 'Z'; D_OE(2) <= (RW AND AUTOCONFIG_IN_PROGRESS); D_I(3) <= '1'; D(3) <= D_I(3) when D_OE(3) = '1' else 'Z'; D_OE(3) <= (RW AND AUTOCONFIG_IN_PROGRESS); D_I(4) <= '1'; D(4) <= D_I(4) when D_OE(4) = '1' else 'Z'; D_OE(4) <= (RW AND AUTOCONFIG_IN_PROGRESS); D_I(5) <= '1'; D(5) <= D_I(5) when D_OE(5) = '1' else 'Z'; D_OE(5) <= (RW AND AUTOCONFIG_IN_PROGRESS); D_I(6) <= '1'; D(6) <= D_I(6) when D_OE(6) = '1' else 'Z'; D_OE(6) <= (RW AND AUTOCONFIG_IN_PROGRESS); D_I(7) <= '1'; D(7) <= D_I(7) when D_OE(7) = '1' else 'Z'; D_OE(7) <= (RW AND AUTOCONFIG_IN_PROGRESS); D_I(8) <= '1'; D(8) <= D_I(8) when D_OE(8) = '1' else 'Z'; D_OE(8) <= (RW AND AUTOCONFIG_IN_PROGRESS); D_I(9) <= '1'; D(9) <= D_I(9) when D_OE(9) = '1' else 'Z'; D_OE(9) <= (RW AND AUTOCONFIG_IN_PROGRESS); D_I(10) <= '1'; D(10) <= D_I(10) when D_OE(10) = '1' else 'Z'; D_OE(10) <= (RW AND AUTOCONFIG_IN_PROGRESS); D_I(11) <= '1'; D(11) <= D_I(11) when D_OE(11) = '1' else 'Z'; D_OE(11) <= (RW AND AUTOCONFIG_IN_PROGRESS); FDCPE_D12_BUFR: FDCPE port map (D(12)_BUFR,D_D(12)_BUFR,ide/ide_CLKF,'0','0'); D_D(12)_BUFR <= ((RESET AND RW AND NOT AS AND NOT A(5) AND NOT A(4) AND A(6) AND NOT A(3) AND NOT A(2) AND NOT AUTO_CONFIG_DONE(0) AND autoconfig) OR (RESET AND RW AND NOT AS AND NOT A(5) AND NOT A(4) AND A(6) AND NOT A(3) AND NOT A(2) AND NOT AUTO_CONFIG_DONE(1) AND autoconfig) OR (RESET AND RW AND NOT AS AND NOT A(5) AND NOT A(4) AND A(6) AND NOT A(3) AND NOT A(2) AND NOT AUTO_CONFIG_DONE(2) AND autoconfig) OR (RESET AND RW AND NOT AS AND NOT A(5) AND NOT A(1) AND NOT A(6) AND NOT A(3) AND A(2) AND NOT AUTO_CONFIG_DONE(0) AND autoconfig) OR (RESET AND RW AND NOT AS AND A(5) AND NOT A(4) AND A(1) AND NOT A(6) AND A(2) AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND autoconfig) OR (ROM_OE_S.EXP) OR (RESET AND NOT D(12) AND NOT RW) OR (RESET AND NOT D(12) AND AS) OR (RESET AND NOT D(12) AND NOT autoconfig) OR (RESET AND NOT D(12) AND AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND AUTO_CONFIG_DONE(2)) OR (RESET AND RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(1) AND NOT A(3) AND NOT A(2) AND NOT AUTO_CONFIG_DONE(0) AND autoconfig) OR (RESET AND RW AND NOT AS AND NOT A(4) AND A(1) AND NOT A(6) AND NOT A(3) AND A(2) AND NOT AUTO_CONFIG_DONE(0) AND autoconfig) OR (RESET AND RW AND NOT AS AND NOT A(5) AND A(4) AND NOT A(6) AND A(3) AND NOT A(2) AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND autoconfig) OR (RESET AND RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(1) AND NOT A(3) AND NOT A(2) AND AUTO_CONFIG_DONE(1) AND NOT AUTO_CONFIG_DONE(2) AND autoconfig) OR (RESET AND RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(1) AND NOT A(3) AND NOT A(2) AND NOT AUTO_CONFIG_DONE(1) AND AUTOBOOT_OFF AND autoconfig)); D_I(12) <= D(12)_BUFR; D(12) <= D_I(12) when D_OE(12) = '1' else 'Z'; D_OE(12) <= (RW AND AUTOCONFIG_IN_PROGRESS); FDCPE_D13_BUFR: