Updated baxnet-driver ansd Z3-Interface
This commit is contained in:
MHeinrichs
@@ -44,8 +44,6 @@ PRIORITY=PRI/K/N,BPS/K/N,MTU/K/N,FULLDUPLEX/S,FLOWCONTROL/S,TIMER/K/N,MULTICAST/
|
||||
note: this switch should not be enabled in normal cases.
|
||||
The module features autoconfiguration that determines
|
||||
speed and duplex automatically.
|
||||
note(2): see miitool for changing speed/duplex
|
||||
settings at runtime.
|
||||
|
||||
PRIORITY - server task priority (default 1)
|
||||
|
||||
@@ -53,8 +51,8 @@ PRIORITY=PRI/K/N,BPS/K/N,MTU/K/N,FULLDUPLEX/S,FLOWCONTROL/S,TIMER/K/N,MULTICAST/
|
||||
|
||||
MTU - maximum transmission unit (default 1500)
|
||||
|
||||
MULTICAST - (V2.3+) override fine-grained automatic multicast filtering
|
||||
and accept all multicast frames (default: off)
|
||||
MULTICAST - obsolete, kept for config file backwards compatibility with
|
||||
old driver
|
||||
|
||||
FLOWCONTROL - enable automatic flow control that throttles incoming
|
||||
data when the hardware buffer gets full
|
||||
@@ -66,8 +64,6 @@ PRIORITY=PRI/K/N,BPS/K/N,MTU/K/N,FULLDUPLEX/S,FLOWCONTROL/S,TIMER/K/N,MULTICAST/
|
||||
Changelog:
|
||||
----------
|
||||
|
||||
2.3 - implemented fine grained multicast filter hashes
|
||||
|
||||
2.2 - some more tuning to RX/TX scheduling
|
||||
- added optional debug code to lowlevel routines
|
||||
- removed some obsolete bus transfers
|
||||
@@ -114,12 +110,11 @@ Changelog:
|
||||
Compilation / Development Notes
|
||||
-------------------------------
|
||||
|
||||
Either VBCC or GCC (tested with version 2.95 only) can be used for
|
||||
cross-compiles. General options for compiler usage can be found in
|
||||
Common.mk. Also, you might want to adapt the paths to your setup
|
||||
(PREFX,SYSINC). In addition to the regular NDK, the sana2.h is expected
|
||||
in the devices/ subdir of the includes. sana2.h may be found in the
|
||||
AmiTCP or Roadshow SDK, respectively.
|
||||
Either VBCC or GCC (tested with version 2.95 only) can be used. General
|
||||
options for compiler usage can be found in Common.mk. Also, you might want
|
||||
to adapt the paths to your setup (PREFX,SYSINC). In addition to the regular
|
||||
NDK, the sana2.h is expected in the devices/ subdir of the includes. sana2.h
|
||||
may be found in the AmiTCP or Roadshow SDK, respectively.
|
||||
|
||||
Call
|
||||
|
||||
@@ -130,15 +125,6 @@ for building the device.
|
||||
VBCC note: When calling the GNU Make port supplied with ADE/GG natively on AmigaOS3,
|
||||
please make sure that "vc" is within the search path of "/bin/sh".
|
||||
|
||||
Native compilation is also supported for GCC and VBCC. In addition, SAS/C
|
||||
smakefiles are provided for the hardware targets.
|
||||
|
||||
Call
|
||||
|
||||
smake -f smakefile.enc
|
||||
|
||||
for native building with SAS/C.
|
||||
|
||||
Conceptually, the driver was meant to support multiple hardware targets. Therefore,
|
||||
it features a SANA-II frontend (device.c,deviceheader.c,deviceinit.c), a main
|
||||
server running in a task (server.c) and several hardware backends. A new hardware
|
||||
|
||||
Binary file not shown.
Binary file not shown.
@@ -19,7 +19,7 @@
|
||||
#
|
||||
###############################################################################
|
||||
# debug = 1 will include string debugging for terminal/sushi/sashimi
|
||||
debug = 0
|
||||
debug = 1
|
||||
# compiler_vcc = 1 will trigger VBCC, else GCC
|
||||
compiler_vcc = 0
|
||||
|
||||
@@ -27,8 +27,8 @@ compiler_vcc = 0
|
||||
# prefix for system includes (ASM)
|
||||
# native AmigaOS compilation: set PREFX=GG: or PREFX=ADE:, depending on toolchain
|
||||
###############################################################################
|
||||
#PREFX = /opt/amigaos-68k/
|
||||
PREFX = gg:
|
||||
PREFX = /opt/amigaos-68k/
|
||||
#PREFX = gg:
|
||||
SYSINC = $(PREFX)os-include
|
||||
|
||||
###############################################################################
|
||||
|
||||
@@ -32,7 +32,7 @@ ASMOBJECTS = $(SUBDIR)/enc624j6l.o $(SUBDIR)/intervaltimer.o kprintf.o
|
||||
|
||||
DEVICEID=enc624j6net.device
|
||||
DEFINES = -DHW_DMA_TX # -DPROTO_V2EXPNET
|
||||
ASMDEFS = -DHW_DMA_TX # -DPROTO_V2EXPNET
|
||||
ASMDEFS = # -DPROTO_V2EXPNET
|
||||
CPU = 68020
|
||||
|
||||
DEVICEID2=enc624j6net.device_68000
|
||||
|
||||
@@ -19,10 +19,9 @@ _LVORawMayGetChar equ -$1fe
|
||||
;
|
||||
;
|
||||
;
|
||||
ifne DEBUG
|
||||
ifd DEBUG
|
||||
|
||||
; XREF _KPrintFa0a1
|
||||
; XREF _KPrintF
|
||||
XREF _KPrintF
|
||||
|
||||
WRITEDEBUG macro
|
||||
movem.l d0/d1/a0/a1,-(sp)
|
||||
@@ -52,7 +51,7 @@ WRITEDEBUG macro
|
||||
endif
|
||||
lea.l (\1),a0
|
||||
move.l sp,a1
|
||||
jsr _KPrintFa0a1
|
||||
jsr _KPrintF
|
||||
ifnb \2
|
||||
add.l #4,sp
|
||||
endif
|
||||
@@ -81,7 +80,7 @@ WRITEDEBUG macro
|
||||
endm
|
||||
else
|
||||
WRITEDEBUG macro
|
||||
;
|
||||
nop
|
||||
endm
|
||||
endc
|
||||
|
||||
@@ -118,7 +117,7 @@ WRITEOUT macro
|
||||
ifd DEBUG
|
||||
move.l \1,a0
|
||||
move.l sp,a1
|
||||
jsr _KPrintFa0a1
|
||||
jsr _KPrintF
|
||||
endif
|
||||
move.l \1,d1
|
||||
move.l sp,d2
|
||||
|
||||
@@ -75,12 +75,6 @@ const struct NSDeviceQueryResult NSDQueryAnswer = {
|
||||
#include "hw.h"
|
||||
#include "macros.h"
|
||||
|
||||
/* enable heavy debug (D2=beginIO) */
|
||||
#define D2(x)
|
||||
#define D4(x)
|
||||
/* #define D2(x) D(x) */
|
||||
/* #define D4(x) D(x) */
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -388,8 +382,7 @@ ASM SAVEDS VOID DevBeginIO( ASMR(a1) struct IOSana2Req *ioreq ASMREG(a1),
|
||||
/*ioreq->ios2_Req.io_Error = S2ERR_NO_ERROR;
|
||||
ioreq->ios2_WireError = S2WERR_GENERIC_ERROR;*/
|
||||
|
||||
/* heavy debug on beginIO */
|
||||
D2(("BeginIO command %ld unit %ld\n",(LONG)ioreq->ios2_Req.io_Command,unit));
|
||||
D(("BeginIO command %ld unit %ld\n",(LONG)ioreq->ios2_Req.io_Command,unit));
|
||||
|
||||
switch( ioreq->ios2_Req.io_Command )
|
||||
{
|
||||
|
||||
@@ -1,4 +1,3 @@
|
||||
;APS00000000000000000000000000000000000000000000000000000000000000000000000000000000
|
||||
; ------------------------------------------------------------------------------
|
||||
; | Lowlevel Access to memory mapped ENC624J600 in PSP mode |
|
||||
; | Henryk Richter <henryk.richter@gmx.net> |
|
||||
@@ -20,25 +19,19 @@
|
||||
; - _enc624j6l_RXReset -> won't recover from totally unresponsive chip (but exits gracefully)
|
||||
;
|
||||
; enable debugging code block (comment/uncomment, see below)
|
||||
DEBUG EQU 0
|
||||
DEBUG EQU 1
|
||||
GLOBALINT_BOARD EQU 1 ;if 1, then toggle board interrupt, else ENC624 INTIE
|
||||
|
||||
incdir src:baxnet/trunk/source/
|
||||
;Temp:Amiga/src/Zorro-LAN-IDE.git/Driver/enc624j6net/
|
||||
include "enc624j6net/registers.i"
|
||||
include "enc624j6net/macros.i"
|
||||
include "debug.i"
|
||||
|
||||
ifnd DEBUG
|
||||
DEBUG EQU 0
|
||||
endc
|
||||
|
||||
ifne 1
|
||||
include "debug.i"
|
||||
else
|
||||
WRITEDEBUG macro
|
||||
nop
|
||||
endm
|
||||
endc
|
||||
;
|
||||
ADD_4RX EQU 1 ;add 4 to valid RX size (fake CRC), fixes shapeshifter RAW treatment
|
||||
_OPT_LONGRESET EQU 0 ;in testing, don't enable
|
||||
@@ -141,6 +134,12 @@ _LVOSignal EQU -324
|
||||
|
||||
section code,code
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
; -----------------------------------------------------------------------------
|
||||
; | |
|
||||
; | Test/Debug code |
|
||||
@@ -278,13 +277,7 @@ regtests:
|
||||
READREG ESTAT,a0,d0
|
||||
READREG ECON1,a0,d1
|
||||
READREG MACON2,a0,d2
|
||||
; READREG MABBIPG,a0,d3
|
||||
|
||||
READREG ERXFCON,a0,d3
|
||||
READREG EHT1,a0,d4
|
||||
READREG EHT2,a0,d5
|
||||
READREG EHT3,a0,d6
|
||||
READREG EHT4,a0,d7
|
||||
READREG MABBIPG,a0,d3
|
||||
rts
|
||||
|
||||
|
||||
@@ -594,7 +587,6 @@ _enc624j6l_Init:
|
||||
WRITEREG ERXST,a0,d0 ;set RX start pointer (end will be $5fff)
|
||||
WRITEREG PNextPacket,a0,d0 ;set user read pointer
|
||||
|
||||
suba.l a1,a1 ;no multicast hash table (yet)
|
||||
bsr _enc624j6l_bc_mc_filter ;in: A0/D1, out: D0
|
||||
|
||||
move #RXSTOP_INIT&$fffe,d0
|
||||
@@ -652,7 +644,6 @@ _enc624j6l_Init:
|
||||
;
|
||||
; in: A0 - board base
|
||||
; D1 - init flags
|
||||
; A1 - multicast hash table (4x USHORT)
|
||||
;out: D0 >0 = OK
|
||||
; <=0 = FAIL
|
||||
_enc624j6l_bc_mc_filter:
|
||||
@@ -667,32 +658,15 @@ _enc624j6l_bc_mc_filter:
|
||||
move #ERXFCON_NOTMEEN|ERXFCON_MCEN|ERXFCON_BCEN|ERXFCON_UCEN|ERXFCON_MPEN|ERXFCON_CRCEN|ERXFCON_RUNTEN,d0
|
||||
bra.s .setfilter
|
||||
.no_promisc:
|
||||
moveq #PIO_INIT_MULTI_CAST,d0 ;all multicast ?
|
||||
moveq #PIO_INIT_MULTI_CAST,d0
|
||||
and d1,d0
|
||||
beq.s .no_multicast
|
||||
move #ERXFCON_MCEN|ERXFCON_BCEN|ERXFCON_UCEN|ERXFCON_MPEN|ERXFCON_CRCEN|ERXFCON_RUNTEN,d0
|
||||
bra.s .setfilter
|
||||
.no_multicast:
|
||||
move #ERXFCON_BCEN|ERXFCON_UCEN|ERXFCON_MPEN|ERXFCON_CRCEN|ERXFCON_RUNTEN,d0
|
||||
|
||||
; did we get a multicast hash table ?
|
||||
move.l a1,d1
|
||||
beq.s .nohashes
|
||||
AND #$ffff-ERXFCON_MCEN,d0 ;don't accept ALL multicast
|
||||
OR #ERXFCON_HTEN,d0 ;enable multicast hash table filter
|
||||
|
||||
move (a1),d1
|
||||
WRITEREG EHT1,a0,d1
|
||||
move 2(a1),d1
|
||||
WRITEREG EHT2,a0,d1
|
||||
move 4(a1),d1
|
||||
WRITEREG EHT3,a0,d1
|
||||
move 6(a1),d1
|
||||
WRITEREG EHT4,a0,d1
|
||||
.nohashes:
|
||||
|
||||
.setfilter:
|
||||
WRITEREG ERXFCON,a0,d0 ;set filter
|
||||
WRITEREG ERXFCON,a0,d0 ;set filter TODO: pattern matching stuff
|
||||
|
||||
moveq #1,d0
|
||||
.rts:
|
||||
|
||||
@@ -239,9 +239,8 @@ ASM SAVEDS int enc624j6l_SetOnline( ASMR(a0) void *board ASMREG(a0) );
|
||||
>=0 - OK
|
||||
*/
|
||||
ASM SAVEDS int enc624j6l_bc_mc_filter(
|
||||
ASMR(a0) void *board ASMREG(a0),
|
||||
ASMR(d1) unsigned long flags ASMREG(d1),
|
||||
ASMR(a1) unsigned short *mc_hashes ASMREG(a1));
|
||||
ASMR(a0) void *board ASMREG(a0),
|
||||
ASMR(d1) unsigned long flags ASMREG(d1) );
|
||||
|
||||
|
||||
/*
|
||||
|
||||
@@ -30,7 +30,6 @@ extern const BYTE DeviceName[];
|
||||
/* use generic board fields in current unit */
|
||||
#define duh_online du_hwl0
|
||||
#define duh_BASE du_hwp0
|
||||
#define duh_RefCount du_hwl1
|
||||
|
||||
#define HW_INTERVALDEF 100000L
|
||||
|
||||
@@ -106,7 +105,7 @@ ASM SAVEDS LONG hw_Find_Boards( ASMR(a0) DEVBASEP ASMREG(a0) )
|
||||
|
||||
/* bring board to sane state (i.e. perform soft reset) */
|
||||
/* if( boardbase < (APTR)0x40000000 ) */ /* debug only */
|
||||
enc624j6l_CheckBoard( boardbase );
|
||||
enc624j6l_CheckBoard( boardbase );
|
||||
}
|
||||
ret = i;
|
||||
D(("%ld boards found\n",ret));
|
||||
@@ -120,33 +119,7 @@ ASM SAVEDS LONG hw_Find_Boards( ASMR(a0) DEVBASEP ASMREG(a0) )
|
||||
ASM SAVEDS LONG hw_AllocBoard( ASMR(a0) DEVBASEP ASMREG(a0),
|
||||
ASMR(d0) ULONG unit ASMREG(d0) )
|
||||
{
|
||||
#if 0
|
||||
LONG i;
|
||||
struct ConfigDev *cfg = (0);
|
||||
|
||||
if( unit > db->db_NBoards )
|
||||
return 0;
|
||||
|
||||
for( i=0 ; i < db->db_NBoards ; i++ )
|
||||
{
|
||||
cfg = FindConfigDev( cfg, ENC_MANUFACTURER, ENC_BOARD );
|
||||
if( !cfg )
|
||||
return 0;
|
||||
if( (APTR)cfg->cd_BoardAddr == db->db_Units[unit].duh_BASE )
|
||||
break;
|
||||
}
|
||||
|
||||
if( (APTR)cfg->cd_BoardAddr != db->db_Units[unit].duh_BASE )
|
||||
return 0;
|
||||
|
||||
if( db->db_Units[unit].duh_RefCount == 0 )
|
||||
{
|
||||
ObtainConfigBinding();
|
||||
|
||||
ReleaseConfigBinding();
|
||||
}
|
||||
db->db_Units[unit].duh_RefCount++;
|
||||
#endif
|
||||
/* is there a way to lock a ZII Board ? */
|
||||
return 1;
|
||||
}
|
||||
|
||||
@@ -154,20 +127,6 @@ ASM SAVEDS LONG hw_AllocBoard( ASMR(a0) DEVBASEP ASMREG(a0),
|
||||
ASM SAVEDS LONG hw_ReleaseBoard( ASMR(a0) DEVBASEP ASMREG(a0),
|
||||
ASMR(d0) ULONG unit ASMREG(d0) )
|
||||
{
|
||||
#if 0
|
||||
if( unit > db->db_NBoards )
|
||||
return 0;
|
||||
|
||||
for( i=0 ; i < db->db_NBoards ; i++ )
|
||||
{
|
||||
cfg = FindConfigDev( cfg, ENC_MANUFACTURER, ENC_BOARD );
|
||||
if( !cfg )
|
||||
return 0;
|
||||
if( (APTR)cfg->cd_BoardAddr == db->db_Units[unit].duh_BASE )
|
||||
break;
|
||||
}
|
||||
|
||||
#endif
|
||||
return 1;
|
||||
}
|
||||
|
||||
@@ -468,143 +427,27 @@ ASM SAVEDS LONG hw_write_phy( ASMR(a0) DEVBASEP ASMREG(
|
||||
return enc624j6l_WritePHY( boardbase, reg, value );
|
||||
}
|
||||
|
||||
/*
|
||||
calculate CRC32 for MAC address hashing
|
||||
slow but relatively short (and can be adapted to other
|
||||
polynoms easily)
|
||||
*/
|
||||
ASM ULONG myhw_CRC32( ASMR(a0) UBYTE *buffer ASMREG(a0),
|
||||
ASMR(d0) ULONG nbytes ASMREG(d0) )
|
||||
{
|
||||
UWORD i,j;
|
||||
ULONG t,crc = 0xffffffff;
|
||||
ULONG poly = 0x04c11db7;
|
||||
|
||||
for( j = 0 ; j < nbytes ; j++ )
|
||||
{
|
||||
for( i = 0 ; i < 8 ; i++ )
|
||||
{
|
||||
t = crc>>31;
|
||||
crc <<= 1;
|
||||
if( ( t ^ ( buffer[j] >> i ) ) & 0x01 )
|
||||
crc ^= poly;
|
||||
}
|
||||
}
|
||||
|
||||
return crc;
|
||||
}
|
||||
|
||||
#if 0
|
||||
ASM ULONG CMPgeMAC( ASMR(a0) UBYTE *cur ASMREG(a0),
|
||||
ASMR(a1) UBYTE *cmp ASMREG(a1) )
|
||||
{
|
||||
USHORT i;
|
||||
ULONG res = 1;
|
||||
|
||||
for( i = 0 ; i < 6 ; i++ )
|
||||
{
|
||||
if( cur[i] > cmp[i] )
|
||||
break;
|
||||
if( cur[i] < cmp[i] )
|
||||
{
|
||||
res = 0;
|
||||
break;
|
||||
}
|
||||
}
|
||||
return res;
|
||||
}
|
||||
#endif
|
||||
|
||||
ASM ULONG CMPleMAC( ASMR(a0) UBYTE *cur ASMREG(a0),
|
||||
ASMR(a1) UBYTE *cmp ASMREG(a1) )
|
||||
{
|
||||
USHORT i;
|
||||
ULONG res = 1;
|
||||
|
||||
for( i = 0 ; i < 6 ; i++ )
|
||||
{
|
||||
if( cur[i] < cmp[i] )
|
||||
break;
|
||||
if( cur[i] > cmp[i] )
|
||||
{
|
||||
res = 0;
|
||||
break;
|
||||
}
|
||||
}
|
||||
return res;
|
||||
}
|
||||
|
||||
|
||||
ASM void INCMAC( ASMR(a0) UBYTE *curmc ASMREG(a0) )
|
||||
{
|
||||
SHORT i;
|
||||
for( i=5 ; i >= 0 ; i-- )
|
||||
{
|
||||
curmc[i]++;
|
||||
if( curmc[i] != 0 )
|
||||
{
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/* TODO: implement Multicast hashing */
|
||||
ASM SAVEDS LONG hw_change_multicast( ASMR(a0) DEVBASEP ASMREG(a0),
|
||||
ASMR(d0) ULONG unit ASMREG(d0),
|
||||
ASMR(a1) struct List *mcastlist ASMREG(a1) )
|
||||
{
|
||||
APTR boardbase = db->db_Units[unit].duh_BASE;
|
||||
struct HWData *hwd = &db->db_hwdat;
|
||||
ULONG flags;
|
||||
ULONG crc,curhash;
|
||||
USHORT mc_hashes[4] = {0,0,0,0}; /* EHT1, EHT2, EHT3, EHT4 */
|
||||
USHORT *hash_tab;
|
||||
struct MCastEntry *mc;
|
||||
UBYTE *curmc;
|
||||
/* TODO: implement Multicast hashing */
|
||||
APTR boardbase = db->db_Units[unit].duh_BASE;
|
||||
ULONG flags;
|
||||
|
||||
flags = PIO_INIT_BROAD_CAST;
|
||||
|
||||
if( db->db_Units[0].du_Flags & DUF_PROMISC )
|
||||
flags |= PIO_INIT_PROMISC;
|
||||
|
||||
if( hwd->multicast ) /* accept ALL multicast ? (config option) */
|
||||
/* list non-empty ? (kludge right now, can be done more fine grained) */
|
||||
if( mcastlist->lh_Head->ln_Succ )
|
||||
flags |= PIO_INIT_MULTI_CAST;
|
||||
|
||||
/* list non-empty ? */
|
||||
hash_tab = NULL;
|
||||
if( mcastlist->lh_Head->ln_Succ )
|
||||
{
|
||||
/* flags |= PIO_INIT_MULTI_CAST; */ /* see above */
|
||||
hash_tab = mc_hashes;
|
||||
|
||||
for( mc = (struct MCastEntry *)mcastlist->lh_Head;
|
||||
mc->mce_Node.mln_Succ ;
|
||||
mc=(struct MCastEntry*)mc->mce_Node.mln_Succ )
|
||||
{
|
||||
curmc = mc->mce_start;
|
||||
while( CMPleMAC( curmc, mc->mce_stop ) )
|
||||
{
|
||||
D(("CMPleMAC %ld %02lx%02lx%02lx%02lx%02lx%02lx - %02lx%02lx%02lx%02lx%02lx%02lx\n",\
|
||||
CMPleMAC( curmc, mc->mce_stop ),\
|
||||
(ULONG)curmc[0],(ULONG)curmc[1],\
|
||||
(ULONG)curmc[2],(ULONG)curmc[3],\
|
||||
(ULONG)curmc[4],(ULONG)curmc[5],\
|
||||
(ULONG)mc->mce_stop[0],(ULONG)mc->mce_stop[1],\
|
||||
(ULONG)mc->mce_stop[2],(ULONG)mc->mce_stop[3],\
|
||||
(ULONG)mc->mce_stop[4],(ULONG)mc->mce_stop[5] \
|
||||
));
|
||||
|
||||
crc = myhw_CRC32( mc->mce_start, 6 );
|
||||
curhash = (crc & 0x1f800000)>>23; /* 2 bit reg, 4 bit hash pos in reg */
|
||||
mc_hashes[ ((curhash >> 4)&3) ] |= 1<<(curhash&0xf);
|
||||
INCMAC( curmc );
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
D(("hw_change_multicast board %lx flags %lx hashtab %lx\n",(ULONG)boardbase,(ULONG)flags,(ULONG)hash_tab));
|
||||
|
||||
enc624j6l_bc_mc_filter(boardbase, flags, hash_tab );/* flags & (PIO_INIT_BROAD_CAST|PIO_INIT_MULTI_CAST) ); */
|
||||
enc624j6l_bc_mc_filter(boardbase, flags );/* flags & (PIO_INIT_BROAD_CAST|PIO_INIT_MULTI_CAST) ); */
|
||||
|
||||
return 1;
|
||||
}
|
||||
@@ -651,7 +494,7 @@ void myhw_ControlInterrupts( DEVBASEP )
|
||||
hwd->hwd_Interrupt.is_Code = (void(*)())enc624j6l_IntServer_List;
|
||||
hwd->hwd_Interrupt.is_Data = &hwd->hwd_act_boards[0];
|
||||
hwd->hwd_Interrupt.is_Node.ln_Type = NT_INTERRUPT;
|
||||
hwd->hwd_Interrupt.is_Node.ln_Pri = 126; /* 51; */
|
||||
hwd->hwd_Interrupt.is_Node.ln_Pri = 51;
|
||||
hwd->hwd_Interrupt.is_Node.ln_Name = (char*)intname;
|
||||
AddIntServer( HW_INTSOURCE, &hwd->hwd_Interrupt );
|
||||
}
|
||||
|
||||
@@ -22,7 +22,7 @@
|
||||
struct HWData {
|
||||
struct Interrupt hwd_Interrupt; /* keep the interrupt at top of HWData !! */
|
||||
struct SignalSemaphore hwd_Sem; /* list locking (global per unit) */
|
||||
APTR hwd_act_boards[MAX_UNITS+1+3+1]; /* poll all active boards by ptr in interrupt, MAGIC_WORD INIT, NULL terminated, followed by SigTask,Sigbit,ExecBase */
|
||||
APTR hwd_act_boards[MAX_UNITS+1+3]; /* poll all active boards by ptr in interrupt, NULL terminated, followed by SigTask,Sigbit,ExecBase */
|
||||
|
||||
ULONG hwd_SigMask; /* signal mask to wait for in server main instance */
|
||||
|
||||
|
||||
@@ -51,7 +51,7 @@ struct devbase;
|
||||
#define HW_MACB_SPEEDS_END 18 /* this is the next free bit */
|
||||
#define HW_MAC_SPEEDSMASK ((1<<HW_MACB_SPEEDS_END)-4)
|
||||
#define HW_MAC_NEXTSPEED(_a_) ( (_a_)+2 )
|
||||
#define HW_MAGIC_WORD 0xB00BDEED
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -39,5 +39,5 @@ HW_MACB_SPEED5000 EQU 10
|
||||
HW_MACB_SPEED10000 EQU 12 ; Am I optimistic ?