FDCPE port map (D(13)_BUFR,D_D(13)_BUFR,ide/ide_CLKF,'0','0'); D_D(13)_BUFR <= ((IDE_BASEADR(6).EXP) OR (RESET AND NOT D(13) AND NOT RW) OR (RESET AND NOT D(13) AND AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND AUTO_CONFIG_DONE(2)) OR (RESET AND RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(6) AND NOT A(3) AND NOT AUTO_CONFIG_DONE(0) AND autoconfig) OR (RESET AND RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(3) AND NOT A(2) AND NOT AUTO_CONFIG_DONE(0) AND autoconfig) OR (RESET AND RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(3) AND NOT A(2) AND NOT AUTO_CONFIG_DONE(1) AND autoconfig) OR (RESET AND RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(3) AND NOT A(2) AND NOT AUTO_CONFIG_DONE(2) AND autoconfig) OR (RESET AND RW AND NOT AS AND NOT A(5) AND NOT A(4) AND A(1) AND NOT A(6) AND NOT A(3) AND NOT AUTO_CONFIG_DONE(1) AND autoconfig) OR (RESET AND RW AND NOT AS AND NOT A(5) AND A(1) AND NOT A(6) AND NOT A(3) AND NOT A(2) AND NOT AUTO_CONFIG_DONE(0) AND autoconfig) OR (RESET AND RW AND NOT AS AND NOT A(5) AND A(4) AND NOT A(1) AND NOT A(6) AND A(2) AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND autoconfig) OR (RESET AND NOT D(13) AND AS) OR (RESET AND NOT D(13) AND NOT autoconfig) OR (RESET AND RW AND NOT AS AND NOT A(5) AND A(4) AND NOT A(6) AND A(3) AND A(2) AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND autoconfig) OR (RESET AND RW AND NOT AS AND NOT A(5) AND A(1) AND NOT A(6) AND NOT A(3) AND NOT A(2) AND AUTO_CONFIG_DONE(1) AND NOT AUTO_CONFIG_DONE(2) AND autoconfig)); D_I(13) <= D(13)_BUFR; D(13) <= D_I(13) when D_OE(13) = '1' else 'Z'; D_OE(13) <= (RW AND AUTOCONFIG_IN_PROGRESS); D_I(14) <= D(14)_BUFR; D(14) <= D_I(14) when D_OE(14) = '1' else 'Z'; D_OE(14) <= (RW AND AUTOCONFIG_IN_PROGRESS); FDCPE_D14_BUFR: FDCPE port map (D(14)_BUFR,D_D(14)_BUFR,ide/ide_CLKF,'0','0'); D_D(14)_BUFR <= ((EXP16_.EXP) OR (RESET AND RW AND NOT AS AND NOT A(5) AND NOT A(4) AND A(1) AND NOT A(3) AND NOT A(2) AND NOT AUTO_CONFIG_DONE(0) AND autoconfig) OR (RESET AND RW AND NOT AS AND NOT A(5) AND NOT A(4) AND A(6) AND NOT A(3) AND NOT A(2) AND NOT AUTO_CONFIG_DONE(0) AND autoconfig) OR (RESET AND RW AND NOT AS AND NOT A(5) AND NOT A(4) AND A(6) AND NOT A(3) AND NOT A(2) AND NOT AUTO_CONFIG_DONE(1) AND autoconfig) OR (RESET AND RW AND NOT AS AND NOT A(5) AND NOT A(4) AND A(6) AND NOT A(3) AND NOT A(2) AND NOT AUTO_CONFIG_DONE(2) AND autoconfig) OR (RESET AND RW AND NOT AS AND NOT A(4) AND A(1) AND NOT A(6) AND NOT A(3) AND A(2) AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND autoconfig) OR (RESET AND NOT D(14) AND NOT RW) OR (RESET AND NOT D(14) AND AS) OR (RESET AND NOT D(14) AND NOT autoconfig) OR (RESET AND NOT D(14) AND AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND AUTO_CONFIG_DONE(2)) OR (RESET AND RW AND NOT AS AND NOT A(5) AND A(1) AND NOT