|
||||
HW_MACB_SPEEDS_END EQU 14 ; this is the next free bit
|
||||
HW_MAC_SPEEDSMASK EQU ((1<<HW_MACB_SPEEDS_END)-4)
|
||||
HW_MAGIC_WORD EQU $B00BDEED
|
||||
|
||||
endc ;_INC_HW_I
|
||||
|
||||
@@ -14,18 +14,11 @@ _LVORawIOInit equ -$1f8
|
||||
_LVORawMayGetChar equ -$1fe
|
||||
endc
|
||||
|
||||
; XDEF _KPrintF
|
||||
XDEF _KPrintFa0a1
|
||||
|
||||
;_KPrintF:
|
||||
rts
|
||||
move.l 4(sp),a0
|
||||
lea 8(sp),a1
|
||||
; fall through
|
||||
XDEF _KPrintF
|
||||
|
||||
;A0 = format
|
||||
;A1 = arguments
|
||||
_KPrintFa0a1:
|
||||
_KPrintF:
|
||||
; ifd DEBUG
|
||||
|
||||
movem.l d0-d2/a0-a3/a6,-(sp)
|
||||
|
||||
@@ -41,12 +41,6 @@ static LONG server_queryext( DEVBASEP, ULONG unit, struct IOSana2Req *ioreq );
|
||||
/* this limits the number of processed read requests per run when enabled */
|
||||
#define ONE_READ_REQ 2
|
||||
|
||||
/* heavy debug on read/write */
|
||||
#define D2(x)
|
||||
#define D4(x)
|
||||
/* #define D2(x) D(x) */
|
||||
/* #define D4(x) D(x) */
|
||||
|
||||
|
||||
|
||||
/* (avoid external link libraries) this call is not time critical */
|
||||
@@ -390,15 +384,6 @@ static LONG server_changeMulticast( DEVBASEP, ULONG unit, struct IOSana2Req *ior
|
||||
COPYMAC( entry->mce_start, ioreq->ios2_SrcAddr );
|
||||
COPYMAC( entry->mce_stop, ioreq->ios2_SrcAddr );
|
||||
|
||||
D(("ADD Multicast MAC %02lx%02lx%02lx%02lx%02lx%02lx - %02lx%02lx%02lx%02lx%02lx%02lx\n",\
|
||||
(ULONG)entry->mce_start[0],(ULONG)entry->mce_start[1],\
|
||||
(ULONG)entry->mce_start[2],(ULONG)entry->mce_start[3],\
|
||||
(ULONG)entry->mce_start[4],(ULONG)entry->mce_start[5],\
|
||||
(ULONG)entry->mce_stop[0],(ULONG)entry->mce_stop[1],\
|
||||
(ULONG)entry->mce_stop[2],(ULONG)entry->mce_stop[3],\
|
||||
(ULONG)entry->mce_stop[4],(ULONG)entry->mce_stop[5] \
|
||||
));
|
||||
|
||||
ADDTAIL( &db->db_svdat.sv_mclist, entry );
|
||||
|
||||
apply:
|
||||
@@ -730,7 +715,7 @@ static LONG write_frame( DEVBASEP, ULONG unit, struct IOSana2Req *ioreq )
|
||||
UBYTE *header_ptr;
|
||||
#endif
|
||||
|
||||
D2(("write: type %08lx, size %ld\n",ioreq->ios2_PacketType,
|
||||
D(("write: type %08lx, size %ld\n",ioreq->ios2_PacketType,
|
||||
ioreq->ios2_DataLength));
|
||||
|
||||
frame = db->db_svdat.sv_frame;
|
||||
@@ -780,13 +765,13 @@ static LONG write_frame( DEVBASEP, ULONG unit, struct IOSana2Req *ioreq )
|
||||
if( (*dbm->dbm_CopyFromBuffer32)(copy_ptr,ioreq->ios2_Data, ioreq->ios2_DataLength) )
|
||||
{
|
||||
send:
|
||||
D2(("+hw_send\n"));
|
||||
D(("+hw_send\n"));
|
||||
#ifdef HW_DMA_TX
|
||||
ret = hw_send_frame(db, unit, copy_ptr, framesize, header_ptr ) ? SERR_OK:SERR_ERROR;
|
||||
#else
|
||||
ret = hw_send_frame(db, unit, frame, framesize ) ? SERR_OK : SERR_ERROR;
|
||||
#endif
|
||||
D2(("-hw_send\n"));
|
||||
D(("-hw_send\n"));
|
||||
}
|
||||
else
|
||||
{
|
||||
@@ -907,14 +892,14 @@ static void server_read_frame( DEVBASEP, ULONG unit, struct IOSana2Req *ioreq, U
|
||||
{
|
||||
frame += 14; /* skip DST,SRC,Type */
|
||||
framesize -= 18; /* also remove CRC */
|
||||
D4(("plain mode: frame flags %ld\n",bcflag));
|
||||
D(("plain mode: frame flags %ld\n",bcflag));
|
||||
}
|
||||
ioreq->ios2_Req.io_Flags &= SANA2IOF_RAW; /* ignore all other flags */
|
||||
ioreq->ios2_Req.io_Flags |= bcflag;
|
||||
ioreq->ios2_Req.io_Error = 0;
|
||||
ioreq->ios2_WireError = 0;
|
||||
|
||||
D4(("ReadFrm IO %lx, DBM %lx frm %lx frmsz %ld\n",(ULONG)ioreq,(ULONG)dbm,(ULONG)frame,framesize));
|
||||
D(("ReadFrm IO %lx, DBM %lx frm %lx frmsz %ld\n",(ULONG)ioreq,(ULONG)dbm,(ULONG)frame,framesize));
|
||||
|
||||
if( dbm->dbm_PacketFilter ) /* Filter Packets ? */
|
||||
{
|
||||
@@ -933,7 +918,7 @@ static void server_read_frame( DEVBASEP, ULONG unit, struct IOSana2Req *ioreq, U
|
||||
ioreq->ios2_WireError = S2WERR_BUFF_ERROR;
|
||||
}
|
||||
}
|
||||
D4(("Copied io_Error %ld\n",(LONG)ioreq->ios2_Req.io_Error));
|
||||
D(("Copied io_Error %ld\n",(LONG)ioreq->ios2_Req.io_Error));
|
||||
|
||||
Remove( (struct Node*)ioreq );
|
||||
svTermIO( db, ioreq );
|
||||
@@ -961,7 +946,7 @@ static LONG server_readqueue( DEVBASEP, ULONG unit )
|
||||
/* TODO: devstats */
|
||||
frametype = *( (USHORT*)(frame+12) );
|
||||
|
||||
D4(("Have Frame size %ld type %ld\n",framesize,frametype));
|
||||
D(("Have Frame size %ld type %ld\n",framesize,frametype));
|
||||
|
||||
ObtainSemaphore( &db->db_Units[unit].du_Sem );
|
||||
|
||||
@@ -979,14 +964,14 @@ orphan:
|
||||
ioreq = (struct IOSana2Req *)GetHead( (struct List*)&db->db_Units[unit].du_ReadOrphans );
|
||||
if( ioreq )
|
||||
{
|
||||
D4(("Orphaned Frame\n"));
|
||||
D(("Orphaned Frame\n"));
|
||||
|
||||
ioreq->ios2_PacketType = frametype;
|
||||
server_read_frame( db, unit, ioreq, frame, framesize );
|
||||
}
|
||||
else
|
||||
{
|
||||
D4(("No ioreq for orphaned frame\n"));
|
||||
D(("No ioreq for orphaned frame\n"));
|
||||
}
|
||||
|
||||
goto nextframe;
|
||||
@@ -1020,7 +1005,7 @@ havetype:
|
||||
{
|
||||
db->db_Units[unit].du_DevStats.Overruns++;
|
||||
type->srt_Sana2PacketTypeStats.PacketsDropped++;
|
||||
D4(("No Reader for frame\n"));
|
||||
D(("No Reader for frame\n"));
|
||||
goto orphan; /* does it help if we give the frame to the orphan list? */
|
||||
}
|
||||
nextframe:
|
||||
@@ -1109,9 +1094,9 @@ VOID SAVEDS ServerTask(void)
|
||||
}
|
||||
if( hw_recv_pending(db,i) )
|
||||
{
|
||||
D4(("Read on unit %ld start\n",i));
|
||||
D(("Read on unit %ld start\n",i));
|
||||
server_readqueue( db, i );
|
||||
D4(("Read on unit %ld stop\n",i));
|
||||
D(("Read on unit %ld stop\n",i));
|
||||
action = 1;
|
||||
}
|
||||
}
|
||||
|
||||
@@ -46,7 +46,7 @@ ASMDEFS1 = -DHW_DMA_TX=1
|
||||
###############################################################################
|
||||
# debug = 1 will include string debugging for terminal/sushi/sashimi
|
||||
# not enabled yet in SAS/C makefile
|
||||
#debug = 0
|
||||
debug = 0
|
||||
|
||||
###############################################################################
|
||||
# prefix for system includes (ASM)
|
||||
|
||||
@@ -9,9 +9,9 @@
|
||||
#define _INC_VERSION_H
|
||||
|
||||
#define DEVICEVERSION 2
|
||||
#define DEVICEREVISION 3
|
||||
#define DEVICEREVISION 2
|
||||
#define DEVICEEXTRA
|
||||
/* #define DEVICEEXTRA Beta */
|
||||
#define DEVICEDATE 04.04.2019
|
||||
#define DEVICEDATE 10.03.2019
|
||||
|
||||
#endif
|
||||
|
||||
@@ -68,7 +68,7 @@
|
||||
<status xil_pn:value="SuccessfullyRun"/>
|
||||
<status xil_pn:value="ReadyToRun"/>
|
||||
</transform>
|
||||
<transform xil_pn:end_ts="1551994116" xil_pn:in_ck="-2520376148396271922" xil_pn:name="TRANEXT_xstsynthesize_xc9500xl" xil_pn:prop_ck="-5899415373064323687" xil_pn:start_ts="1551994105">
|
||||
<transform xil_pn:end_ts="1558561821" xil_pn:in_ck="-2520376148396271922" xil_pn:name="TRANEXT_xstsynthesize_xc9500xl" xil_pn:prop_ck="-5742752562858310575" xil_pn:start_ts="1558561809">
|
||||
<status xil_pn:value="SuccessfullyRun"/>
|
||||
<status xil_pn:value="WarningsGenerated"/>
|
||||
<status xil_pn:value="ReadyToRun"/>
|
||||
@@ -89,7 +89,7 @@
|
||||
<status xil_pn:value="SuccessfullyRun"/>
|
||||
<status xil_pn:value="ReadyToRun"/>
|
||||
</transform>
|
||||
<transform xil_pn:end_ts="1551994125" xil_pn:in_ck="-8547647177936735053" xil_pn:name="TRAN_ngdbuild" xil_pn:prop_ck="6932115226421322529" xil_pn:start_ts="1551994116">
|
||||
<transform xil_pn:end_ts="1558561829" xil_pn:in_ck="-8547647177936735053" xil_pn:name="TRAN_ngdbuild" xil_pn:prop_ck="6932115226421322529" xil_pn:start_ts="1558561821">
|
||||
<status xil_pn:value="SuccessfullyRun"/>
|
||||
<status xil_pn:value="ReadyToRun"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP.bld"/>
|
||||
@@ -98,7 +98,7 @@
|
||||
<outfile xil_pn:name="_ngo"/>
|
||||
<outfile xil_pn:name="_xmsgs/ngdbuild.xmsgs"/>
|
||||
</transform>
|
||||
<transform xil_pn:end_ts="1551994174" xil_pn:in_ck="-2520376148396280667" xil_pn:name="TRANEXT_vm6File_xc9500xl" xil_pn:prop_ck="-1014768965495450326" xil_pn:start_ts="1551994125">
|
||||
<transform xil_pn:end_ts="1558561868" xil_pn:in_ck="-2520376148396280667" xil_pn:name="TRANEXT_vm6File_xc9500xl" xil_pn:prop_ck="-1014768965495450326" xil_pn:start_ts="1558561829">
|
||||
<status xil_pn:value="SuccessfullyRun"/>
|
||||
<status xil_pn:value="WarningsGenerated"/>
|
||||
<status xil_pn:value="ReadyToRun"/>
|
||||
@@ -116,7 +116,7 @@
|
||||
<outfile xil_pn:name="LAN_IDE_CP_html"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP_pad.csv"/>
|
||||
</transform>
|
||||
<transform xil_pn:end_ts="1551994176" xil_pn:in_ck="-2520376148396271803" xil_pn:name="TRANEXT_crtProg_xc9500" xil_pn:prop_ck="-6294026017969277533" xil_pn:start_ts="1551994174">
|
||||
<transform xil_pn:end_ts="1558561871" xil_pn:in_ck="-2520376148396271803" xil_pn:name="TRANEXT_crtProg_xc9500" xil_pn:prop_ck="-6294026017969277533" xil_pn:start_ts="1558561868">
|
||||
<status xil_pn:value="SuccessfullyRun"/>
|
||||
<status xil_pn:value="ReadyToRun"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP.jed"/>
|
||||
|
||||
@@ -29,7 +29,7 @@ NGDBUILD Design Results Summary:
|
||||
Number of errors: 0
|
||||
Number of warnings: 0
|
||||
|
||||
Total memory usage is 4418684 kilobytes
|
||||
Total memory usage is 4418692 kilobytes
|
||||
|
||||
Writing NGD file "LAN_IDE_CP.ngd" ...
|
||||
Total REAL time to NGDBUILD completion: 5 sec
|
||||
|
||||
@@ -636,3 +636,9 @@ cpldfit -intstyle ise -p xc95288xl-10-TQ144 -ofmt vhdl -optimize speed -htmlrpt
|
||||
XSLTProcess LAN_IDE_CP_build.xml
|
||||
tsim -intstyle ise LAN_IDE_CP LAN_IDE_CP.nga
|
||||
hprep6 -s IEEE1149 -n LAN_IDE_CP -i LAN_IDE_CP
|
||||
xst -intstyle ise -ifn "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE/LAN_IDE_CP.xst" -ofn "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE/LAN_IDE_CP.syr"
|
||||
ngdbuild -intstyle ise -dd _ngo -uc pinlist.ucf -p xc95288xl-TQ144-10 LAN_IDE_CP.ngc LAN_IDE_CP.ngd
|
||||
cpldfit -intstyle ise -p xc95288xl-10-TQ144 -ofmt vhdl -optimize speed -htmlrpt -loc on -slew fast -init low -inputs 54 -pterms 25 -unused float -power std -terminate keeper LAN_IDE_CP.ngd
|
||||
XSLTProcess LAN_IDE_CP_build.xml
|
||||
tsim -intstyle ise LAN_IDE_CP LAN_IDE_CP.nga
|
||||
hprep6 -s IEEE1149 -n LAN_IDE_CP -i LAN_IDE_CP
|
||||
|
||||
File diff suppressed because one or more lines are too long
File diff suppressed because one or more lines are too long
File diff suppressed because one or more lines are too long
File diff suppressed because one or more lines are too long
@@ -1,7 +1,7 @@
|
||||
Release 8.1i - Fit P.20131013
|
||||
Copyright(c) 1995-2003 Xilinx Inc. All rights reserved
|
||||
|
||||
3- 7-2019 11:51PM
|
||||
5-22-2019 11:50PM
|
||||
|
||||
NOTE: This file is designed to be imported into a spreadsheet program
|
||||
such as Microsoft Excel for viewing, printing and sorting. The pipe '|'
|
||||
|
||||
@@ -1,7 +1,7 @@
|
||||
|
||||
cpldfit: version P.20131013 Xilinx Inc.
|
||||
Fitter Report
|
||||
Design Name: LAN_IDE_CP Date: 3- 7-2019, 11:51PM
|
||||
Design Name: LAN_IDE_CP Date: 5-22-2019, 11:50PM
|
||||
Device Used: XC95288XL-10-TQ144
|
||||
Fitting Status: Successful
|
||||
|
||||
|
||||
@@ -4,13 +4,13 @@ Copyright (c) 1995-2013 Xilinx, Inc. All rights reserved.
|
||||
|
||||
|
||||
Total REAL time to Xst completion: 0.00 secs
|
||||
Total CPU time to Xst completion: 0.13 secs
|
||||
Total CPU time to Xst completion: 0.17 secs
|
||||
|
||||
--> Parameter xsthdpdir set to xst
|
||||
|
||||
|
||||
Total REAL time to Xst completion: 0.00 secs
|
||||
Total CPU time to Xst completion: 0.13 secs
|
||||
Total CPU time to Xst completion: 0.17 secs
|
||||
|
||||
--> Reading design: LAN_IDE_CP.prj
|
||||
|
||||
@@ -433,11 +433,11 @@ Cell Usage :
|
||||
|
||||
|
||||
Total REAL time to Xst completion: 9.00 secs
|
||||
Total CPU time to Xst completion: 9.07 secs
|
||||
Total CPU time to Xst completion: 9.01 secs
|
||||
|
||||
-->
|
||||
|
||||
Total memory usage is 4534748 kilobytes
|
||||
Total memory usage is 4534756 kilobytes
|
||||
|
||||
Number of errors : 0 ( 0 filtered)
|
||||
Number of warnings : 56 ( 0 filtered)
|
||||
|
||||
File diff suppressed because one or more lines are too long
@@ -5,14 +5,14 @@
|
||||
The structure and the elements are likely to change over the next few releases.
|
||||
This means code written to parse this file will need to be revisited each subsequent release.-->
|
||||
|
||||
<application stringID="NgdBuild" timeStamp="Thu Mar 07 23:50:43 2019">
|
||||
<application stringID="NgdBuild" timeStamp="Wed May 22 23:50:28 2019">
|
||||
<section stringID="User_Env">
|
||||
<table stringID="User_EnvVar">
|
||||
<column stringID="variable"/>
|
||||
<column stringID="value"/>
|
||||
<row stringID="row" value="0">
|
||||
<item stringID="variable" value="Path"/>
|
||||
<item stringID="value" value="C:\Xilinx\14.7\ISE_DS\ISE\\lib\nt64;C:\Xilinx\14.7\ISE_DS\ISE\\bin\nt64;C:\Xilinx\14.7\ISE_DS\ISE\bin\nt64;C:\Xilinx\14.7\ISE_DS\ISE\lib\nt64;C:\Xilinx\14.7\ISE_DS\ISE\..\..\..\DocNav;C:\Xilinx\14.7\ISE_DS\PlanAhead\bin;C:\Xilinx\14.7\ISE_DS\EDK\bin\nt64;C:\Xilinx\14.7\ISE_DS\EDK\lib\nt64;C:\Xilinx\14.7\ISE_DS\EDK\gnu\microblaze\nt\bin;C:\Xilinx\14.7\ISE_DS\EDK\gnu\powerpc-eabi\nt\bin;C:\Xilinx\14.7\ISE_DS\EDK\gnuwin\bin;C:\Xilinx\14.7\ISE_DS\EDK\gnu\arm\nt\bin;C:\Xilinx\14.7\ISE_DS\EDK\gnu\microblaze\linux_toolchain\nt64_be\bin;C:\Xilinx\14.7\ISE_DS\EDK\gnu\microblaze\linux_toolchain\nt64_le\bin;C:\Xilinx\14.7\ISE_DS\common\bin\nt64;C:\Xilinx\14.7\ISE_DS\common\lib\nt64;C:\Program Files (x86)\Common Files\Oracle\Java\javapath;E:\ispLEVER_Classic2_0\ispcpld\bin;E:\ispLEVER_Classic2_0\ispFPGA\bin\nt;E:\ispLEVER_Classic2_0\active-hdl\BIN;C:\ProgramData\Oracle\Java\javapath;C:\SynaptiCAD\bin\win32;C:\Program Files\Java\jre7\bin;C\Windows\System32;C:\Program Files (x86)\WinAVR\bin;C:\Program Files (x86)\WinAVR\utils\bin;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\SSH Communications Security\SSH Secure Shell;C:\Program Files (x86)\UltraEdit;c:\Xilinx\14.6\ISE_DS\ISE\bin\nt64;C:\ispLever\ispcpld\bin;C:\ispLever\ispFPGA\bin\nt;C:\ispLever\active-hdl\BIN;C:\Program Files\WinRAR;C:\SynaptiCAD\bin;C:\Program Files (x86)\Windows Kits\8.1\Windows Performance Toolkit\;C:\Program Files\Microsoft SQL Server\110\Tools\Binn\;C:\Program Files (x86)\Microsoft SDKs\TypeScript\1.0\;C:\Program Files\Microsoft SQL Server\120\Tools\Binn\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\AMD\ATI.ACE\Core-Static;C:\Windows\System32\OpenSSH\;%PATH;C:\Users\Matze\Amiga\development\VBCC\bin;C:\Program Files (x86)\IDM Computer Solutions\UltraEdit\;C:\Program Files (x86)\UltraEdit\;C:\Program Files\Java\jdk1.7.0_02\bin;C:\Users\Matze\AppData\Local\Microsoft\WindowsApps;C:\Users\Matze\adb-fastboot\platform-tools"/>
|
||||
<item stringID="value" value="C:\Xilinx\14.7\ISE_DS\ISE\\lib\nt64;C:\Xilinx\14.7\ISE_DS\ISE\\bin\nt64;C:\Xilinx\14.7\ISE_DS\ISE\bin\nt64;C:\Xilinx\14.7\ISE_DS\ISE\lib\nt64;C:\Xilinx\14.7\ISE_DS\ISE\..\..\..\DocNav;C:\Xilinx\14.7\ISE_DS\PlanAhead\bin;C:\Xilinx\14.7\ISE_DS\EDK\bin\nt64;C:\Xilinx\14.7\ISE_DS\EDK\lib\nt64;C:\Xilinx\14.7\ISE_DS\EDK\gnu\microblaze\nt\bin;C:\Xilinx\14.7\ISE_DS\EDK\gnu\powerpc-eabi\nt\bin;C:\Xilinx\14.7\ISE_DS\EDK\gnuwin\bin;C:\Xilinx\14.7\ISE_DS\EDK\gnu\arm\nt\bin;C:\Xilinx\14.7\ISE_DS\EDK\gnu\microblaze\linux_toolchain\nt64_be\bin;C:\Xilinx\14.7\ISE_DS\EDK\gnu\microblaze\linux_toolchain\nt64_le\bin;C:\Xilinx\14.7\ISE_DS\common\bin\nt64;C:\Xilinx\14.7\ISE_DS\common\lib\nt64;C:\Program Files (x86)\WinAVR\bin;C:\Program Files (x86)\WinAVR\utils\bin;C:\Windows\System32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\Java\jre-10.0.2\bin;C:\Program Files (x86)\UltraEdit;%PATH;C:\Users\Matze\Amiga\development\VBCC\bin;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\IDM Computer Solutions\UltraEdit\;C:\Program Files (x86)\SSH Communications Security\SSH Secure Shell;C:\Program Files (x86)\UltraEdit\;C:\Program Files\Java\jdk1.7.0_02\bin;C:\Users\Matze\AppData\Local\Microsoft\WindowsApps;C:\Users\Matze\adb-fastboot\platform-tools"/>
|
||||
</row>
|
||||
<row stringID="row" value="1">
|
||||
<item stringID="variable" value="PATHEXT"/>
|
||||
|
||||
@@ -1,7 +1,7 @@
|
||||
Release 8.1i - Fit P.20131013
|
||||
Copyright(c) 1995-2003 Xilinx Inc. All rights reserved
|
||||
|
||||
3- 7-2019 11:51PM
|
||||
5-22-2019 11:50PM
|
||||
|
||||
NOTE: This file is designed to be imported into a spreadsheet program
|
||||
such as Microsoft Excel for viewing, printing and sorting. The comma ','
|
||||
|
||||
|
@@ -5,14 +5,14 @@
|
||||
The structure and the elements are likely to change over the next few releases.
|
||||
This means code written to parse this file will need to be revisited each subsequent release.-->
|
||||
|
||||
<application stringID="Xst" timeStamp="Thu Mar 07 23:50:26 2019">
|
||||
<application stringID="Xst" timeStamp="Wed May 22 23:50:11 2019">
|
||||
<section stringID="User_Env">
|
||||
<table stringID="User_EnvVar">
|
||||
<column stringID="variable"/>
|
||||
<column stringID="value"/>
|
||||
<row stringID="row" value="0">
|
||||
<item stringID="variable" value="Path"/>
|
||||
<item stringID="value" value="C:\Xilinx\14.7\ISE_DS\ISE\\lib\nt64;C:\Xilinx\14.7\ISE_DS\ISE\\bin\nt64;C:\Xilinx\14.7\ISE_DS\ISE\bin\nt64;C:\Xilinx\14.7\ISE_DS\ISE\lib\nt64;C:\Xilinx\14.7\ISE_DS\ISE\..\..\..\DocNav;C:\Xilinx\14.7\ISE_DS\PlanAhead\bin;C:\Xilinx\14.7\ISE_DS\EDK\bin\nt64;C:\Xilinx\14.7\ISE_DS\EDK\lib\nt64;C:\Xilinx\14.7\ISE_DS\EDK\gnu\microblaze\nt\bin;C:\Xilinx\14.7\ISE_DS\EDK\gnu\powerpc-eabi\nt\bin;C:\Xilinx\14.7\ISE_DS\EDK\gnuwin\bin;C:\Xilinx\14.7\ISE_DS\EDK\gnu\arm\nt\bin;C:\Xilinx\14.7\ISE_DS\EDK\gnu\microblaze\linux_toolchain\nt64_be\bin;C:\Xilinx\14.7\ISE_DS\EDK\gnu\microblaze\linux_toolchain\nt64_le\bin;C:\Xilinx\14.7\ISE_DS\common\bin\nt64;C:\Xilinx\14.7\ISE_DS\common\lib\nt64;C:\Program Files (x86)\Common Files\Oracle\Java\javapath;E:\ispLEVER_Classic2_0\ispcpld\bin;E:\ispLEVER_Classic2_0\ispFPGA\bin\nt;E:\ispLEVER_Classic2_0\active-hdl\BIN;C:\ProgramData\Oracle\Java\javapath;C:\SynaptiCAD\bin\win32;C:\Program Files\Java\jre7\bin;C\Windows\System32;C:\Program Files (x86)\WinAVR\bin;C:\Program Files (x86)\WinAVR\utils\bin;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\SSH Communications Security\SSH Secure Shell;C:\Program Files (x86)\UltraEdit;c:\Xilinx\14.6\ISE_DS\ISE\bin\nt64;C:\ispLever\ispcpld\bin;C:\ispLever\ispFPGA\bin\nt;C:\ispLever\active-hdl\BIN;C:\Program Files\WinRAR;C:\SynaptiCAD\bin;C:\Program Files (x86)\Windows Kits\8.1\Windows Performance Toolkit\;C:\Program Files\Microsoft SQL Server\110\Tools\Binn\;C:\Program Files (x86)\Microsoft SDKs\TypeScript\1.0\;C:\Program Files\Microsoft SQL Server\120\Tools\Binn\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\AMD\ATI.ACE\Core-Static;C:\Windows\System32\OpenSSH\;%PATH;C:\Users\Matze\Amiga\development\VBCC\bin;C:\Program Files (x86)\IDM Computer Solutions\UltraEdit\;C:\Program Files (x86)\UltraEdit\;C:\Program Files\Java\jdk1.7.0_02\bin;C:\Users\Matze\AppData\Local\Microsoft\WindowsApps;C:\Users\Matze\adb-fastboot\platform-tools"/>
|
||||
<item stringID="value" value="C:\Xilinx\14.7\ISE_DS\ISE\\lib\nt64;C:\Xilinx\14.7\ISE_DS\ISE\\bin\nt64;C:\Xilinx\14.7\ISE_DS\ISE\bin\nt64;C:\Xilinx\14.7\ISE_DS\ISE\lib\nt64;C:\Xilinx\14.7\ISE_DS\ISE\..\..\..\DocNav;C:\Xilinx\14.7\ISE_DS\PlanAhead\bin;C:\Xilinx\14.7\ISE_DS\EDK\bin\nt64;C:\Xilinx\14.7\ISE_DS\EDK\lib\nt64;C:\Xilinx\14.7\ISE_DS\EDK\gnu\microblaze\nt\bin;C:\Xilinx\14.7\ISE_DS\EDK\gnu\powerpc-eabi\nt\bin;C:\Xilinx\14.7\ISE_DS\EDK\gnuwin\bin;C:\Xilinx\14.7\ISE_DS\EDK\gnu\arm\nt\bin;C:\Xilinx\14.7\ISE_DS\EDK\gnu\microblaze\linux_toolchain\nt64_be\bin;C:\Xilinx\14.7\ISE_DS\EDK\gnu\microblaze\linux_toolchain\nt64_le\bin;C:\Xilinx\14.7\ISE_DS\common\bin\nt64;C:\Xilinx\14.7\ISE_DS\common\lib\nt64;C:\Program Files (x86)\WinAVR\bin;C:\Program Files (x86)\WinAVR\utils\bin;C:\Windows\System32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\Java\jre-10.0.2\bin;C:\Program Files (x86)\UltraEdit;%PATH;C:\Users\Matze\Amiga\development\VBCC\bin;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\IDM Computer Solutions\UltraEdit\;C:\Program Files (x86)\SSH Communications Security\SSH Secure Shell;C:\Program Files (x86)\UltraEdit\;C:\Program Files\Java\jdk1.7.0_02\bin;C:\Users\Matze\AppData\Local\Microsoft\WindowsApps;C:\Users\Matze\adb-fastboot\platform-tools"/>
|
||||
</row>
|
||||
<row stringID="row" value="1">
|
||||
<item stringID="variable" value="PATHEXT"/>
|
||||
|
||||
@@ -1,2 +1,2 @@
|
||||
C:\Users\Matze\Amiga\Hardwarehacks\Zorro-LAN-IDE\Logic\LAN_IDE\LAN_IDE_CP.ngc 1551999035
|
||||
C:\Users\Matze\Amiga\Hardwarehacks\Zorro-LAN-IDE\Logic\LAN_IDE\LAN_IDE_CP.ngc 1558561820
|
||||
OK
|
||||
|
||||
@@ -1,7 +1,7 @@
|
||||
<?xml version='1.0' encoding='UTF-8'?>
|
||||
<report-views version="2.0" >
|
||||
<header>
|
||||
<DateModified>2019-03-07T21:05:55</DateModified>
|
||||
<DateModified>2019-05-22T23:50:05</DateModified>
|
||||
<ModuleName>LAN_IDE_CP</ModuleName>
|
||||
<SummaryTimeStamp>2019-02-28T22:58:23</SummaryTimeStamp>
|
||||
<SavedFilePath>C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE/iseconfig/LAN_IDE_CP.xreport</SavedFilePath>
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
<!--The data in this file is primarily intended for consumption by Xilinx tools.
|
||||
The structure and the elements are likely to change over the next few releases.