A(6) AND NOT A(3) AND A(2) AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(2) AND autoconfig) OR (RESET AND RW AND NOT AS AND NOT A(5) AND NOT A(4) AND A(1) AND NOT A(3) AND NOT A(2) AND NOT AUTO_CONFIG_DONE(1) AND autoconfig) OR (RESET AND RW AND NOT AS AND NOT A(5) AND NOT A(4) AND A(1) AND NOT A(3) AND NOT A(2) AND NOT AUTO_CONFIG_DONE(2) AND autoconfig) OR (RESET AND RW AND NOT AS AND NOT A(5) AND A(1) AND NOT A(6) AND NOT A(3) AND A(2) AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND autoconfig) OR (RESET AND RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(6) AND NOT A(3) AND A(2) AND AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND NOT AUTO_CONFIG_DONE(2) AND autoconfig)); D_I(15) <= D(15)_BUFR; D(15) <= D_I(15) when D_OE(15) = '1' else 'Z'; D_OE(15) <= (RW AND AUTOCONFIG_IN_PROGRESS); FDCPE_D15_BUFR: FDCPE port map (D(15)_BUFR,D_D(15)_BUFR,ide/ide_CLKF,'0','0'); D_D(15)_BUFR <= ((RESET AND NOT D(15) AND AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND AUTO_CONFIG_DONE(2)) OR (RESET AND RW AND NOT AS AND NOT A(5) AND A(1) AND NOT A(6) AND NOT A(3) AND NOT AUTO_CONFIG_DONE(0) AND autoconfig) OR (RESET AND RW AND NOT AS AND NOT A(5) AND NOT A(4) AND A(6) AND NOT A(3) AND NOT A(2) AND NOT AUTO_CONFIG_DONE(0) AND autoconfig) OR (RESET AND RW AND NOT AS AND NOT A(5) AND NOT A(4) AND A(6) AND NOT A(3) AND NOT A(2) AND NOT AUTO_CONFIG_DONE(1) AND autoconfig) OR (RESET AND RW AND NOT AS AND NOT A(5) AND NOT A(4) AND A(6) AND NOT A(3) AND NOT A(2) AND NOT AUTO_CONFIG_DONE(2) AND autoconfig) OR (RESET AND RW AND NOT AS AND NOT A(5) AND A(1) AND NOT A(6) AND NOT A(3) AND AUTO_CONFIG_DONE(1) AND NOT AUTO_CONFIG_DONE(2) AND autoconfig) OR (RESET AND RW AND NOT AS AND NOT A(5) AND A(4) AND A(1) AND NOT A(6) AND A(2) AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND autoconfig) OR (RESET AND RW AND NOT AS AND A(5) AND NOT A(4) AND NOT A(1) AND NOT A(6) AND NOT A(3) AND A(2) AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND autoconfig) OR (RESET AND RW AND NOT AS AND NOT A(5) AND A(4) AND NOT A(1) AND NOT A(6) AND A(3) AND NOT A(2) AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND autoconfig) OR (RESET AND NOT D(15) AND NOT RW) OR (RESET AND NOT D(15) AND AS) OR (RESET AND NOT D(15) AND NOT autoconfig) OR (RESET AND RW AND NOT AS AND NOT A(5) AND A(1) AND NOT A(6) AND NOT A(3) AND NOT A(2) AND NOT AUTO_CONFIG_DONE(1) AND autoconfig)); DTACK_I <= '0'; DTACK <= DTACK_I when DTACK_OE = '1' else 'Z'; DTACK_OE <= '0'; IDE_A(0) <= A(9); IDE_A(1) <= A(10); IDE_A(2) <= A(11); FTCPE_IDE_BASEADR0: FTCPE port map (IDE_BASEADR(0),IDE_BASEADR_T(0),ide/ide_CLKF,'0','0'); IDE_BASEADR_T(0) <= ((NOT RESET AND NOT IDE_BASEADR(0)) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(1) AND A(6) AND A(3) AND NOT A(2) AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND NOT IDE_BASEADR(0) AND