|
||||
This means code written to parse this file will need to be revisited each subsequent release.-->
|
||||
<application name="pn" timeStamp="Thu Mar 07 23:50:25 2019">
|
||||
<application name="pn" timeStamp="Wed May 22 23:50:09 2019">
|
||||
<section name="Project Information" visible="false">
|
||||
<property name="ProjectID" value="A2E624B6ED1449CD92F77DE849BF7B51" type="project"/>
|
||||
<property name="ProjectIteration" value="0" type="project"/>
|
||||
|
||||
@@ -12,3 +12,87 @@ cpldfit -intstyle ise -p xc95288xl-10-TQ144 -ofmt vhdl -optimize speed -htmlrpt
|
||||
XSLTProcess LAN_IDE_CP_build.xml
|
||||
tsim -intstyle ise LAN_IDE_CP LAN_IDE_CP.nga
|
||||
hprep6 -s IEEE1149 -n LAN_IDE_CP -i LAN_IDE_CP
|
||||
xst -intstyle ise -ifn "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP.xst" -ofn "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP.syr"
|
||||
ngdbuild -intstyle ise -dd _ngo -uc pinlist.ucf -p xc95288xl-TQ144-10 LAN_IDE_CP.ngc LAN_IDE_CP.ngd
|
||||
cpldfit -intstyle ise -p xc95288xl-10-TQ144 -ofmt vhdl -optimize speed -htmlrpt -loc on -slew fast -init low -inputs 54 -pterms 25 -unused float -power std -terminate keeper LAN_IDE_CP.ngd
|
||||
XSLTProcess LAN_IDE_CP_build.xml
|
||||
tsim -intstyle ise LAN_IDE_CP LAN_IDE_CP.nga
|
||||
taengine -intstyle ise -f LAN_IDE_CP -w --format html1 -l LAN_IDE_CP_html/tim/timing_report.htm
|
||||
hprep6 -s IEEE1149 -n LAN_IDE_CP -i LAN_IDE_CP
|
||||
xst -intstyle ise -ifn "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP.xst" -ofn "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP.syr"
|
||||
ngdbuild -intstyle ise -dd _ngo -uc pinlist.ucf -p xc95288xl-TQ144-10 LAN_IDE_CP.ngc LAN_IDE_CP.ngd
|
||||
cpldfit -intstyle ise -p xc95288xl-10-TQ144 -ofmt vhdl -optimize speed -htmlrpt -loc on -slew fast -init low -inputs 54 -pterms 25 -unused float -power std -terminate keeper LAN_IDE_CP.ngd
|
||||
XSLTProcess LAN_IDE_CP_build.xml
|
||||
tsim -intstyle ise LAN_IDE_CP LAN_IDE_CP.nga
|
||||
hprep6 -s IEEE1149 -n LAN_IDE_CP -i LAN_IDE_CP
|
||||
xst -intstyle ise -ifn "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP.xst" -ofn "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP.syr"
|
||||
xst -intstyle ise -ifn "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP.xst" -ofn "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP.syr"
|
||||
ngdbuild -intstyle ise -dd _ngo -uc pinlist.ucf -p xc95288xl-TQ144-10 LAN_IDE_CP.ngc LAN_IDE_CP.ngd
|
||||
cpldfit -intstyle ise -p xc95288xl-10-TQ144 -ofmt vhdl -optimize speed -htmlrpt -loc on -slew fast -init low -inputs 54 -pterms 25 -unused float -power std -terminate keeper LAN_IDE_CP.ngd
|
||||
XSLTProcess LAN_IDE_CP_build.xml
|
||||
xst -intstyle ise -ifn "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP.xst" -ofn "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP.syr"
|
||||
ngdbuild -intstyle ise -dd _ngo -uc pinlist.ucf -p xc95288xl-TQ144-10 LAN_IDE_CP.ngc LAN_IDE_CP.ngd
|
||||
cpldfit -intstyle ise -p xc95288xl-10-TQ144 -ofmt vhdl -optimize speed -htmlrpt -loc on -slew fast -init low -inputs 54 -pterms 25 -unused float -power std -terminate keeper LAN_IDE_CP.ngd
|
||||
XSLTProcess LAN_IDE_CP_build.xml
|
||||
tsim -intstyle ise LAN_IDE_CP LAN_IDE_CP.nga
|
||||
hprep6 -s IEEE1149 -n LAN_IDE_CP -i LAN_IDE_CP
|
||||
xst -intstyle ise -ifn "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP.xst" -ofn "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP.syr"
|
||||
ngdbuild -intstyle ise -dd _ngo -uc pinlist.ucf -p xc95288xl-TQ144-10 LAN_IDE_CP.ngc LAN_IDE_CP.ngd
|
||||
cpldfit -intstyle ise -p xc95288xl-10-TQ144 -ofmt vhdl -optimize speed -htmlrpt -loc on -slew fast -init low -inputs 54 -pterms 25 -unused float -power std -terminate keeper LAN_IDE_CP.ngd
|
||||
XSLTProcess LAN_IDE_CP_build.xml
|
||||
tsim -intstyle ise LAN_IDE_CP LAN_IDE_CP.nga
|
||||
hprep6 -s IEEE1149 -n LAN_IDE_CP -i LAN_IDE_CP
|
||||
xst -intstyle ise -ifn "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP.xst" -ofn "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP.syr"
|
||||
ngdbuild -intstyle ise -dd _ngo -uc pinlist.ucf -p xc95288xl-TQ144-10 LAN_IDE_CP.ngc LAN_IDE_CP.ngd
|
||||
cpldfit -intstyle ise -p xc95288xl-10-TQ144 -ofmt vhdl -optimize speed -htmlrpt -loc on -slew fast -init low -inputs 54 -pterms 25 -unused float -power std -terminate keeper LAN_IDE_CP.ngd
|
||||
XSLTProcess LAN_IDE_CP_build.xml
|
||||
tsim -intstyle ise LAN_IDE_CP LAN_IDE_CP.nga
|
||||
hprep6 -s IEEE1149 -n LAN_IDE_CP -i LAN_IDE_CP
|
||||
xst -intstyle ise -ifn "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP.xst" -ofn "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP.syr"
|
||||
ngdbuild -intstyle ise -dd _ngo -uc pinlist.ucf -p xc95288xl-TQ144-10 LAN_IDE_CP.ngc LAN_IDE_CP.ngd
|
||||
cpldfit -intstyle ise -p xc95288xl-10-TQ144 -ofmt vhdl -optimize speed -htmlrpt -loc on -slew fast -init low -inputs 54 -pterms 25 -unused float -power std -terminate keeper LAN_IDE_CP.ngd
|
||||
XSLTProcess LAN_IDE_CP_build.xml
|
||||
tsim -intstyle ise LAN_IDE_CP LAN_IDE_CP.nga
|
||||
hprep6 -s IEEE1149 -n LAN_IDE_CP -i LAN_IDE_CP
|
||||
xst -intstyle ise -ifn "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP.xst" -ofn "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP.syr"
|
||||
ngdbuild -intstyle ise -dd _ngo -uc pinlist.ucf -p xc95288xl-TQ144-10 LAN_IDE_CP.ngc LAN_IDE_CP.ngd
|
||||
cpldfit -intstyle ise -p xc95288xl-10-TQ144 -ofmt vhdl -optimize speed -htmlrpt -loc on -slew fast -init low -inputs 54 -pterms 25 -unused float -power std -terminate keeper LAN_IDE_CP.ngd
|
||||
XSLTProcess LAN_IDE_CP_build.xml
|
||||
tsim -intstyle ise LAN_IDE_CP LAN_IDE_CP.nga
|
||||
hprep6 -s IEEE1149 -n LAN_IDE_CP -i LAN_IDE_CP
|
||||
xst -intstyle ise -ifn "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP.xst" -ofn "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP.syr"
|
||||
ngdbuild -intstyle ise -dd _ngo -uc pinlist.ucf -p xc95288xl-TQ144-10 LAN_IDE_CP.ngc LAN_IDE_CP.ngd
|
||||
cpldfit -intstyle ise -p xc95288xl-10-TQ144 -ofmt vhdl -optimize speed -htmlrpt -loc on -slew fast -init low -inputs 54 -pterms 25 -unused float -power std -terminate keeper LAN_IDE_CP.ngd
|
||||
XSLTProcess LAN_IDE_CP_build.xml
|
||||
tsim -intstyle ise LAN_IDE_CP LAN_IDE_CP.nga
|
||||
hprep6 -s IEEE1149 -n LAN_IDE_CP -i LAN_IDE_CP
|
||||
xst -intstyle ise -ifn "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP.xst" -ofn "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP.syr"
|
||||
ngdbuild -intstyle ise -dd _ngo -uc pinlist.ucf -p xc95288xl-TQ144-10 LAN_IDE_CP.ngc LAN_IDE_CP.ngd
|
||||
cpldfit -intstyle ise -p xc95288xl-10-TQ144 -ofmt vhdl -optimize speed -htmlrpt -loc on -slew fast -init low -inputs 54 -pterms 25 -unused float -power std -terminate keeper LAN_IDE_CP.ngd
|
||||
XSLTProcess LAN_IDE_CP_build.xml
|
||||
tsim -intstyle ise LAN_IDE_CP LAN_IDE_CP.nga
|
||||
hprep6 -s IEEE1149 -n LAN_IDE_CP -i LAN_IDE_CP
|
||||
xst -intstyle ise -ifn "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP.xst" -ofn "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP.syr"
|
||||
ngdbuild -intstyle ise -dd _ngo -uc pinlist.ucf -p xc95288xl-TQ144-10 LAN_IDE_CP.ngc LAN_IDE_CP.ngd
|
||||
cpldfit -intstyle ise -p xc95288xl-10-TQ144 -ofmt vhdl -optimize speed -htmlrpt -loc on -slew fast -init low -inputs 54 -pterms 25 -unused float -power std -terminate keeper LAN_IDE_CP.ngd
|
||||
XSLTProcess LAN_IDE_CP_build.xml
|
||||
tsim -intstyle ise LAN_IDE_CP LAN_IDE_CP.nga
|
||||
hprep6 -s IEEE1149 -n LAN_IDE_CP -i LAN_IDE_CP
|
||||
xst -intstyle ise -ifn "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP.xst" -ofn "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP.syr"
|
||||
ngdbuild -intstyle ise -dd _ngo -uc pinlist.ucf -p xc95288xl-TQ144-10 LAN_IDE_CP.ngc LAN_IDE_CP.ngd
|
||||
cpldfit -intstyle ise -p xc95288xl-10-TQ144 -ofmt vhdl -optimize speed -htmlrpt -loc on -slew fast -init low -inputs 54 -pterms 25 -unused float -power std -terminate keeper LAN_IDE_CP.ngd
|
||||
XSLTProcess LAN_IDE_CP_build.xml
|
||||
tsim -intstyle ise LAN_IDE_CP LAN_IDE_CP.nga
|
||||
hprep6 -s IEEE1149 -n LAN_IDE_CP -i LAN_IDE_CP
|
||||
xst -intstyle ise -ifn "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP.xst" -ofn "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP.syr"
|
||||
ngdbuild -intstyle ise -dd _ngo -uc pinlist.ucf -p xc95288xl-TQ144-10 LAN_IDE_CP.ngc LAN_IDE_CP.ngd
|
||||
cpldfit -intstyle ise -p xc95288xl-10-TQ144 -ofmt vhdl -optimize speed -htmlrpt -loc on -slew fast -init low -inputs 54 -pterms 25 -unused float -power std -terminate keeper LAN_IDE_CP.ngd
|
||||
XSLTProcess LAN_IDE_CP_build.xml
|
||||
tsim -intstyle ise LAN_IDE_CP LAN_IDE_CP.nga
|
||||
hprep6 -s IEEE1149 -n LAN_IDE_CP -i LAN_IDE_CP
|
||||
xst -intstyle ise -ifn "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP.xst" -ofn "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP.syr"
|
||||
ngdbuild -intstyle ise -dd _ngo -uc pinlist.ucf -p xc95288xl-TQ144-10 LAN_IDE_CP.ngc LAN_IDE_CP.ngd
|
||||
cpldfit -intstyle ise -p xc95288xl-10-TQ144 -ofmt vhdl -optimize speed -htmlrpt -loc on -slew fast -init low -inputs 54 -pterms 25 -unused float -power std -terminate keeper LAN_IDE_CP.ngd
|
||||
XSLTProcess LAN_IDE_CP_build.xml
|
||||
tsim -intstyle ise LAN_IDE_CP LAN_IDE_CP.nga
|
||||
hprep6 -s IEEE1149 -n LAN_IDE_CP -i LAN_IDE_CP
|
||||
|
||||
+105
-104
@@ -3,41 +3,28 @@ Pin Freeze File: version P.20131013
|
||||
95288XL144 XC95288XL-10-TQ144
|
||||
AS S:PIN80
|
||||
AUTOBOOT_OFF S:PIN75
|
||||
A<12> S:PIN61
|
||||
A<13> S:PIN64
|
||||
A<14> S:PIN66
|
||||
A<15> S:PIN74
|
||||
A<16> S:PIN97
|
||||
A<17> S:PIN95
|
||||
A<18> S:PIN94
|
||||
A<19> S:PIN92
|
||||
A<1> S:PIN57
|
||||
A<20> S:PIN91
|
||||
A<21> S:PIN88
|
||||
A<22> S:PIN87
|
||||
A<23> S:PIN86
|
||||
A<2> S:PIN54
|
||||
A<3> S:PIN52
|
||||
A<4> S:PIN50
|
||||
A<5> S:PIN49
|
||||
A<6> S:PIN51
|
||||
A<7> S:PIN53
|
||||
A<8> S:PIN56
|
||||
BERR S:PIN98
|
||||
C1 S:PIN103
|
||||
C3 S:PIN102
|
||||
CFIN S:PIN104
|
||||
CLK_EXT S:PIN30
|
||||
CP_IRQ S:PIN31
|
||||
A<9> S:PIN58
|
||||
A<10> S:PIN59
|
||||
A<11> S:PIN60
|
||||
IDE_WAIT S:PIN33
|
||||
DS0 S:PIN93
|
||||
DS1 S:PIN78
|
||||
FCS S:PIN77
|
||||
LAN_INT S:PIN111
|
||||
LDS S:PIN82
|
||||
MTCR S:PIN101
|
||||
RESET S:PIN143
|
||||
RW S:PIN83
|
||||
UDS S:PIN81
|
||||
Z3 S:PIN79
|
||||
A_LAN<0> S:PIN4
|
||||
A_LAN<10> S:PIN138
|
||||
A_LAN<11> S:PIN139
|
||||
@@ -57,6 +44,7 @@ CP_CS S:PIN34
|
||||
CP_RD S:PIN71
|
||||
CP_WE S:PIN70
|
||||
DQ<0> S:PIN118
|
||||
DQ<10> S:PIN129
|
||||
DQ<11> S:PIN115
|
||||
DQ<12> S:PIN130
|
||||
DQ<13> S:PIN113
|
||||
@@ -64,6 +52,11 @@ DQ<14> S:PIN131
|
||||
DQ<15> S:PIN112
|
||||
DQ<1> S:PIN117
|
||||
DQ<2> S:PIN120
|
||||
DQ<3> S:PIN119
|
||||
DQ<5> S:PIN121
|
||||
DQ<6> S:PIN126
|
||||
DQ<7> S:PIN125
|
||||
DQ<9> S:PIN116
|
||||
D<0> S:PIN2
|
||||
D<10> S:PIN41
|
||||
D<11> S:PIN43
|
||||
@@ -87,111 +80,119 @@ IDE_CS<0> S:PIN22
|
||||
IDE_CS<1> S:PIN23
|
||||
IDE_R S:PIN27
|
||||
IDE_W S:PIN28
|
||||
LAN_CFG<2> S:PIN135
|
||||
LAN_CS S:PIN133
|
||||
LAN_RD S:PIN134
|
||||
LAN_WRH S:PIN132
|
||||
LAN_WRL S:PIN76
|
||||
ROM_B<1> S:PIN69
|
||||
ROM_B<0> S:PIN77
|
||||
ROM_B<0> S:PIN68
|
||||
OWN S:PIN107
|
||||
OVR S:PIN100
|
||||
MTACK S:PIN96
|
||||
LAN_CFG<4> S:PIN110
|
||||
LAN_CFG<3> S:PIN13
|
||||
LAN_CFG<1> S:PIN12
|
||||
INT6_OUT S:PIN68
|
||||
INT6_OUT S:PIN135
|
||||
INT2_OUT S:PIN32
|
||||
DTACK S:PIN85
|
||||
ROM_OE S:PIN35
|
||||
SLAVE S:PIN106
|
||||
A<8> S:PIN56
|
||||
A<9> S:PIN58
|
||||
A<10> S:PIN59
|
||||
A<11> S:PIN60
|
||||
A<12> S:PIN61
|
||||
A<13> S:PIN64
|
||||
A<14> S:PIN66
|
||||
A<15> S:PIN74
|
||||
A<16> S:PIN97
|
||||
A<17> S:PIN95
|
||||
A<18> S:PIN94
|
||||
A<19> S:PIN92
|
||||
A<20> S:PIN91
|
||||
A<21> S:PIN88
|
||||
A<22> S:PIN87
|
||||
A<23> S:PIN86
|
||||
DQ<8> S:PIN128
|
||||
DQ<4> S:PIN124
|
||||
DQ<10> S:PIN129
|
||||
DQ<7> S:PIN125
|
||||
DQ<6> S:PIN126
|
||||
DQ<5> S:PIN121
|
||||
DQ<3> S:PIN119
|
||||
DQ<9> S:PIN116
|
||||
|
||||
|
||||
;The remaining section of the .gyd file is for documentation purposes only.
|
||||
;It shows where your internal equations were placed in the last successful fit.
|
||||
|
||||
PARTITION FB1_1 ROM_OE_S LAN_RST_SM_FSM_FFd3 LAN_RST_SM_FSM_FFd2 LAN_RST_SM_FSM_FFd1
|
||||
D_5_IOBUFE D_4_IOBUFE LAN_CS_RST IDE_CS_0_OBUF
|
||||
IDE_W_S IDE_CS_1_OBUF IDE_ENABLE IDE_A_0_OBUF$BUF0
|
||||
DS_D IDE_A_2_OBUF$BUF0 IDE_A_1_OBUF$BUF0 CP_WE_S
|
||||
IDE_R_OBUF DQ<7>_BUFR.MC
|
||||
PARTITION FB2_1 DQ<10>_BUFR.MC A_LAN_4_OBUF A_LAN_7_OBUF
|
||||
PARTITION FB2_5 A_LAN_6_OBUF ROM_B_0_OBUF$BUF6
|
||||
PARTITION FB2_8 ROM_B_0_OBUF$BUF5
|
||||
PARTITION FB2_10 D_6_IOBUFE
|
||||
PARTITION FB2_12 D_3_IOBUFE $OpTx$INV$87__$INT D_7_IOBUFE D_1_IOBUFE
|
||||
DQ_9_IOBUFE/DQ_9_IOBUFE_TRST D_8_IOBUFE EXP30_
|
||||
PARTITION FB3_1 EXP31_ IDE_W_OBUF EXP32_ EXP33_
|
||||
EXP34_ BUF_cp EXP35_
|
||||
PARTITION FB3_10 EXP36_ EXP37_ lancp EXP38_
|
||||
ROM_B_0_OBUF$BUF8 autoconfig CP_WE_QUIRK EXP39_
|
||||
ide
|
||||
PARTITION FB4_2 D_0_IOBUFE
|
||||
PARTITION FB4_5 A_LAN_1_OBUF A_LAN_0_OBUF
|
||||
PARTITION FB4_8 A_LAN_3_OBUF
|
||||
PARTITION FB4_12 A_LAN_2_OBUF
|
||||
PARTITION FB4_14 A_LAN_5_OBUF SHUT_UP<0> LAN_BASEADR<1> IDE_BASEADR<1>
|
||||
CP_BASEADR<1>
|
||||
PARTITION FB5_1 EXP40_ CP_CS_OBUF EXP41_ EXP42_
|
||||
ROM_OE_OBUF
|
||||
PARTITION FB5_10 D_2_IOBUFE
|
||||
PARTITION FB5_12 D_9_IOBUFE
|
||||
PARTITION FB5_14 D_10_IOBUFE D_11_IOBUFE EXP43_ D_12_IOBUFE
|
||||
EXP44_
|
||||
PARTITION FB6_1 EXP45_ LAN_CFG_2_OBUF A_LAN_12_OBUF
|
||||
PARTITION FB1_4 SHUT_UP_Z2<1> D_5_IOBUFE D_4_IOBUFE AUTO_CONFIG_Z2_DONE_CYCLE<2>
|
||||
IDE_CS_0_OBUF AUTO_CONFIG_Z2_DONE<1> IDE_CS_1_OBUF LAN_BASEADR<9>
|
||||
IDE_A_0_OBUF$BUF0 LAN_BASEADR<8> IDE_A_2_OBUF$BUF0 IDE_A_1_OBUF$BUF0
|
||||
LAN_BASEADR<15> IDE_R_OBUF LAN_BASEADR<13>
|
||||
PARTITION FB2_1 D_Z2_OUT<1> A_LAN_4_OBUF A_LAN_7_OBUF IDE_BASEADR<4>
|
||||
A_LAN_6_OBUF IDE_BASEADR<3> IDE_BASEADR<2> IDE_BASEADR<1>
|
||||
EXP24_ D_6_IOBUFE IDE_BASEADR<0> D_3_IOBUFE
|
||||
EXP25_ D_7_IOBUFE D_1_IOBUFE EXP26_
|
||||
D_8_IOBUFE EXP27_
|
||||
PARTITION FB3_2 IDE_W_OBUF
|
||||
PARTITION FB3_13 LAN_D_INIT<8> ROM_B_0_OBUF$BUF5 LAN_D_INIT<1> LAN_A_INIT<6>
|
||||
CP_WE_S/CP_WE_S_CLKF CP_WE_QUIRK
|
||||
PARTITION FB4_1 SHUT_UP_Z2<2> D_0_IOBUFE LAN_BASEADR<14> LAN_BASEADR<12>
|
||||
A_LAN_1_OBUF A_LAN_0_OBUF LAN_BASEADR<11> A_LAN_3_OBUF
|
||||
LAN_BASEADR<10> IDE_BASEADR<7> CP_BASEADR<7> A_LAN_2_OBUF
|
||||
CP_BASEADR<6> A_LAN_5_OBUF CP_BASEADR<4> CP_BASEADR<3>
|
||||
CP_BASEADR<2> CP_BASEADR<1>
|
||||
PARTITION FB5_1 LAN_A_INIT<3> CP_CS_OBUF EXP28_ EXP29_
|
||||
ROM_OE_OBUF IDE_W_S IDE_ENABLE AS_D1
|
||||
AS_D0 D_2_IOBUFE D_8_IOBUFE/D_8_IOBUFE_TRST D_9_IOBUFE
|
||||
AUTOCONFIG_Z2_ACCESS D_10_IOBUFE D_11_IOBUFE EXP30_
|
||||
D_12_IOBUFE EXP31_
|
||||
PARTITION FB6_1 EXP32_ ROM_B_0_OBUF$BUF4 A_LAN_12_OBUF
|
||||
PARTITION FB6_5 A_LAN_13_OBUF A_LAN_10_OBUF
|
||||
PARTITION FB6_8 A_LAN_11_OBUF
|
||||
PARTITION FB6_10 A_LAN_8_OBUF EXP46_ lan_adr EXP47_
|
||||
A_LAN_9_OBUF EXP48_ EXP49_ lan_adr_sw
|
||||
EXP50_
|
||||
PARTITION FB7_1 Dout1<1> EXP51_ D_13_IOBUFE EXP52_
|
||||
D_14_IOBUFE EXP53_ EXP54_ EXP55_
|
||||
Dout1<2> EXP56_ EXP57_ D_15_IOBUFE
|
||||
EXP58_ EXP59_ Dout1<0> EXP60_
|
||||
EXP61_ EXP62_
|
||||
PARTITION FB8_1 EXP63_ DQ_12_IOBUFE DQ_14_IOBUFE EXP64_
|
||||
LAN_WRH_OBUF DQ<6>_BUFR.MC EXP65_ LAN_CS_OBUF
|
||||
EXP66_ LAN_RD_OBUF LAN_INT_ENABLE EXP67_
|
||||
EXP68_ DQ<9>_BUFR.MC DQ<4>_BUFR.MC EXP69_
|
||||
LAN_RD_S EXP70_
|
||||
PARTITION FB9_1 EXP71_ $OpTx$FX_DC$144 EXP72_ EXP73_
|
||||
|
||||
PARTITION FB9_15 EXP74_ EXP75_ $OpTx$FX_DC$145 EXP76_
|
||||
|
||||
PARTITION FB10_1 EXP77_ DQ_1_IOBUFE DQ_0_IOBUFE EXP78_
|
||||
_24_ DQ_2_IOBUFE EXP79_ _23_
|
||||
EXP80_ _19_ _21_ _22_
|
||||
|
||||
PARTITION FB10_14 _18_ DQ<8>_BUFR.MC EXP81_ _20_
|
||||
EXP82_
|
||||
PARTITION FB11_8 SHUT_UP<1> LAN_BASEADR<7> LAN_BASEADR<6> LAN_BASEADR<5>
|
||||
ROM_B_0_OBUF$BUF7 IDE_BASEADR<7> ROM_B_0_OBUF IDE_BASEADR<6>
|
||||
CP_BASEADR<7> CP_WE_OBUF CP_BASEADR<6>
|
||||
PARTITION FB12_1 EXP83_ ROM_B_0_OBUF$BUF4 EXP84_ EXP85_
|
||||
DQ_15_IOBUFE LAN_WRL_S EXP86_ DQ_13_IOBUFE
|
||||
LAN_WRH_S DQ_11_IOBUFE EXP87_ _25_
|
||||
IDE_R_S LAN_IRQ_OUT CP_RD_S DQ<3>_BUFR.MC
|
||||
EXP88_ DQ<5>_BUFR.MC
|
||||
PARTITION FB13_2 CP_RD_OBUF
|
||||
PARTITION FB13_9 LAN_BASEADR<4> LAN_BASEADR<3> IDE_BASEADR<5> IDE_BASEADR<4>
|
||||
IDE_BASEADR<3> LAN_WRL_OBUF ROM_B_0_OBUF$BUF0 CP_BASEADR<5>
|
||||
CP_BASEADR<4> CP_BASEADR<3>
|
||||
PARTITION FB14_1 AUTO_CONFIG_DONE_CYCLE<0> EXP89_ ROM_B_0_OBUF$BUF2
|
||||
PARTITION FB14_6 AUTO_CONFIG_DONE<1> AUTO_CONFIG_DONE<0> LAN_BASEADR<2> LAN_BASEADR<0>
|
||||
IDE_BASEADR<2> CFOUT_OBUF IDE_BASEADR<0> CP_BASEADR<2>
|
||||
SLAVE_OBUF ROM_B_0_OBUF$BUF1 CP_BASEADR<0> EXP90_
|
||||
AUTO_CONFIG_DONE_CYCLE<1>
|
||||
PARTITION FB15_1 Dout1<3> EXP91_
|
||||
PARTITION FB15_12 ROM_B_0_OBUF$BUF9 lancp/lancp_RSTF__$INT LAN_WR_RST SHUT_UP<2>/SHUT_UP<2>_CLKF
|
||||
LAN_IRQ_D0 SHUT_UP<2> EXP92_
|
||||
PARTITION FB16_10 ROM_B_0_OBUF$BUF3
|
||||
|
||||
PARTITION FB6_10 A_LAN_8_OBUF EXP33_ EXP34_ DQ_DATA<3>
|
||||
A_LAN_9_OBUF EXP35_ DQ_DATA<11> EXP36_
|
||||
IDE_ACCESS
|
||||
PARTITION FB7_1 EXP37_ EXP38_ D_13_IOBUFE EXP39_
|
||||
D_14_IOBUFE DQ_9_IOBUFE/DQ_9_IOBUFE_TRST CP_BASEADR<0> CP_BASEADR<5>
|
||||
IDE_BASEADR<5> IDE_BASEADR<6> EXP40_ D_15_IOBUFE
|
||||
LAN_SM_RST EXP41_ D_Z2_OUT<2> EXP42_
|
||||
EXP43_ DQ<8>_BUFR.MC
|
||||
PARTITION FB8_1 DQ_DATA<12> DQ_12_IOBUFE DQ_14_IOBUFE EXP44_
|
||||
LAN_WRH_OBUF EXP45_ LAN_SM_FSM_FFd4 LAN_CS_OBUF
|
||||
DQ_DATA<6> LAN_RD_OBUF LAN_WRH_S DQ_DATA<14>
|
||||
EXP46_ DQ_DATA<4> EXP47_ EXP48_
|
||||
EXP49_ EXP50_
|
||||
PARTITION FB9_1 AUTO_CONFIG_Z2_DONE<0> EXP51_ D_Z2_OUT<3> AUTO_CONFIG_Z2_DONE_CYCLE<0>
|
||||
INT_VECTOR_CYCLE Z3_ADR<10> Z3_ADR<13> Z3_ADR<2>
|
||||
Z3_ADR<3> Z3_ADR<4> Z3_DATA<0> Z3_ADR<5>
|
||||
Z3_ADR<6> Z3_DATA<1> Z3_ADR<7> Z3_ADR_0
|
||||
Z3_DATA<2> Z3_ADR_1
|
||||
PARTITION FB10_1 DQ<4>_BUFR.MC DQ_1_IOBUFE DQ_0_IOBUFE EXP52_
|
||||
DQ_3_IOBUFE DQ_2_IOBUFE EXP53_ DQ_5_IOBUFE
|
||||
EXP54_ _19_ DQ_7_IOBUFE DQ_6_IOBUFE
|
||||
EXP55_ _18_ EXP56_ EXP57_
|
||||
DQ_10_IOBUFE EXP58_
|
||||
PARTITION FB11_1 Z3_DATA<30> Z3_DATA<29> Z3_DATA<3> Z3_DATA<28>
|
||||
Z3_DATA<4> Z3_DATA<27> Z3_DATA<22> Z3_DATA<21>
|
||||
Z3_DATA<20> Z3_DATA<5> Z3_DATA<6> ROM_B_0_OBUF$BUF0
|
||||
Z3_DATA<19> ROM_B_0_OBUF EXP59_ DQ_DATA<8>
|
||||
CP_WE_OBUF DQ_DATA<0>
|
||||
PARTITION FB12_1 EXP60_ EXP61_ LAN_ACCESS EXP62_
|
||||
DQ_15_IOBUFE EXP63_ Z3_ADR<11> DQ_13_IOBUFE
|
||||
Z3_ADR<12> DQ_11_IOBUFE EXP64_ DQ_9_IOBUFE
|
||||
EXP65_ EXP66_ EXP67_ DQ_SWAP
|
||||
EXP68_ EXP69_
|
||||
PARTITION FB13_1 EXP70_ CP_RD_OBUF Z3_DATA<31> Z3_DATA<23>
|
||||
LAN_INT_ENABLE EXP71_ DQ_DATA<7> Z3_DATA<7>
|
||||
EXP72_ EXP73_ DQ_DATA<5> DQ_DATA<1>
|
||||
EXP74_ LAN_WRL_OBUF EXP75_ DQ_DATA<13>
|
||||
LAN_WRL_S DQ_DATA<15>
|
||||
PARTITION FB14_1 ROM_OE_S LAN_WR_RST ROM_B_0_OBUF$BUF2 LAN_RST_SM_FSM_FFd1
|
||||
LAN_IRQ_D0 LAN_CS_RST IDE_R_S Z3_ADR<9>
|
||||
Z3_ADR<8> LAN_RST_SM_FSM_FFd3 CFOUT_OBUF LAN_RST_SM_FSM_FFd2
|
||||
LAN_IRQ_OUT SLAVE_OBUF ROM_B_0_OBUF$BUF1 CP_WE_S
|
||||
CP_RD_S AUTO_CONFIG_Z2_DONE<2>
|
||||
PARTITION FB15_1 EXP76_ EXP77_ SHUT_UP_Z2<0> AUTO_CONFIG_Z2_DONE_CYCLE<1>
|
||||
LAN_SM_FSM_FFd1 LAN_RD_S LAN_SM_FSM_FFd3 EXP78_
|
||||
LAN_READY DQ_DATA<9> EXP79_ ROM_B_0_OBUF$BUF6
|
||||
Z3_A_LOW Z3_DATA<15> Z3_DATA<14> LAN_SM_FSM_FFd2
|
||||
Z3_DATA<13> D_Z2_OUT<0>
|
||||
PARTITION FB16_1 EXP80_ Z3_DATA<12> Z3_DATA<11>
|
||||
PARTITION FB16_5 Z3_DATA<26> Z3_DATA<10> Z3_DATA<25> Z3_DATA<9>
|
||||
Z3_DATA<24> ROM_B_0_OBUF$BUF3 Z3_DATA<8> Z3_DATA<18>
|
||||
Z3_DATA<17> Z3_DATA<16> EXP81_ DQ_DATA<10>
|
||||
DQ_DATA<2> EXP82_
|
||||
|
||||
|
||||
+1488
-1488
File diff suppressed because it is too large
Load Diff
+5206
-4008
File diff suppressed because it is too large
Load Diff
File diff suppressed because one or more lines are too long
File diff suppressed because one or more lines are too long
@@ -1,7 +1,7 @@
|
||||
Release 8.1i - Fit P.20131013
|
||||
Copyright(c) 1995-2003 Xilinx Inc. All rights reserved
|
||||
|
||||
3- 2-2019 7:56PM
|
||||
11-15-2019 0:25AM
|
||||
|
||||
NOTE: This file is designed to be imported into a spreadsheet program
|
||||
such as Microsoft Excel for viewing, printing and sorting. The pipe '|'
|
||||
@@ -29,8 +29,8 @@ P8|VCC||VCCINT||||||||||
|
||||
P9|A_LAN<4>|O|I/O|OUTPUT|||||||||
|
||||
P10|A_LAN<7>|O|I/O|OUTPUT|||||||||
|
||||
P11|A_LAN<6>|O|I/O|OUTPUT|||||||||
|
||||
P12|LAN_CFG<1>|O|I/O|OUTPUT|||||||||
|
||||
P13|LAN_CFG<3>|O|I/O|OUTPUT|||||||||
|
||||
P12|TIE||I/O||||||||||
|
||||
P13|TIE||I/O||||||||||
|
||||
P14|D<6>|I/O|I/O|BIDIR|||||||||
|
||||
P15|D<3>|I/O|I/O|BIDIR|||||||||
|
||||
P16|D<7>|I/O|I/O|BIDIR|||||||||
|
||||
@@ -50,7 +50,7 @@ P29|GND||GND||||||||||
|
||||
P30|CLK_EXT|GCK|I/O/GCK1||||||||||
|
||||
P31|CP_IRQ|I|I/O|INPUT|||||||||
|
||||
P32|INT2_OUT|O|I/O/GCK2|OUTPUT|||||||||
|
||||
P33|IDE_WAIT|I|I/O|INPUT|||||||||
|
||||
P33|TIE||I/O||||||||||
|
||||
P34|CP_CS|O|I/O|OUTPUT|||||||||
|
||||
P35|ROM_OE|O|I/O|OUTPUT|||||||||
|
||||
P36|GND||GND||||||||||
|
||||
@@ -73,52 +73,52 @@ P52|A<3>|I|I/O|INPUT|||||||||
|
||||
P53|A<7>|I|I/O|INPUT|||||||||
|
||||
P54|A<2>|I|I/O|INPUT|||||||||
|
||||
P55|VCC||VCCIO||||||||||
|
||||
P56|A<8>|I|I/O|INPUT|||||||||
|
||||
P56|A<8>|I/O|I/O|BIDIR|||||||||
|
||||
P57|A<1>|I|I/O|INPUT|||||||||
|
||||
P58|A<9>|I|I/O|INPUT|||||||||
|
||||
P59|A<10>|I|I/O|INPUT|||||||||
|
||||
P60|A<11>|I|I/O|INPUT|||||||||
|
||||
P61|A<12>|I|I/O|INPUT|||||||||
|
||||
P58|A<9>|I/O|I/O|BIDIR|||||||||
|
||||
P59|A<10>|I/O|I/O|BIDIR|||||||||
|
||||
P60|A<11>|I/O|I/O|BIDIR|||||||||
|
||||
P61|A<12>|I/O|I/O|BIDIR|||||||||
|
||||
P62|GND||GND||||||||||
|
||||
P63|TDI||TDI||||||||||
|
||||
P64|A<13>|I|I/O|INPUT|||||||||
|
||||
P64|A<13>|I/O|I/O|BIDIR|||||||||
|
||||
P65|TMS||TMS||||||||||
|
||||
P66|A<14>|I|I/O|INPUT|||||||||
|
||||
P66|A<14>|I/O|I/O|BIDIR|||||||||
|
||||
P67|TCK||TCK||||||||||
|
||||
P68|INT6_OUT|O|I/O|OUTPUT|||||||||
|
||||
P68|ROM_B<0>|O|I/O|OUTPUT|||||||||
|
||||
P69|ROM_B<1>|O|I/O|OUTPUT|||||||||
|
||||
P70|CP_WE|O|I/O|OUTPUT|||||||||
|
||||
P71|CP_RD|O|I/O|OUTPUT|||||||||
|
||||
P72|GND||GND||||||||||
|
||||
P73|VCC||VCCIO||||||||||
|
||||
P74|A<15>|I|I/O|INPUT|||||||||
|
||||
P74|A<15>|I/O|I/O|BIDIR|||||||||
|
||||
P75|AUTOBOOT_OFF|I|I/O|INPUT|||||||||
|
||||
P76|LAN_WRL|O|I/O|OUTPUT|||||||||
|
||||
P77|ROM_B<0>|O|I/O|OUTPUT|||||||||
|
||||
P78|TIE||I/O||||||||||
|
||||
P79|TIE||I/O||||||||||
|
||||
P77|FCS|I|I/O|INPUT|||||||||
|
||||
P78|DS1|I|I/O|INPUT|||||||||
|
||||
P79|Z3|I|I/O|INPUT|||||||||
|
||||
P80|AS|I|I/O|INPUT|||||||||
|
||||
P81|UDS|I|I/O|INPUT|||||||||
|
||||
P82|LDS|I|I/O|INPUT|||||||||
|
||||
P83|RW|I|I/O|INPUT|||||||||
|
||||
P84|VCC||VCCINT||||||||||
|
||||
P85|DTACK|O|I/O|OUTPUT|||||||||
|
||||
P86|A<23>|I|I/O|INPUT|||||||||
|
||||
P87|A<22>|I|I/O|INPUT|||||||||
|
||||
P88|A<21>|I|I/O|INPUT|||||||||
|
||||
P86|A<23>|I/O|I/O|BIDIR|||||||||
|
||||
P87|A<22>|I/O|I/O|BIDIR|||||||||
|
||||
P88|A<21>|I/O|I/O|BIDIR|||||||||
|
||||
P89|GND||GND||||||||||
|
||||
P90|GND||GND||||||||||
|
||||
P91|A<20>|I|I/O|INPUT|||||||||
|
||||
P92|A<19>|I|I/O|INPUT|||||||||
|
||||
P93|TIE||I/O||||||||||
|
||||
P94|A<18>|I|I/O|INPUT|||||||||
|
||||
P95|A<17>|I|I/O|INPUT|||||||||
|
||||
P91|A<20>|I/O|I/O|BIDIR|||||||||
|
||||
P92|A<19>|I/O|I/O|BIDIR|||||||||
|
||||
P93|DS0|I|I/O|INPUT|||||||||
|
||||
P94|A<18>|I/O|I/O|BIDIR|||||||||
|
||||
P95|A<17>|I/O|I/O|BIDIR|||||||||
|
||||
P96|MTACK|O|I/O|OUTPUT|||||||||
|
||||
P97|A<16>|I|I/O|INPUT|||||||||
|
||||
P98|BERR|I|I/O|INPUT|||||||||
|
||||
P97|A<16>|I/O|I/O|BIDIR|||||||||
|
||||
P98|TIE||I/O||||||||||
|
||||
P99|GND||GND||||||||||
|
||||
P100|OVR|O|I/O|OUTPUT|||||||||
|
||||
P101|TIE||I/O||||||||||
|
||||
P101|MTCR|I|I/O|INPUT|||||||||
|
||||
P102|C3|I|I/O|INPUT|||||||||
|
||||
P103|C1|I|I/O|INPUT|||||||||
|
||||
P104|CFIN|I|I/O|INPUT|||||||||
|
||||
@@ -127,7 +127,7 @@ P106|SLAVE|O|I/O|OUTPUT|||||||||
|
||||
P107|OWN|O|I/O|OUTPUT|||||||||
|
||||
P108|GND||GND||||||||||
|
||||
P109|VCC||VCCIO||||||||||
|
||||
P110|LAN_CFG<4>|O|I/O|OUTPUT|||||||||
|
||||
P110|TIE||I/O||||||||||
|
||||
P111|LAN_INT|I|I/O|INPUT|||||||||
|
||||
P112|DQ<15>|I/O|I/O|BIDIR|||||||||
|
||||
P113|DQ<13>|I/O|I/O|BIDIR|||||||||
|
||||
@@ -152,7 +152,7 @@ P131|DQ<14>|I/O|I/O|BIDIR|||||||||
|
||||
P132|LAN_WRH|O|I/O|OUTPUT|||||||||
|
||||
P133|LAN_CS|O|I/O|OUTPUT|||||||||
|
||||
P134|LAN_RD|O|I/O|OUTPUT|||||||||
|
||||
P135|LAN_CFG<2>|O|I/O|OUTPUT|||||||||
|
||||
P135|INT6_OUT|O|I/O|OUTPUT|||||||||
|
||||
P136|A_LAN<12>|O|I/O|OUTPUT|||||||||
|
||||
P137|A_LAN<13>|O|I/O|OUTPUT|||||||||
|
||||
P138|A_LAN<10>|O|I/O|OUTPUT|||||||||
|
||||
@@ -160,7 +160,7 @@ P139|A_LAN<11>|O|I/O|OUTPUT|||||||||
|
||||
P140|A_LAN<8>|O|I/O|OUTPUT|||||||||
|
||||
P141|VCC||VCCINT||||||||||
|
||||
P142|A_LAN<9>|O|I/O|OUTPUT|||||||||
|
||||
P143|RESET|GSR/I|I/O/GSR||||||||||
|
||||
P143|RESET|I|I/O/GSR|INPUT|||||||||
|
||||
P144|GND||GND||||||||||
|
||||
|
||||
To preserve the pinout above for future design iterations in
|
||||
|
||||
+2702
-2135
File diff suppressed because it is too large
Load Diff
+219
-80
@@ -4,13 +4,13 @@ Copyright (c) 1995-2013 Xilinx, Inc. All rights reserved.
|
||||
|
||||
|
||||
Total REAL time to Xst completion: 1.00 secs
|
||||
Total CPU time to Xst completion: 0.13 secs
|
||||
Total CPU time to Xst completion: 0.12 secs
|
||||
|
||||
--> Parameter xsthdpdir set to xst
|
||||
|
||||
|
||||
Total REAL time to Xst completion: 1.00 secs
|
||||
Total CPU time to Xst completion: 0.13 secs
|
||||
Total CPU time to Xst completion: 0.12 secs
|
||||
|
||||
--> Reading design: LAN_IDE_CP.prj
|
||||
|
||||
@@ -77,8 +77,9 @@ Setting FSM Encoding Algorithm to : Gray
|
||||
=========================================================================
|
||||
* HDL Compilation *
|
||||
=========================================================================
|
||||
Compiling vhdl file "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP-Z2v2.vhd" in Library work.
|
||||
Architecture behavioral of Entity lan_ide_cp is up to date.
|
||||
Compiling vhdl file "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP.vhd" in Library work.
|
||||
Entity <lan_ide_cp> compiled.
|
||||
Entity <lan_ide_cp> (Architecture <behavioral>) compiled.
|
||||
|
||||
=========================================================================
|
||||
* Design Hierarchy Analysis *
|
||||
@@ -90,6 +91,12 @@ Analyzing hierarchy for entity <LAN_IDE_CP> in library <work> (architecture <beh
|
||||
* HDL Analysis *
|
||||
=========================================================================
|
||||
Analyzing Entity <LAN_IDE_CP> in library <work> (Architecture <behavioral>).
|
||||
WARNING:Xst:819 - "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP.vhd" line 271: One or more signals are missing in the process sensitivity list. To enable synthesis of FPGA/CPLD hardware, XST will assume that all necessary signals are present in the sensitivity list. Please note that the result of the synthesis may differ from the initial design specification. The missing signals are:
|
||||
<CLK_EXT>
|
||||
WARNING:Xst:819 - "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP.vhd" line 517: One or more signals are missing in the process sensitivity list. To enable synthesis of FPGA/CPLD hardware, XST will assume that all necessary signals are present in the sensitivity list. Please note that the result of the synthesis may differ from the initial design specification. The missing signals are:
|
||||
<CLK_EXT>
|
||||
WARNING:Xst:819 - "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP.vhd" line 683: One or more signals are missing in the process sensitivity list. To enable synthesis of FPGA/CPLD hardware, XST will assume that all necessary signals are present in the sensitivity list. Please note that the result of the synthesis may differ from the initial design specification. The missing signals are:
|
||||
<CLK_EXT>
|
||||
Entity <LAN_IDE_CP> analyzed. Unit <LAN_IDE_CP> generated.
|
||||
|
||||
|
||||
@@ -99,25 +106,43 @@ Entity <LAN_IDE_CP> analyzed. Unit <LAN_IDE_CP> generated.
|
||||
|
||||
Performing bidirectional port resolution...
|
||||
INFO:Xst:2561 - Always blocking tristate driving signal <A> in unit <LAN_IDE_CP> is removed.