autoconfig AND D(8).PIN) OR (RESET AND NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(1) AND A(6) AND A(3) AND NOT A(2) AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND IDE_BASEADR(0) AND autoconfig AND NOT D(8).PIN)); FTCPE_IDE_BASEADR1: FTCPE port map (IDE_BASEADR(1),IDE_BASEADR_T(1),ide/ide_CLKF,'0','0'); IDE_BASEADR_T(1) <= ((NOT RESET AND NOT IDE_BASEADR(1)) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(1) AND A(6) AND A(3) AND NOT A(2) AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND NOT IDE_BASEADR(1) AND autoconfig AND D(9).PIN) OR (RESET AND NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(1) AND A(6) AND A(3) AND NOT A(2) AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND IDE_BASEADR(1) AND autoconfig AND NOT D(9).PIN)); FTCPE_IDE_BASEADR2: FTCPE port map (IDE_BASEADR(2),IDE_BASEADR_T(2),ide/ide_CLKF,'0','0'); IDE_BASEADR_T(2) <= ((NOT RESET AND NOT IDE_BASEADR(2)) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(1) AND A(6) AND A(3) AND NOT A(2) AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND NOT IDE_BASEADR(2) AND autoconfig AND D(10).PIN) OR (RESET AND NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(1) AND A(6) AND A(3) AND NOT A(2) AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND IDE_BASEADR(2) AND autoconfig AND NOT D(10).PIN)); FTCPE_IDE_BASEADR3: FTCPE port map (IDE_BASEADR(3),IDE_BASEADR_T(3),ide/ide_CLKF,'0','0'); IDE_BASEADR_T(3) <= ((NOT RESET AND NOT IDE_BASEADR(3)) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(1) AND A(6) AND A(3) AND NOT A(2) AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND NOT IDE_BASEADR(3) AND autoconfig AND D(11).PIN) OR (RESET AND NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(1) AND A(6) AND A(3) AND NOT A(2) AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND IDE_BASEADR(3) AND autoconfig AND NOT D(11).PIN)); FTCPE_IDE_BASEADR4: FTCPE port map (IDE_BASEADR(4),IDE_BASEADR_T(4),ide/ide_CLKF,'0','0'); IDE_BASEADR_T(4) <= ((NOT RESET AND NOT IDE_BASEADR(4)) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(1) AND A(6) AND A(3) AND NOT A(2) AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND NOT IDE_BASEADR(4) AND autoconfig AND D(12).PIN) OR (RESET AND NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(1) AND A(6) AND A(3) AND NOT A(2) AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND IDE_BASEADR(4) AND autoconfig AND NOT D(12).PIN)); FTCPE_IDE_BASEADR5: FTCPE port map (IDE_BASEADR(5),IDE_BASEADR_T(5),ide/ide_CLKF,'0','0'); IDE_BASEADR_T(5) <= ((NOT RESET AND NOT IDE_BASEADR(5)) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(1) AND A(6) AND A(3) AND NOT A(2) AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND NOT IDE_BASEADR(5) AND autoconfig AND D(13).PIN) OR (RESET AND NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(1) AND A(6) AND A(3) AND