|
||||
INFO:Xst:2561 - Always blocking tristate driving signal <A> in unit <LAN_IDE_CP> is removed.
|
||||
INFO:Xst:2561 - Always blocking tristate driving signal <A> in unit <LAN_IDE_CP> is removed.
|
||||
INFO:Xst:2561 - Always blocking tristate driving signal <A> in unit <LAN_IDE_CP> is removed.
|
||||
INFO:Xst:2561 - Always blocking tristate driving signal <A> in unit <LAN_IDE_CP> is removed.
|
||||
INFO:Xst:2561 - Always blocking tristate driving signal <A> in unit <LAN_IDE_CP> is removed.
|
||||
INFO:Xst:2561 - Always blocking tristate driving signal <A> in unit <LAN_IDE_CP> is removed.
|
||||
|
||||
Synthesizing Unit <LAN_IDE_CP>.
|
||||
Related source file is "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP-Z2v2.vhd".
|
||||
WARNING:Xst:647 - Input <DS0> is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
|
||||
WARNING:Xst:647 - Input <DS1> is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
|
||||
WARNING:Xst:647 - Input <FCS> is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
|
||||
WARNING:Xst:647 - Input <Z3> is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
|
||||
WARNING:Xst:647 - Input <MTCR> is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
|
||||
WARNING:Xst:1780 - Signal <LAN_INT_D0> is never used or assigned. This unconnected signal will be trimmed during the optimization process.
|
||||
WARNING:Xst:1780 - Signal <DTACK_S> is never used or assigned. This unconnected signal will be trimmed during the optimization process.
|
||||
Found finite state machine <FSM_0> for signal <LAN_RST_SM>.
|
||||
Related source file is "C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP.vhd".
|
||||
WARNING:Xst:647 - Input <IDE_WAIT> is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
|
||||
WARNING:Xst:647 - Input <BERR> is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
|
||||
WARNING:Xst:646 - Signal <LAN_BASEADR<7:0>> is assigned but never used. This unconnected signal will be trimmed during the optimization process.
|
||||
WARNING:Xst:1780 - Signal <CONFIG_READY> is never used or assigned. This unconnected signal will be trimmed during the optimization process.
|
||||
INFO:Xst:1799 - State start_read_upper is never reached in FSM <LAN_SM>.
|
||||
Found finite state machine <FSM_0> for signal <LAN_SM>.
|
||||
-----------------------------------------------------------------------
|
||||
| States | 13 |
|
||||
| Transitions | 19 |
|
||||
| Inputs | 4 |
|
||||
| Outputs | 14 |
|
||||
| Clock | CLK_EXT (rising_edge) |
|
||||
| Reset | LAN_SM_RST (positive) |
|
||||
| Reset type | asynchronous |
|
||||
| Reset State | nop |
|
||||
| Power Up State | nop |
|
||||
| Encoding | gray |
|
||||
| Implementation | automatic |
|
||||
-----------------------------------------------------------------------
|
||||
Found finite state machine <FSM_1> for signal <LAN_RST_SM>.
|
||||
-----------------------------------------------------------------------
|
||||
| States | 8 |
|
||||
| Transitions | 8 |
|
||||
| Inputs | 0 |
|
||||
| Outputs | 8 |
|
||||
| Outputs | 30 |
|
||||
| Clock | CLK_EXT (rising_edge) |
|
||||
| Reset | RESET (positive) |
|
||||
| Reset type | synchronous |
|
||||
| Reset type | asynchronous |
|
||||
| Reset State | nop |
|
||||
| Power Up State | nop |
|
||||
| Encoding | gray |
|
||||
@@ -131,50 +156,73 @@ WARNING:Xst:1780 - Signal <DTACK_S> is never used or assigned. This unconnected
|
||||
Found 1-bit tristate buffer for signal <DTACK>.
|
||||
Found 1-bit tristate buffer for signal <INT2_OUT>.
|
||||
Found 1-bit tristate buffer for signal <INT6_OUT>.
|
||||
Found 1-bit xor2 for signal <AMIGA_CLK$xor0000> created at line 147.
|
||||
Found 2-bit register for signal <AUTO_CONFIG_DONE>.
|
||||
Found 2-bit register for signal <AUTO_CONFIG_DONE_CYCLE>.
|
||||
Found 2-bit adder for signal <AUTO_CONFIG_DONE_CYCLE$addsub0000> created at line 415.
|
||||
Found 1-bit register for signal <autoconfig>.
|
||||
Found 1-bit register for signal <cp>.
|
||||
Found 8-bit comparator equal for signal <cp$cmp_eq0001> created at line 217.
|
||||
Found 8-bit comparator equal for signal <cp$cmp_eq0002> created at line 223.
|
||||
Found 2-bit comparator less for signal <cp$cmp_lt0000> created at line 216.
|
||||
Found 1-bit tristate buffer for signal <A<23>>.
|
||||
Found 1-bit tristate buffer for signal <A<22>>.
|
||||
Found 1-bit tristate buffer for signal <A<21>>.
|
||||
Found 1-bit tristate buffer for signal <A<20>>.
|
||||
Found 1-bit tristate buffer for signal <A<19>>.
|
||||
Found 1-bit tristate buffer for signal <A<18>>.
|
||||
Found 1-bit tristate buffer for signal <A<17>>.
|
||||
Found 1-bit tristate buffer for signal <A<16>>.
|
||||
Found 1-bit tristate buffer for signal <A<15>>.
|
||||
Found 1-bit tristate buffer for signal <A<14>>.
|
||||
Found 1-bit tristate buffer for signal <A<13>>.
|
||||
Found 1-bit tristate buffer for signal <A<12>>.
|
||||
Found 1-bit tristate buffer for signal <A<11>>.
|
||||
Found 1-bit tristate buffer for signal <A<10>>.
|
||||
Found 1-bit tristate buffer for signal <A<9>>.
|
||||
Found 1-bit tristate buffer for signal <A<8>>.
|
||||
Found 1-bit xor2 for signal <AMIGA_CLK$xor0000> created at line 184.
|
||||
Found 1-bit register for signal <AS_D0>.
|
||||
Found 1-bit register for signal <AS_D1>.
|
||||
Found 3-bit register for signal <AUTO_CONFIG_Z2_DONE>.
|
||||
Found 3-bit register for signal <AUTO_CONFIG_Z2_DONE_CYCLE>.
|
||||
Found 1-bit register for signal <AUTOCONFIG_Z2_ACCESS>.
|
||||
Found 1-bit register for signal <CP_ACCESS>.
|
||||
Found 8-bit comparator equal for signal <CP_ACCESS$cmp_eq0000> created at line 309.
|
||||
Found 8-bit register for signal <CP_BASEADR>.
|
||||
Found 1-bit register for signal <CP_RD_S>.
|
||||
Found 1-bit register for signal <CP_WE_QUIRK>.
|
||||
Found 1-bit register for signal <CP_WE_S>.
|
||||
Found 4-bit register for signal <Dout1>.
|
||||
Found 3-bit comparator less for signal <Dout1$cmp_lt0000> created at line 337.
|
||||
Found 1-bit register for signal <DS_D>.
|
||||
Found 1-bit register for signal <ide>.
|
||||
Found 8-bit comparator equal for signal <ide$cmp_eq0000> created at line 226.
|
||||
Found 4-bit register for signal <D_Z2_OUT>.
|
||||
Found 4-bit comparator less for signal <DQ$cmp_lt0000> created at line 649.
|
||||
Found 16-bit register for signal <DQ_DATA>.
|
||||
Found 1-bit register for signal <DQ_SWAP>.
|
||||
Found 2-bit comparator less for signal <DQ_SWAP$cmp_lt0000> created at line 284.
|
||||
Found 1-bit register for signal <IDE_ACCESS>.
|
||||
Found 8-bit comparator equal for signal <IDE_ACCESS$cmp_eq0000> created at line 316.
|
||||
Found 8-bit register for signal <IDE_BASEADR>.
|
||||
Found 1-bit register for signal <IDE_ENABLE>.
|
||||
Found 1-bit register for signal <IDE_R_S>.
|
||||
Found 1-bit register for signal <IDE_W_S>.
|
||||
Found 1-bit register for signal <lan_adr>.
|
||||
Found 1-bit register for signal <lan_adr_sw>.
|
||||
Found 2-bit comparator less for signal <lan_adr_sw$cmp_lt0000> created at line 219.
|
||||
Found 8-bit register for signal <LAN_BASEADR>.
|
||||
Found 1-bit register for signal <INT_VECTOR_CYCLE>.
|
||||
Found 14-bit register for signal <LAN_A_INIT>.
|
||||
Found 1-bit register for signal <LAN_ACCESS>.
|
||||
Found 8-bit comparator equal for signal <LAN_ACCESS$cmp_eq0000> created at line 283.
|
||||
Found 16-bit register for signal <LAN_BASEADR>.
|
||||
Found 1-bit register for signal <LAN_CS_RST>.
|
||||
Found 16-bit register for signal <LAN_D_INIT>.
|
||||
Found 1-bit register for signal <LAN_INT_ENABLE>.
|
||||
Found 1-bit register for signal <LAN_IRQ_D0>.
|
||||
Found 1-bit register for signal <LAN_IRQ_OUT>.
|
||||
Found 1-bit register for signal <LAN_RD_S>.
|
||||
Found 1-bit register for signal <LAN_READY>.
|
||||
Found 2-bit comparator less for signal <LAN_SM$cmp_lt0000> created at line 406.
|
||||
Found 1-bit register for signal <LAN_SM_RST>.
|
||||
Found 1-bit register for signal <LAN_WR_RST>.
|
||||
Found 1-bit register for signal <LAN_WRH_S>.
|
||||
Found 1-bit register for signal <LAN_WRL_S>.
|
||||
Found 1-bit register for signal <lancp>.
|
||||
Found 1-bit register for signal <ROM_OE_S>.
|
||||
Found 3-bit register for signal <SHUT_UP>.
|
||||
Found 3-bit register for signal <SHUT_UP_Z2>.
|
||||
Found 1-bit register for signal <Z3_A_LOW>.
|
||||
Found 14-bit register for signal <Z3_ADR>.
|
||||
Found 32-bit register for signal <Z3_DATA>.
|
||||
Summary:
|
||||
inferred 1 Finite State Machine(s).
|
||||
inferred 18 D-type flip-flop(s).
|
||||
inferred 1 Adder/Subtractor(s).
|
||||
inferred 2 Finite State Machine(s).
|
||||
inferred 61 D-type flip-flop(s).
|
||||
inferred 6 Comparator(s).
|
||||
inferred 1 Xor(s).
|
||||
inferred 38 Tristate(s).
|
||||
inferred 54 Tristate(s).
|
||||
Unit <LAN_IDE_CP> synthesized.
|
||||
|
||||
|
||||
@@ -182,19 +230,19 @@ Unit <LAN_IDE_CP> synthesized.
|
||||
HDL Synthesis Report
|
||||
|
||||
Macro Statistics
|
||||
# Adders/Subtractors : 1
|
||||
2-bit adder : 1
|
||||
# Registers : 31
|
||||
1-bit register : 25
|
||||
2-bit register : 2
|
||||
# Registers : 73
|
||||
1-bit register : 64
|
||||
14-bit register : 2
|
||||
16-bit register : 3
|
||||
3-bit register : 1
|
||||
4-bit register : 1
|
||||
8-bit register : 3
|
||||
8-bit register : 2
|
||||
# Comparators : 6
|
||||
2-bit comparator less : 2
|
||||
3-bit comparator less : 1
|
||||
4-bit comparator less : 1
|
||||
8-bit comparator equal : 3
|
||||
# Tristates : 8
|
||||
1-bit tristate buffer : 6
|
||||
# Tristates : 24
|
||||
1-bit tristate buffer : 22
|
||||
16-bit tristate buffer : 2
|
||||
# Xors : 1
|
||||
1-bit xor2 : 1
|
||||
@@ -218,16 +266,55 @@ Optimizing FSM <LAN_RST_SM/FSM> on signal <LAN_RST_SM[1:3]> with gray encoding.
|
||||
set_commit | 101
|
||||
done | 100
|
||||
------------------------
|
||||
Optimizing FSM <LAN_SM/FSM> on signal <LAN_SM[1:4]> with gray encoding.
|
||||
-------------------------------
|
||||
State | Encoding
|
||||
-------------------------------
|
||||
nop | 0000
|
||||
start_read_upper | unreached
|
||||
wait_read_upper | 0011
|
||||
end_read_upper | 0101
|
||||
start_read_lower | 0100
|
||||
wait_read_lower | 0010
|
||||
end_read_lower | 1100
|
||||
start_write_upper | 0110
|
||||
wait_write_upper | 1101
|
||||
end_write_upper | 1111
|
||||
start_write_lower | 0111
|
||||
wait_write_lower | 1110
|
||||
end_write_lower | 1010
|
||||
config_rw | 0001
|
||||
-------------------------------
|
||||
WARNING:Xst:1293 - FF/Latch <0> has a constant value of 1 in block <13>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1293 - FF/Latch <0> has a constant value of 1 in block <12>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1293 - FF/Latch <0> has a constant value of 1 in block <11>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1293 - FF/Latch <0> has a constant value of 1 in block <10>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1293 - FF/Latch <0> has a constant value of 1 in block <9>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1293 - FF/Latch <0> has a constant value of 1 in block <8>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1293 - FF/Latch <0> has a constant value of 1 in block <7>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1293 - FF/Latch <0> has a constant value of 1 in block <5>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1293 - FF/Latch <0> has a constant value of 1 in block <4>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1293 - FF/Latch <0> has a constant value of 1 in block <2>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1293 - FF/Latch <0> has a constant value of 1 in block <1>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1293 - FF/Latch <0> has a constant value of 1 in block <0>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1293 - FF/Latch <0> has a constant value of 0 in block <15>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1293 - FF/Latch <0> has a constant value of 0 in block <14>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1293 - FF/Latch <0> has a constant value of 0 in block <13>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1293 - FF/Latch <0> has a constant value of 0 in block <12>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1293 - FF/Latch <0> has a constant value of 0 in block <7>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1293 - FF/Latch <0> has a constant value of 0 in block <6>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1293 - FF/Latch <0> has a constant value of 0 in block <5>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1293 - FF/Latch <0> has a constant value of 0 in block <3>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1293 - FF/Latch <0> has a constant value of 0 in block <2>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1293 - FF/Latch <0> has a constant value of 0 in block <0>. This FF/Latch will be trimmed during the optimization process.
|
||||
|
||||
=========================================================================
|
||||
Advanced HDL Synthesis Report
|
||||
|
||||
Macro Statistics
|
||||
# FSMs : 1
|
||||
# Adders/Subtractors : 1
|
||||
2-bit adder : 1
|
||||
# Registers : 18
|
||||
Flip-Flops : 18
|
||||
# FSMs : 2
|
||||
# Registers : 61
|
||||
Flip-Flops : 61
|
||||
# Comparators : 3
|
||||
8-bit comparator equal : 3
|
||||
|
||||
@@ -236,11 +323,65 @@ Macro Statistics
|
||||
=========================================================================
|
||||
* Low Level Synthesis *
|
||||
=========================================================================
|
||||
WARNING:Xst:1293 - FF/Latch <LAN_D_INIT_15> has a constant value of 0 in block <LAN_IDE_CP>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1896 - Due to other FF/Latch trimming, FF/Latch <LAN_D_INIT_14> has a constant value of 0 in block <LAN_IDE_CP>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1896 - Due to other FF/Latch trimming, FF/Latch <LAN_D_INIT_13> has a constant value of 0 in block <LAN_IDE_CP>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1896 - Due to other FF/Latch trimming, FF/Latch <LAN_D_INIT_12> has a constant value of 0 in block <LAN_IDE_CP>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1896 - Due to other FF/Latch trimming, FF/Latch <LAN_D_INIT_7> has a constant value of 0 in block <LAN_IDE_CP>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1896 - Due to other FF/Latch trimming, FF/Latch <LAN_D_INIT_6> has a constant value of 0 in block <LAN_IDE_CP>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1896 - Due to other FF/Latch trimming, FF/Latch <LAN_D_INIT_5> has a constant value of 0 in block <LAN_IDE_CP>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1896 - Due to other FF/Latch trimming, FF/Latch <LAN_D_INIT_3> has a constant value of 0 in block <LAN_IDE_CP>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1896 - Due to other FF/Latch trimming, FF/Latch <LAN_D_INIT_2> has a constant value of 0 in block <LAN_IDE_CP>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1896 - Due to other FF/Latch trimming, FF/Latch <LAN_D_INIT_0> has a constant value of 0 in block <LAN_IDE_CP>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1896 - Due to other FF/Latch trimming, FF/Latch <LAN_A_INIT_13> has a constant value of 1 in block <LAN_IDE_CP>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1896 - Due to other FF/Latch trimming, FF/Latch <LAN_A_INIT_12> has a constant value of 1 in block <LAN_IDE_CP>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1896 - Due to other FF/Latch trimming, FF/Latch <LAN_A_INIT_11> has a constant value of 1 in block <LAN_IDE_CP>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1896 - Due to other FF/Latch trimming, FF/Latch <LAN_A_INIT_10> has a constant value of 1 in block <LAN_IDE_CP>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1896 - Due to other FF/Latch trimming, FF/Latch <LAN_A_INIT_9> has a constant value of 1 in block <LAN_IDE_CP>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1896 - Due to other FF/Latch trimming, FF/Latch <LAN_A_INIT_8> has a constant value of 1 in block <LAN_IDE_CP>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1896 - Due to other FF/Latch trimming, FF/Latch <LAN_A_INIT_7> has a constant value of 1 in block <LAN_IDE_CP>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1896 - Due to other FF/Latch trimming, FF/Latch <LAN_A_INIT_5> has a constant value of 1 in block <LAN_IDE_CP>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1896 - Due to other FF/Latch trimming, FF/Latch <LAN_A_INIT_4> has a constant value of 1 in block <LAN_IDE_CP>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1896 - Due to other FF/Latch trimming, FF/Latch <LAN_A_INIT_2> has a constant value of 1 in block <LAN_IDE_CP>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1896 - Due to other FF/Latch trimming, FF/Latch <LAN_A_INIT_1> has a constant value of 1 in block <LAN_IDE_CP>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:1896 - Due to other FF/Latch trimming, FF/Latch <LAN_A_INIT_0> has a constant value of 1 in block <LAN_IDE_CP>. This FF/Latch will be trimmed during the optimization process.
|
||||
WARNING:Xst:2677 - Node <LAN_BASEADR_7> of sequential type is unconnected in block <LAN_IDE_CP>.
|
||||
WARNING:Xst:2677 - Node <LAN_BASEADR_6> of sequential type is unconnected in block <LAN_IDE_CP>.
|
||||
WARNING:Xst:2677 - Node <LAN_BASEADR_5> of sequential type is unconnected in block <LAN_IDE_CP>.
|
||||
WARNING:Xst:2677 - Node <LAN_BASEADR_4> of sequential type is unconnected in block <LAN_IDE_CP>.
|
||||
WARNING:Xst:2677 - Node <LAN_BASEADR_3> of sequential type is unconnected in block <LAN_IDE_CP>.
|
||||
WARNING:Xst:2677 - Node <LAN_BASEADR_2> of sequential type is unconnected in block <LAN_IDE_CP>.
|
||||
WARNING:Xst:2677 - Node <LAN_BASEADR_1> of sequential type is unconnected in block <LAN_IDE_CP>.
|
||||
WARNING:Xst:2677 - Node <LAN_BASEADR_0> of sequential type is unconnected in block <LAN_IDE_CP>.
|
||||
INFO:Xst:2261 - The FF/Latch <LAN_D_INIT_8> in Unit <LAN_IDE_CP> is equivalent to the following 2 FFs/Latches, which will be removed : <LAN_D_INIT_10> <LAN_D_INIT_11>
|
||||
INFO:Xst:2261 - The FF/Latch <LAN_D_INIT_1> in Unit <LAN_IDE_CP> is equivalent to the following 2 FFs/Latches, which will be removed : <LAN_D_INIT_4> <LAN_D_INIT_9>
|
||||
|
||||
Optimizing unit <LAN_IDE_CP> ...
|
||||
implementation constraint: INIT=r : AUTO_CONFIG_Z2_DONE_CYCLE_0
|
||||
implementation constraint: INIT=r : AUTO_CONFIG_Z2_DONE_CYCLE_1
|
||||
implementation constraint: INIT=s : SHUT_UP_Z2_0
|
||||
implementation constraint: INIT=r : LAN_INT_ENABLE
|
||||
implementation constraint: INIT=r : AUTO_CONFIG_Z2_DONE_CYCLE_2
|
||||
implementation constraint: INIT=r : AUTO_CONFIG_Z2_DONE_1
|
||||
implementation constraint: INIT=s : D_Z2_OUT_0
|
||||
implementation constraint: INIT=s : D_Z2_OUT_2
|
||||
implementation constraint: INIT=s : LAN_A_INIT_3
|
||||
implementation constraint: INIT=s : LAN_A_INIT_6
|
||||
implementation constraint: INIT=s : D_Z2_OUT_3
|
||||
implementation constraint: INIT=s : D_Z2_OUT_1
|
||||
implementation constraint: INIT=r : AUTO_CONFIG_Z2_DONE_2
|
||||
implementation constraint: INIT=r : AUTO_CONFIG_Z2_DONE_0
|
||||
implementation constraint: INIT=r : LAN_D_INIT_1
|
||||
implementation constraint: INIT=r : LAN_D_INIT_8
|
||||
implementation constraint: INIT=s : SHUT_UP_Z2_1
|
||||
implementation constraint: INIT=s : SHUT_UP_Z2_2
|
||||
implementation constraint: INIT=r : LAN_RST_SM_FSM_FFd1
|
||||
implementation constraint: INIT=r : LAN_RST_SM_FSM_FFd2
|
||||
implementation constraint: INIT=r : LAN_RST_SM_FSM_FFd3
|
||||
implementation constraint: INIT=r : LAN_SM_FSM_FFd1
|
||||
implementation constraint: INIT=r : LAN_SM_FSM_FFd2
|
||||
implementation constraint: INIT=r : LAN_SM_FSM_FFd3
|
||||
implementation constraint: INIT=r : LAN_SM_FSM_FFd4
|
||||
|
||||
=========================================================================
|
||||
* Partition Report *
|
||||
@@ -269,45 +410,43 @@ Clock Enable : YES
|
||||
wysiwyg : NO
|
||||
|
||||
Design Statistics
|
||||
# IOs : 117
|
||||
# IOs : 113
|
||||
|
||||
Cell Usage :
|
||||
# BELS : 904
|
||||
# AND2 : 207
|
||||
# AND3 : 75
|
||||
# AND4 : 9
|
||||
# AND5 : 2
|
||||
# AND6 : 1
|
||||
# BELS : 1475
|
||||
# AND2 : 486
|
||||
# AND3 : 67
|
||||
# AND4 : 26
|
||||
# AND5 : 1
|
||||
# AND8 : 3
|
||||
# GND : 1
|
||||
# INV : 374
|
||||
# OR2 : 182
|
||||
# OR3 : 20
|
||||
# OR4 : 2
|
||||
# VCC : 1
|
||||
# XOR2 : 27
|
||||
# FlipFlops/Latches : 60
|
||||
# FD : 11
|
||||
# FDC : 6
|
||||
# FDCE : 6
|
||||
# FDP : 4
|
||||
# FDPE : 33
|
||||
# IO Buffers : 112
|
||||
# IBUF : 37
|
||||
# IOBUFE : 32
|
||||
# OBUF : 37
|
||||
# INV : 558
|
||||
# OR2 : 246
|
||||
# OR3 : 58
|
||||
# OR4 : 4
|
||||
# XOR2 : 25
|
||||
# FlipFlops/Latches : 136
|
||||
# FD : 4
|
||||
# FDC : 19
|
||||
# FDCE : 10
|
||||
# FDP : 27
|
||||
# FDPE : 76
|
||||
# IO Buffers : 111
|
||||
# IBUF : 24
|
||||
# IOBUFE : 48
|
||||
# OBUF : 33
|
||||
# OBUFE : 6
|
||||
=========================================================================
|
||||
|
||||
|
||||
Total REAL time to Xst completion: 9.00 secs
|
||||
Total CPU time to Xst completion: 8.51 secs
|
||||
Total CPU time to Xst completion: 8.50 secs
|
||||
|
||||
-->
|
||||
|
||||
Total memory usage is 4534796 kilobytes
|
||||
Total memory usage is 4521784 kilobytes
|
||||
|
||||
Number of errors : 0 ( 0 filtered)
|
||||
Number of warnings : 7 ( 0 filtered)
|
||||
Number of infos : 1 ( 0 filtered)
|
||||
Number of warnings : 59 ( 0 filtered)
|
||||
Number of infos : 10 ( 0 filtered)
|
||||
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
@@ -155,6 +155,8 @@ architecture Behavioral of LAN_IDE_CP is
|
||||
|
||||
signal AMIGA_CLK:STD_LOGIC;
|
||||
signal DS:STD_LOGIC;
|
||||
signal AS_D0:STD_LOGIC;
|
||||
signal AS_D1:STD_LOGIC;
|
||||
|
||||
signal LAN_CS_RST: std_logic;
|
||||
signal LAN_WR_RST: std_logic;
|
||||
@@ -249,64 +251,76 @@ begin
|
||||
ADDRESS_Z3_DECODE: process(reset,FCS)
|
||||
begin
|
||||
if(reset='0')then
|
||||
|
||||
elsif(falling_edge(FCS))then
|
||||
|
||||
|
||||
end if;
|
||||
end process ADDRESS_Z3_DECODE;
|
||||
|
||||
ADDRESS_DECODE: process(FCS,reset,AS)
|
||||
begin
|
||||
if(reset='0' )then
|
||||
AUTOCONFIG_Z2_ACCESS <= '0';
|
||||
IDE_ACCESS <= '0';
|
||||
CP_ACCESS <= '0';
|
||||
AS_D0 <='1';
|
||||
LAN_ACCESS <= '0';
|
||||
DQ_SWAP <= '1';
|
||||
Z3_ADR <= (others => '1');
|
||||
INT_VECTOR_CYCLE <='0';
|
||||
elsif(falling_edge(FCS))then
|
||||
|
||||
Z3_ADR(15 downto 2) <= A(15 downto 2);-- latch the whole address for the whole cycle
|
||||
|
||||
INT_VECTOR_CYCLE <= not MTCR; --is this s special int vector cycle?!?
|
||||
|
||||
--use D(15 downto 8)& A(23 downto 16) = A(31 downto 16) for quick response
|
||||
|
||||
--lan base
|
||||
--if(Z3='1' and (D(15 downto 8) & A(23 downto 16)) = LAN_BASEADR and SHUT_UP_Z2(0)='0' )then
|
||||
if(Z3='1' and (D(15 downto 8) ) = LAN_BASEADR(15 downto 8) and SHUT_UP_Z2(0)='0' )then --only the upper 8 bits matter!!!
|
||||
if(A(14 downto 13)<"11")then
|
||||
DQ_SWAP <= '1';
|
||||
elsif(rising_edge(CLK_EXT))then
|
||||
|
||||
if(FCS='0' and AS_D1 ='1' and Z3='1') then
|
||||
Z3_ADR(15 downto 2) <= A(15 downto 2);-- latch the whole address for the whole cycle
|
||||
|
||||
INT_VECTOR_CYCLE <= not MTCR; --is this s special int vector cycle?!?
|
||||
|
||||
--use D(15 downto 8)& A(23 downto 16) = A(31 downto 16) for quick response
|
||||
|
||||
--lan base
|
||||
--if(Z3='1' and (D(15 downto 8) & A(23 downto 16)) = LAN_BASEADR and SHUT_UP_Z2(0)='0' )then
|
||||
if((D(15 downto 8) ) = LAN_BASEADR(15 downto 8) and SHUT_UP_Z2(0)='0' )then --only the upper 8 bits matter!!!
|
||||
if(A(14 downto 13)<"11")then
|
||||
DQ_SWAP <= '1';
|
||||
else
|
||||
DQ_SWAP <= '0';
|
||||
end if;
|
||||
LAN_ACCESS <= '1';
|
||||
else
|
||||
DQ_SWAP <= '0';
|
||||
LAN_ACCESS <= '0';
|
||||
DQ_SWAP <= '1';
|
||||
end if;
|
||||
LAN_ACCESS <= '1';
|
||||
else
|
||||
elsif(FCS ='1' or Z3='0')then
|
||||
LAN_ACCESS <= '0';
|
||||
DQ_SWAP <= '1';
|
||||
end if;
|
||||
end if;
|
||||
end process ADDRESS_Z3_DECODE;
|
||||
|
||||
ADDRESS_Z2_DECODE: process(FCS,reset,AS)
|
||||
begin
|
||||
if(reset='0' or FCS='1')then
|
||||
AUTOCONFIG_Z2_ACCESS <= '0';
|
||||
IDE_ACCESS <= '0';
|
||||
CP_ACCESS <= '0';
|
||||
elsif(falling_edge(AS))then
|
||||
|
||||
if(A(23 downto 16) = x"E8" and AUTO_CONFIG_Z2_DONE /= "111" and CFIN='0')then
|
||||
end if;
|
||||
|
||||
|
||||
AS_D0 <= AS;
|
||||
AS_D1 <= FCS; -- double sync!
|
||||
if(A(23 downto 16) = x"E8" and AUTO_CONFIG_Z2_DONE /= "111" and CFIN='0' and LAN_ACCESS = '0' and AS='0')then
|
||||
AUTOCONFIG_Z2_ACCESS <= '1';
|
||||
else
|
||||
AUTOCONFIG_Z2_ACCESS <= '0';
|
||||
end if;
|
||||
|
||||
--CP base
|
||||
if(A(23 downto 16) = CP_BASEADR and SHUT_UP_Z2(1)='0' and LAN_ACCESS = '0')then
|
||||
if(A(23 downto 16) = CP_BASEADR and SHUT_UP_Z2(1)='0' and LAN_ACCESS = '0' and AS='0' )then
|
||||
CP_ACCESS <= '1';
|
||||
else
|
||||
CP_ACCESS <= '0';
|
||||
end if;
|
||||
|
||||
--IDE base
|
||||
if(A(23 downto 16) = IDE_BASEADR and SHUT_UP_Z2(2)='0' and LAN_ACCESS = '0' )then
|
||||
if(A(23 downto 16) = IDE_BASEADR and SHUT_UP_Z2(2)='0' and LAN_ACCESS = '0' and AS='0' )then
|
||||
IDE_ACCESS <= '1';
|
||||
else
|
||||
IDE_ACCESS <= '0';
|
||||
end if;
|
||||
|
||||
end if;
|
||||
end process ADDRESS_Z2_DECODE;
|
||||
end process ADDRESS_DECODE;
|
||||
|
||||
--LAN interrupt controll
|
||||
lan_int_proc: process (CLK_EXT,reset)
|
||||
@@ -501,9 +515,9 @@ begin
|
||||
CP_BASEADR<=x"FF";
|
||||
AUTO_CONFIG_Z2_DONE <="000";
|
||||
LAN_BASEADR<=x"FFFF";
|
||||
elsif falling_edge(AMIGA_CLK) then -- no reset, so wait for rising edge of the clock
|
||||
elsif rising_edge(CLK_EXT) then -- no reset, so wait for rising edge of the clock
|
||||
D_Z2_OUT<="1111";
|
||||
if(AS='1')then
|
||||
if(AS_D0='1')then
|
||||
AUTO_CONFIG_Z2_DONE <= AUTO_CONFIG_Z2_DONE or AUTO_CONFIG_Z2_DONE_CYCLE or (not AUTOBOOT_OFF & "00") ;
|
||||
elsif(AUTOCONFIG_Z2_ACCESS= '1' and DS='0') then
|
||||
case A(6 downto 1) is
|
||||
@@ -667,26 +681,25 @@ begin
|
||||
IDE_R_S <= '1';
|
||||
IDE_W_S <= '1';
|
||||
ROM_OE_S <= '1';
|
||||
elsif falling_edge(AMIGA_CLK) then
|
||||
elsif rising_edge(CLK_EXT) then
|
||||
--default values
|
||||
IDE_R_S <= '1';
|
||||
IDE_W_S <= '1';
|
||||
ROM_OE_S <= '1';
|
||||
if(IDE_ACCESS='1' and AS='0')then
|
||||
if(IDE_ACCESS='1')then
|
||||
if(RW='0')then
|
||||
--the write goes to the hdd!
|
||||
IDE_ENABLE <= '0'; -- enable IDE on first read
|
||||
IDE_W_S <= '0';
|
||||
else
|
||||
IDE_R_S <= IDE_ENABLE; --read from IDE instead from ROM
|
||||
ROM_OE_S <= not IDE_ENABLE;
|
||||
ROM_OE_S <= not IDE_ENABLE;
|
||||
end if;
|
||||
end if;
|
||||
end if;
|
||||
end process ide_rw_gen;
|
||||
|
||||
IDE_W <= IDE_W_S when AS='0' else '1';
|
||||
IDE_R <= IDE_R_S when AS='0' else '1';
|
||||
IDE_R <= IDE_R_S when AS='0' else '1';
|
||||
ROM_OE<= ROM_OE_S when AS='0' else '1';
|
||||
IDE_CS(0)<= not(A(12));
|
||||
IDE_CS(1)<= not(A(13));
|
||||
@@ -708,8 +721,6 @@ begin
|
||||
CP_WE_QUIRK <= CP_WE_S; --the clockport write must be low exactly one 7MHz cycle!
|
||||
end if;
|
||||
end process cp_rw_gen;
|
||||
|
||||
--for the future
|
||||
CP_WE <= CP_WE_S when AS='0' and CP_WE_QUIRK ='1' else '1';
|
||||
CP_RD <= CP_RD_S when AS='0' else '1';
|
||||
CP_CS <= not CP_ACCESS;
|
||||
|
||||
+15520
-10612
File diff suppressed because it is too large
Load Diff
Binary file not shown.
@@ -67,10 +67,12 @@
|
||||
<status xil_pn:value="SuccessfullyRun"/>
|
||||
<status xil_pn:value="ReadyToRun"/>
|
||||
</transform>
|
||||
<transform xil_pn:end_ts="1551552942" xil_pn:in_ck="-8368315473908605201" xil_pn:name="TRANEXT_xstsynthesize_xc9500xl" xil_pn:prop_ck="-5742752562858310575" xil_pn:start_ts="1551552931">
|
||||
<transform xil_pn:end_ts="1545595558" xil_pn:in_ck="-2520376148396271922" xil_pn:name="TRANEXT_xstsynthesize_xc9500xl" xil_pn:prop_ck="1235887333676579674" xil_pn:start_ts="1545595546">
|
||||
<status xil_pn:value="SuccessfullyRun"/>
|
||||
<status xil_pn:value="WarningsGenerated"/>
|
||||
<status xil_pn:value="ReadyToRun"/>
|
||||
<status xil_pn:value="OutOfDateForInputs"/>
|
||||
<status xil_pn:value="OutOfDateForProperties"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP.lso"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP.ngc"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP.ngr"/>
|
||||
@@ -84,23 +86,26 @@
|
||||
<outfile xil_pn:name="webtalk_pn.xml"/>
|
||||
<outfile xil_pn:name="xst"/>
|
||||
</transform>
|
||||
<transform xil_pn:end_ts="1550744562" xil_pn:in_ck="176569500195729039" xil_pn:name="TRAN_compileBCD2" xil_pn:prop_ck="-8537920303570934858" xil_pn:start_ts="1550744562">
|
||||
<transform xil_pn:end_ts="1545079613" xil_pn:in_ck="176569500195729039" xil_pn:name="TRAN_compileBCD2" xil_pn:prop_ck="-8537920303570934858" xil_pn:start_ts="1545079613">
|
||||
<status xil_pn:value="SuccessfullyRun"/>
|
||||
<status xil_pn:value="ReadyToRun"/>
|
||||
</transform>
|
||||
<transform xil_pn:end_ts="1551552950" xil_pn:in_ck="-8547647177936735053" xil_pn:name="TRAN_ngdbuild" xil_pn:prop_ck="6932115226421322529" xil_pn:start_ts="1551552942">
|
||||
<transform xil_pn:end_ts="1545595565" xil_pn:in_ck="-8547647177936735053" xil_pn:name="TRAN_ngdbuild" xil_pn:prop_ck="6932115226421322529" xil_pn:start_ts="1545595558">
|
||||
<status xil_pn:value="SuccessfullyRun"/>
|
||||
<status xil_pn:value="WarningsGenerated"/>
|
||||
<status xil_pn:value="ReadyToRun"/>
|
||||
<status xil_pn:value="OutOfDateForPredecessor"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP.bld"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP.ngd"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP_ngdbuild.xrpt"/>
|
||||
<outfile xil_pn:name="_ngo"/>
|
||||
<outfile xil_pn:name="_xmsgs/ngdbuild.xmsgs"/>
|
||||
</transform>
|
||||
<transform xil_pn:end_ts="1551552983" xil_pn:in_ck="-2520376148396280667" xil_pn:name="TRANEXT_vm6File_xc9500xl" xil_pn:prop_ck="-1014768965495450326" xil_pn:start_ts="1551552950">
|
||||
<transform xil_pn:end_ts="1545595609" xil_pn:in_ck="-2520376148396280667" xil_pn:name="TRANEXT_vm6File_xc9500xl" xil_pn:prop_ck="-1014768965495450326" xil_pn:start_ts="1545595565">
|
||||
<status xil_pn:value="SuccessfullyRun"/>
|
||||
<status xil_pn:value="WarningsGenerated"/>
|
||||
<status xil_pn:value="ReadyToRun"/>
|
||||
<status xil_pn:value="OutOfDateForPredecessor"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP.gyd"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP.mfd"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP.nga"/>
|
||||
@@ -114,32 +119,32 @@
|
||||
<outfile xil_pn:name="LAN_IDE_CP_html"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP_pad.csv"/>
|
||||
</transform>
|
||||
<transform xil_pn:end_ts="1551552985" xil_pn:in_ck="-2520376148396271803" xil_pn:name="TRANEXT_crtProg_xc9500" xil_pn:prop_ck="-6294026017969277533" xil_pn:start_ts="1551552983">
|
||||
<transform xil_pn:end_ts="1545595612" xil_pn:in_ck="-2520376148396271803" xil_pn:name="TRANEXT_crtProg_xc9500" xil_pn:prop_ck="-6294026017969277533" xil_pn:start_ts="1545595609">
|
||||
<status xil_pn:value="SuccessfullyRun"/>
|
||||
<status xil_pn:value="ReadyToRun"/>
|
||||
<status xil_pn:value="OutOfDateForPredecessor"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP.jed"/>
|
||||
</transform>
|
||||
<transform xil_pn:end_ts="1545129218" xil_pn:in_ck="-2520376148396285089" xil_pn:name="TRAN_impactProgrammingTool_CPLD" xil_pn:prop_ck="-3598488201878296819" xil_pn:start_ts="1545129218">
|
||||
<status xil_pn:value="AbortedRun"/>
|
||||
<status xil_pn:value="ReadyToRun"/>
|
||||
<status xil_pn:value="OutOfDateForInputs"/>
|
||||
<status xil_pn:value="OutOfDateForPredecessor"/>
|
||||
<status xil_pn:value="OutOfDateForced"/>
|
||||
<status xil_pn:value="InputChanged"/>
|
||||
<status xil_pn:value="InputRemoved"/>
|
||||
</transform>
|
||||
<transform xil_pn:end_ts="1545595676" xil_pn:in_ck="-2520376148396285089" xil_pn:name="TRAN_configureTargetDevice_CPLD" xil_pn:prop_ck="-154879694275837835" xil_pn:start_ts="1545595673">
|
||||
<status xil_pn:value="SuccessfullyRun"/>
|
||||
<status xil_pn:value="ReadyToRun"/>
|
||||
<status xil_pn:value="OutOfDateForInputs"/>
|
||||
<status xil_pn:value="InputRemoved"/>
|
||||
<status xil_pn:value="OutOfDateForPredecessor"/>
|
||||
</transform>
|
||||
<transform xil_pn:name="TRAN_timRpt">
|
||||
<status xil_pn:value="AbortedRun"/>
|
||||
<status xil_pn:value="ReadyToRun"/>
|
||||
<status xil_pn:value="OutOfDateForInputs"/>
|
||||
<status xil_pn:value="OutOfDateForPredecessor"/>
|
||||
<status xil_pn:value="InputAdded"/>
|
||||
<status xil_pn:value="InputChanged"/>
|
||||
<status xil_pn:value="InputRemoved"/>
|
||||
</transform>
|
||||
</transforms>
|
||||
|
||||
|
||||
@@ -9,10 +9,10 @@
|
||||
<!-- along with the project source files, is sufficient to open and -->
|
||||
<!-- implement in ISE Project Navigator. -->
|
||||
<!-- -->
|
||||
<!-- Copyright (c) 1995-2012 Xilinx, Inc. All rights reserved. -->
|
||||
<!-- Copyright (c) 1995-2013 Xilinx, Inc. All rights reserved. -->
|
||||
</header>
|
||||
|
||||
<version xil_pn:ise_version="14.1" xil_pn:schema_version="2"/>
|
||||
<version xil_pn:ise_version="14.7" xil_pn:schema_version="2"/>
|
||||
|
||||
<files>
|
||||
<file xil_pn:name="LAN_IDE_CP-Z2v2.vhd" xil_pn:type="FILE_VHDL">
|
||||
|
||||
@@ -0,0 +1,139 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
|
||||
<generated_project xmlns="http://www.xilinx.com/XMLSchema" xmlns:xil_pn="http://www.xilinx.com/XMLSchema">
|
||||
|
||||
<!-- -->
|
||||
|
||||
<!-- For tool use only. Do not edit. -->
|
||||
|
||||
<!-- -->
|
||||
|
||||
<!-- ProjectNavigator created generated project file. -->
|
||||
|
||||
<!-- For use in tracking generated file and other information -->
|