NOT A(2) AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND IDE_BASEADR(5) AND autoconfig AND NOT D(13).PIN)); FTCPE_IDE_BASEADR6: FTCPE port map (IDE_BASEADR(6),IDE_BASEADR_T(6),ide/ide_CLKF,'0','0'); IDE_BASEADR_T(6) <= ((NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(1) AND A(6) AND A(3) AND NOT A(2) AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND NOT IDE_BASEADR(6) AND autoconfig AND D(14).PIN) OR (RESET AND NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(1) AND A(6) AND A(3) AND NOT A(2) AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND IDE_BASEADR(6) AND autoconfig AND NOT D(14).PIN) OR (NOT RESET AND NOT IDE_BASEADR(6))); FTCPE_IDE_BASEADR7: FTCPE port map (IDE_BASEADR(7),IDE_BASEADR_T(7),ide/ide_CLKF,'0','0'); IDE_BASEADR_T(7) <= ((RESET AND NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(1) AND A(6) AND A(3) AND NOT A(2) AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND IDE_BASEADR(7) AND autoconfig AND NOT D(15).PIN) OR (NOT RESET AND NOT IDE_BASEADR(7)) OR (NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(1) AND A(6) AND A(3) AND NOT A(2) AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND NOT IDE_BASEADR(7) AND autoconfig AND D(15).PIN)); IDE_CS(0) <= NOT A(12); IDE_CS(1) <= NOT A(13); FDCPE_IDE_ENABLE: FDCPE port map (IDE_ENABLE,IDE_ENABLE_D,ide/ide_CLKF,'0','0'); IDE_ENABLE_D <= ((RESET AND NOT IDE_ENABLE) OR (RESET AND NOT RW AND NOT AS AND ide)); FDCPE_IDE_R: FDCPE port map (IDE_R,IDE_R_D,ide/ide_CLKF,'0','0'); IDE_R_D <= (RESET AND RW AND NOT AS AND NOT IDE_ENABLE AND ide); FDCPE_IDE_W: FDCPE port map (IDE_W,IDE_W_D,ide/ide_CLKF,'0','0'); IDE_W_D <= (RESET AND NOT RW AND NOT AS AND ide); ROM_B(0) <= '0'; ROM_B(1) <= '0'; FDCPE_ROM_OE: FDCPE port map (ROM_OE,ROM_OE_D,ide/ide_CLKF,'0','0'); ROM_OE_D <= (RESET AND RW AND NOT AS AND IDE_ENABLE AND ide); FDCPE_SHUT_UP1: FDCPE port map (SHUT_UP(1),SHUT_UP_D(1),ide/ide_CLKF,'0','0'); SHUT_UP_D(1) <= ((RESET AND NOT SHUT_UP(1)) OR (RESET AND NOT UDS AND NOT RW AND NOT AS AND NOT A(5) AND NOT A(4) AND NOT A(1) AND A(6) AND A(3) AND NOT A(2) AND AUTO_CONFIG_DONE(0) AND NOT AUTO_CONFIG_DONE(1) AND autoconfig)); FDCPE_autoconfig: FDCPE port map (autoconfig,autoconfig_D,ide/ide_CLKF,'0','0'); autoconfig_D <= ((A(23) AND A(22) AND A(21) AND A(19) AND NOT AUTO_CONFIG_DONE(0) AND BERR AND NOT A(17) AND NOT A(16) AND NOT A(20) AND NOT A(18)) OR (A(23) AND A(22) AND A(21) AND A(19) AND NOT AUTO_CONFIG_DONE(1) AND BERR AND NOT A(17) AND NOT A(16) AND NOT A(20) AND NOT A(18)) OR (A(23) AND A(22) AND A(21) AND A(19) AND NOT AUTO_CONFIG_DONE(2) AND BERR AND NOT A(17) AND NOT A(16) AND NOT A(20) AND NOT A(18))); FDCPE_ide: FDCPE port map (ide,ide_D,ide/ide_CLKF,'0','0'); ide_D <= ((SHUT_UP(1)) OR (NOT BERR) OR (EXP20_.EXP) OR (A(23) AND NOT IDE_BASEADR(7)) OR (NOT A(23) AND IDE_BASEADR(7)) OR (A(22) AND NOT IDE_BASEADR(6)) OR (NOT A(22) AND IDE_BASEADR(6)) OR (IDE_BASEADR(1) AND NOT A(17)) OR (autoconfig.EXP) OR (IDE_BASEADR(0) AND NOT A(16)) OR (NOT IDE_BASEADR(0) AND A(16)) OR (NOT IDE_BASEADR(1) AND A(17)) OR (IDE_BASEADR(2) AND NOT A(18)) OR (NOT IDE_BASEADR(2) AND A(18)) OR (A(19) AND NOT IDE_BASEADR(3)) OR (NOT A(19) AND IDE_BASEADR(3))); ide/ide_CLKF <= NOT (C3 XOR ide/ide_CLKF <= NOT (C1); Register Legend: FDCPE (Q,D,C,CLR,PRE,CE); FTCPE (Q,D,C,CLR,PRE,CE); LDCP (Q,D,G,CLR,PRE); ****************************** Device Pin Out ***************************** Device : XC95144XL-10-TQ144 Pin Signal Pin Signal No. Name No. Name 1 VCC 73 VCC 2 D<0> 74 KPR 3 KPR 75 AUTOBOOT_OFF 4 KPR 76 KPR 5 KPR 77 KPR 6 KPR 78 KPR 7 KPR 79 KPR 8 VCC 80 AS 9 KPR 81 UDS 10 KPR 82 KPR 11 KPR 83 RW 12 KPR 84 VCC 13 KPR 85 DTACK 14 D<6> 86 A<23> 15 D<3> 87 A<22> 16 D<7> 88 A<21> 17 D<1> 89 GND 18 GND 90 GND 19 D<8> 91 A<20> 20 D<5> 92 A<19> 21 D<4> 93 KPR 22 IDE_CS<0> 94 A<18> 23 IDE_CS<1> 95 A<17> 24 IDE_A<0> 96 KPR 25 IDE_A<2> 97 A<16> 26 IDE_A<1> 98 BERR 27 IDE_R 99 GND 28 IDE_W 100 KPR 29 GND 101 KPR 30 KPR 102 C3 31 KPR 103 C1 32 KPR 104 KPR 33 KPR 105 KPR 34 KPR 106 KPR 35 ROM_OE 107 KPR 36 GND 108 GND 37 VCC 109 VCC 38 KPR 110 KPR 39 D<2> 111 KPR 40 D<9> 112 KPR 41 D<10> 113 KPR 42 VCC 114 GND 43 D<11> 115 KPR 44 D<12> 116 KPR 45 D<13> 117 KPR 46 D<14> 118 KPR 47 GND 119 KPR 48 D<15> 120 KPR 49 A<5> 121 KPR 50 A<4> 122 TDO 51 A<6> 123 GND 52 A<3> 124 KPR 53 KPR 125 KPR 54 A<2> 126 KPR 55 VCC 127 VCC 56 KPR 128 KPR 57 A<1> 129 KPR 58 A<9> 130 KPR 59 A<10> 131 KPR 60 A<11> 132 KPR 61 A<12> 133 KPR 62 GND 134 KPR 63 TDI 135 KPR 64 A<13> 136 KPR 65 TMS 137 KPR 66 KPR 138 KPR 67 TCK 139 KPR 68 ROM_B<0> 140 KPR 69 ROM_B<1> 141 VCC 70 KPR 142 KPR 71 KPR 143 RESET 72 GND 144 GND Legend : NC = Not Connected, unbonded pin PGND = Unused I/O configured as additional Ground pin TIE = Unused I/O floating -- must tie to VCC, GND or other signal KPR = Unused I/O with weak keeper (leave unconnected) VCC = Dedicated Power Pin GND = Dedicated Ground Pin TDI = Test Data In, JTAG pin TDO = Test Data Out, JTAG pin TCK = Test Clock, JTAG pin TMS = Test Mode Select, JTAG pin PROHIBITED = User reserved pin **************************** Compiler Options **************************** Following is a list of all global compiler options used by the fitter run. Device(s) Specified : xc95144xl-10-TQ144 Optimization Method : SPEED Multi-Level Logic Optimization : ON Ignore Timing Specifications : OFF Default Register Power Up Value : LOW Keep User Location Constraints : ON What-You-See-Is-What-You-Get : OFF Exhaustive Fitting : OFF Keep Unused Inputs : OFF Slew Rate : FAST Power Mode : STD Ground on Unused IOs : OFF Set I/O Pin Termination : KEEPER Global Clock Optimization : ON Global Set/Reset Optimization : ON Global Ouput Enable Optimization : ON Input Limit : 54 Pterm Limit : 25