||||
|
||||
<!-- allowing preservation of process status. -->
|
||||
|
||||
<!-- -->
|
||||
|
||||
<!-- Copyright (c) 1995-2013 Xilinx, Inc. All rights reserved. -->
|
||||
|
||||
<version xmlns="http://www.xilinx.com/XMLSchema">11.1</version>
|
||||
|
||||
<sourceproject xmlns="http://www.xilinx.com/XMLSchema" xil_pn:fileType="FILE_XISE" xil_pn:name="LAN_IDEz3v2.xise"/>
|
||||
|
||||
<files xmlns="http://www.xilinx.com/XMLSchema">
|
||||
<file xil_pn:branch="Implementation" xil_pn:fileType="FILE_NGDBUILD_LOG" xil_pn:name="LAN_IDE_CP.bld"/>
|
||||
<file xil_pn:fileType="FILE_CMD_LOG" xil_pn:name="LAN_IDE_CP.cmd_log"/>
|
||||
<file xil_pn:branch="Implementation" xil_pn:fileType="FILE_GYD" xil_pn:name="LAN_IDE_CP.gyd"/>
|
||||
<file xil_pn:branch="Implementation" xil_pn:fileType="FILE_JEDEC" xil_pn:name="LAN_IDE_CP.jed"/>
|
||||
<file xil_pn:branch="Implementation" xil_pn:fileType="FILE_LSO" xil_pn:name="LAN_IDE_CP.lso"/>
|
||||
<file xil_pn:branch="Implementation" xil_pn:fileType="FILE_MFD" xil_pn:name="LAN_IDE_CP.mfd"/>
|
||||
<file xil_pn:branch="Implementation" xil_pn:fileType="FILE_NGA" xil_pn:name="LAN_IDE_CP.nga"/>
|
||||
<file xil_pn:branch="Implementation" xil_pn:fileType="FILE_NGC" xil_pn:name="LAN_IDE_CP.ngc"/>
|
||||
<file xil_pn:branch="Implementation" xil_pn:fileType="FILE_NGD" xil_pn:name="LAN_IDE_CP.ngd"/>
|
||||
<file xil_pn:branch="Implementation" xil_pn:fileType="FILE_NGR" xil_pn:name="LAN_IDE_CP.ngr"/>
|
||||
<file xil_pn:fileType="FILE_PAD_MISC" xil_pn:name="LAN_IDE_CP.pad"/>
|
||||
<file xil_pn:branch="Implementation" xil_pn:fileType="FILE_PNX" xil_pn:name="LAN_IDE_CP.pnx"/>
|
||||
<file xil_pn:branch="Implementation" xil_pn:fileType="FILE_XST_PROJECT" xil_pn:name="LAN_IDE_CP.prj"/>
|
||||
<file xil_pn:fileType="FILE_FITTER_REPORT" xil_pn:name="LAN_IDE_CP.rpt"/>
|
||||
<file xil_pn:branch="Implementation" xil_pn:fileType="FILE_XST_STX" xil_pn:name="LAN_IDE_CP.stx"/>
|
||||
<file xil_pn:branch="Implementation" xil_pn:fileType="FILE_XST_REPORT" xil_pn:name="LAN_IDE_CP.syr"/>
|
||||
<file xil_pn:fileType="FILE_FITTER_REPORT" xil_pn:name="LAN_IDE_CP.tim"/>
|
||||
<file xil_pn:fileType="FILE_FITTER_REPORT" xil_pn:name="LAN_IDE_CP.tspec"/>
|
||||
<file xil_pn:branch="Implementation" xil_pn:fileType="FILE_VM6" xil_pn:name="LAN_IDE_CP.vm6"/>
|
||||
<file xil_pn:fileType="FILE_FITTER_REPORT" xil_pn:name="LAN_IDE_CP.xml"/>
|
||||
<file xil_pn:branch="Implementation" xil_pn:fileType="FILE_XST" xil_pn:name="LAN_IDE_CP.xst"/>
|
||||
<file xil_pn:fileType="FILE_FITTER_REPORT" xil_pn:name="LAN_IDE_CP_build.xml"/>
|
||||
<file xil_pn:fileType="FILE_HTML" xil_pn:name="LAN_IDE_CP_envsettings.html"/>
|
||||
<file xil_pn:fileType="FILE_DIRECTORY" xil_pn:name="LAN_IDE_CP_html"/>
|
||||
<file xil_pn:fileType="FILE_XRPT" xil_pn:name="LAN_IDE_CP_ngdbuild.xrpt"/>
|
||||
<file xil_pn:fileType="FILE_PAD_EXCEL_REPORT" xil_pn:name="LAN_IDE_CP_pad.csv"/>
|
||||
<file xil_pn:fileType="FILE_HTML" xil_pn:name="LAN_IDE_CP_summary.html"/>
|
||||
<file xil_pn:branch="Implementation" xil_pn:fileType="FILE_XST_PROJECT" xil_pn:name="LAN_IDE_CP_vhdl.prj"/>
|
||||
<file xil_pn:fileType="FILE_XRPT" xil_pn:name="LAN_IDE_CP_xst.xrpt"/>
|
||||
<file xil_pn:fileType="FILE_DIRECTORY" xil_pn:name="_ngo"/>
|
||||
<file xil_pn:fileType="FILE_XMSGS" xil_pn:name="_xmsgs/ngdbuild.xmsgs"/>
|
||||
<file xil_pn:fileType="FILE_XMSGS" xil_pn:name="_xmsgs/xst.xmsgs"/>
|
||||
<file xil_pn:fileType="FILE_FITTER_REPORT" xil_pn:name="webtalk_pn.xml"/>
|
||||
<file xil_pn:fileType="FILE_DIRECTORY" xil_pn:name="xlnx_auto_0_xdb"/>
|
||||
<file xil_pn:fileType="FILE_DIRECTORY" xil_pn:name="xst"/>
|
||||
</files>
|
||||
|
||||
<transforms xmlns="http://www.xilinx.com/XMLSchema">
|
||||
<transform xil_pn:end_ts="1558897330" xil_pn:name="TRAN_copyInitialToXSTAbstractSynthesis" xil_pn:start_ts="1558897330">
|
||||
<status xil_pn:value="SuccessfullyRun"/>
|
||||
<status xil_pn:value="ReadyToRun"/>
|
||||
</transform>
|
||||
<transform xil_pn:end_ts="1558897330" xil_pn:name="TRAN_schematicsToHdl" xil_pn:prop_ck="5081391373936803697" xil_pn:start_ts="1558897330">
|
||||
<status xil_pn:value="SuccessfullyRun"/>
|
||||
<status xil_pn:value="ReadyToRun"/>
|
||||
</transform>
|
||||
<transform xil_pn:end_ts="1573773896" xil_pn:in_ck="-2520376148396271922" xil_pn:name="TRANEXT_xstsynthesize_xc9500xl" xil_pn:prop_ck="-5742752562858310575" xil_pn:start_ts="1573773885">
|
||||
<status xil_pn:value="SuccessfullyRun"/>
|
||||
<status xil_pn:value="WarningsGenerated"/>
|
||||
<status xil_pn:value="ReadyToRun"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP.lso"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP.ngc"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP.ngr"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP.prj"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP.stx"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP.syr"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP.xst"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP_vhdl.prj"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP_xst.xrpt"/>
|
||||
<outfile xil_pn:name="_xmsgs/xst.xmsgs"/>
|
||||
<outfile xil_pn:name="webtalk_pn.xml"/>
|
||||
<outfile xil_pn:name="xst"/>
|
||||
</transform>
|
||||
<transform xil_pn:end_ts="1558897342" xil_pn:in_ck="176569500195729039" xil_pn:name="TRAN_compileBCD2" xil_pn:prop_ck="-8537920303570934858" xil_pn:start_ts="1558897342">
|
||||
<status xil_pn:value="SuccessfullyRun"/>
|
||||
<status xil_pn:value="ReadyToRun"/>
|
||||
</transform>
|
||||
<transform xil_pn:end_ts="1573773904" xil_pn:in_ck="-8547647177936735053" xil_pn:name="TRAN_ngdbuild" xil_pn:prop_ck="6932115226421322529" xil_pn:start_ts="1573773896">
|
||||
<status xil_pn:value="SuccessfullyRun"/>
|
||||
<status xil_pn:value="ReadyToRun"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP.bld"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP.ngd"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP_ngdbuild.xrpt"/>
|
||||
<outfile xil_pn:name="_ngo"/>
|
||||
<outfile xil_pn:name="_xmsgs/ngdbuild.xmsgs"/>
|
||||
</transform>
|
||||
<transform xil_pn:end_ts="1573773944" xil_pn:in_ck="-2520376148396280667" xil_pn:name="TRANEXT_vm6File_xc9500xl" xil_pn:prop_ck="-1014768965495450326" xil_pn:start_ts="1573773904">
|
||||
<status xil_pn:value="SuccessfullyRun"/>
|
||||
<status xil_pn:value="WarningsGenerated"/>
|
||||
<status xil_pn:value="ReadyToRun"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP.gyd"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP.mfd"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP.nga"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP.pad"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP.pnx"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP.rpt"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP.tim"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP.tspec"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP.vm6"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP.xml"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP_build.xml"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP_html"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP_pad.csv"/>
|
||||
</transform>
|
||||
<transform xil_pn:end_ts="1573773946" xil_pn:in_ck="-2520376148396271803" xil_pn:name="TRANEXT_crtProg_xc9500" xil_pn:prop_ck="-6294026017969277533" xil_pn:start_ts="1573773944">
|
||||
<status xil_pn:value="SuccessfullyRun"/>
|
||||
<status xil_pn:value="ReadyToRun"/>
|
||||
<outfile xil_pn:name="LAN_IDE_CP.jed"/>
|
||||
</transform>
|
||||
<transform xil_pn:end_ts="1558977170" xil_pn:in_ck="-2520376148396285089" xil_pn:name="TRAN_impactProgrammingTool_CPLD" xil_pn:prop_ck="-3598488201878296819" xil_pn:start_ts="1558977170">
|
||||
<status xil_pn:value="SuccessfullyRun"/>
|
||||
<status xil_pn:value="ReadyToRun"/>
|
||||
<status xil_pn:value="OutOfDateForInputs"/>
|
||||
<status xil_pn:value="InputChanged"/>
|
||||
</transform>
|
||||
<transform xil_pn:end_ts="1558897401" xil_pn:in_ck="-2520376148396271803" xil_pn:name="TRAN_timRpt" xil_pn:prop_ck="111903974446" xil_pn:start_ts="1558897398">
|
||||
<status xil_pn:value="AbortedRun"/>
|
||||
<status xil_pn:value="WarningsGenerated"/>
|
||||
<status xil_pn:value="ReadyToRun"/>
|
||||
<status xil_pn:value="OutOfDateForInputs"/>
|
||||
<status xil_pn:value="InputChanged"/>
|
||||
</transform>
|
||||
</transforms>
|
||||
|
||||
</generated_project>
|
||||
Binary file not shown.
@@ -0,0 +1,55 @@
|
||||
<xsl:stylesheet
|
||||
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
|
||||
version="1.0">
|
||||
|
||||
<xsl:output method="html"/>
|
||||
|
||||
<xsl:template match="/">
|
||||
<b>
|
||||
<xsl:text>Current iMPACT Usage Statistics.</xsl:text>
|
||||
<br></br>
|
||||
<xsl:text>Copyright (c) 1995-2010 Xilinx, Inc. All rights reserved.</xsl:text>
|
||||
</b>
|
||||
<br></br>
|
||||
<br></br>
|
||||
<xsl:text>This page displays the current iMPACT device usage statistics that will be sent to Xilinx using WebTalk.</xsl:text>
|
||||
|
||||
<table width = "100%" border="1" CELLSPACING="0" cols="50% 50%">
|
||||
<xsl:for-each select="document/application/section">
|
||||
<tr>
|
||||
<th COLSPAN="2" BGCOLOR="#99CCFF"><xsl:value-of select="@name"/></th>
|
||||
|
||||
</tr>
|
||||
<xsl:for-each select="property">
|
||||
<tr>
|
||||
<td><xsl:value-of select="@name"/></td>
|
||||
|
||||
<td><xsl:value-of select="@value"/></td>
|
||||
</tr>
|
||||
|
||||
|
||||
</xsl:for-each>
|
||||
|
||||
<xsl:for-each select="item">
|
||||
<tr>
|
||||
<td COLSPAN="2" BGCOLOR="#FFFF99"><b><xsl:value-of select="@name"/></b></td>
|
||||
</tr>
|
||||
<xsl:value-of select="@value"/>
|
||||
<xsl:for-each select="property">
|
||||
<tr>
|
||||
<td><xsl:value-of select="@name"/></td>
|
||||
<td><xsl:value-of select="@value"/> </td>
|
||||
</tr>
|
||||
|
||||
</xsl:for-each>
|
||||
|
||||
</xsl:for-each>
|
||||
</xsl:for-each>
|
||||
</table>
|
||||
</xsl:template>
|
||||
|
||||
</xsl:stylesheet>
|
||||
|
||||
<!--
|
||||
<xsl:if test="position() != last()"> <h1><xsl:text> </xsl:text></h1></xsl:if>
|
||||
-->
|
||||
@@ -0,0 +1,8 @@
|
||||
INTSTYLE=impact
|
||||
INFILE=C:\Users\Matze\Amiga\Hardwarehacks\Zorro-LAN-IDE\Logic\LAN_IDE_V2\impact.xsl
|
||||
OUTFILE=C:\Users\Matze\Amiga\Hardwarehacks\Zorro-LAN-IDE\Logic\LAN_IDE_V2\impact.xsl
|
||||
FAMILY=Single
|
||||
PART=Single
|
||||
WORKINGDIR=C:\Users\Matze\Amiga\Hardwarehacks\Zorro-LAN-IDE\Logic\LAN_IDE_V2
|
||||
LICENSE=iMPACT
|
||||
USER_INFO=iMPACT
|
||||
@@ -1,7 +1,7 @@
|
||||
<?xml version='1.0' encoding='UTF-8'?>
|
||||
<report-views version="2.0" >
|
||||
<header>
|
||||
<DateModified>2019-03-02T19:53:28</DateModified>
|
||||
<DateModified>2019-11-15T00:18:39</DateModified>
|
||||
<ModuleName>LAN_IDE_CP</ModuleName>
|
||||
<SummaryTimeStamp>Unknown</SummaryTimeStamp>
|
||||
<SavedFilePath>C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/iseconfig/LAN_IDE_CP.xreport</SavedFilePath>
|
||||
|
||||
@@ -13,7 +13,7 @@
|
||||
</SelectedItems>
|
||||
<ScrollbarPosition orientation="vertical" >0</ScrollbarPosition>
|
||||
<ScrollbarPosition orientation="horizontal" >0</ScrollbarPosition>
|
||||
<ViewHeaderState orientation="horizontal" >000000ff0000000000000001000000010000000000000000000000000000000002020000000100000001000000640000015a000000020000000000000000000000000200000064ffffffff0000008100000003000000020000015a0000000100000003000000000000000100000003</ViewHeaderState>
|
||||
<ViewHeaderState orientation="horizontal" >000000ff000000000000000100000001000000000000000000000000000000000202000000010000000100000064000002ea000000020000000000000000000000000200000064ffffffff000000810000000300000002000002ea0000000100000003000000000000000100000003</ViewHeaderState>
|
||||
<UserChangedColumnWidths orientation="horizontal" >true</UserChangedColumnWidths>
|
||||
<CurrentItem>LAN_IDE_CP - Behavioral (C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP-Z2v2.vhd)</CurrentItem>
|
||||
</ItemView>
|
||||
@@ -29,7 +29,7 @@
|
||||
</SelectedItems>
|
||||
<ScrollbarPosition orientation="vertical" >0</ScrollbarPosition>
|
||||
<ScrollbarPosition orientation="horizontal" >0</ScrollbarPosition>
|
||||
<ViewHeaderState orientation="horizontal" >000000ff000000000000000100000001000000000000000000000000000000000000000000000000f8000000010000000100000000000000000000000064ffffffff000000810000000000000001000000f80000000100000000</ViewHeaderState>
|
||||
<ViewHeaderState orientation="horizontal" >000000ff000000000000000100000001000000000000000000000000000000000000000000000001b0000000010000000100000000000000000000000064ffffffff000000810000000000000001000001b00000000100000000</ViewHeaderState>
|
||||
<UserChangedColumnWidths orientation="horizontal" >false</UserChangedColumnWidths>
|
||||
<CurrentItem></CurrentItem>
|
||||
</ItemView>
|
||||
@@ -42,7 +42,7 @@
|
||||
<ScrollbarPosition orientation="horizontal" >0</ScrollbarPosition>
|
||||
<ViewHeaderState orientation="horizontal" >000000ff000000000000000100000000000000000100000000000000000000000000000000000003a3000000040101000100000000000000000000000064ffffffff0000008100000000000000040000008b00000001000000000000009d0000000100000000000000660000000100000000000002150000000100000000</ViewHeaderState>
|
||||
<UserChangedColumnWidths orientation="horizontal" >false</UserChangedColumnWidths>
|
||||
<CurrentItem>LAN_IDE_CP-Z2v2.vhd</CurrentItem>
|
||||
<CurrentItem>C:\Users\Matze\Amiga\Hardwarehacks\Zorro-LAN-IDE\Logic\LAN_IDE_V2\LAN_IDE_CP-Z2v2.vhd</CurrentItem>
|
||||
</ItemView>
|
||||
<ItemView guiview="Library" >
|
||||
<ClosedNodes>
|
||||
@@ -64,13 +64,13 @@
|
||||
<ClosedNode>User Constraints</ClosedNode>
|
||||
</ClosedNodes>
|
||||
<SelectedItems>
|
||||
<SelectedItem></SelectedItem>
|
||||
<SelectedItem/>
|
||||
</SelectedItems>
|
||||
<ScrollbarPosition orientation="vertical" >0</ScrollbarPosition>
|
||||
<ScrollbarPosition orientation="horizontal" >0</ScrollbarPosition>
|
||||
<ViewHeaderState orientation="horizontal" >000000ff000000000000000100000001000000000000000000000000000000000000000000000000f8000000010000000100000000000000000000000064ffffffff000000810000000000000001000000f80000000100000000</ViewHeaderState>
|
||||
<UserChangedColumnWidths orientation="horizontal" >false</UserChangedColumnWidths>
|
||||
<CurrentItem></CurrentItem>
|
||||
<CurrentItem/>
|
||||
</ItemView>
|
||||
<ItemView engineview="SynthesisOnly" sourcetype="" guiview="Process" >
|
||||
<ClosedNodes>
|
||||
|
||||
@@ -0,0 +1,89 @@
|
||||
<?xml version='1.0' encoding='utf-8'?>
|
||||
<!--This is an ISE project configuration file.-->
|
||||
<!--It holds project specific layout data for the projectmgr plugin.-->
|
||||
<!--Copyright (c) 1995-2009 Xilinx, Inc. All rights reserved.-->
|
||||
<Project version="2" owner="projectmgr" name="LAN_IDEz3v2" >
|
||||
<!--This is an ISE project configuration file.-->
|
||||
<ItemView engineview="SynthesisOnly" guiview="Source" compilemode="AutoCompile" >
|
||||
<ClosedNodes>
|
||||
<ClosedNodesVersion>2</ClosedNodesVersion>
|
||||
</ClosedNodes>
|
||||
<SelectedItems>
|
||||
<SelectedItem>LAN_IDE_CP - Behavioral (C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP.vhd)</SelectedItem>
|
||||
</SelectedItems>
|
||||
<ScrollbarPosition orientation="vertical" >0</ScrollbarPosition>
|
||||
<ScrollbarPosition orientation="horizontal" >0</ScrollbarPosition>
|
||||
<ViewHeaderState orientation="horizontal" >000000ff000000000000000100000001000000000000000000000000000000000202000000010000000100000064000002cc000000020000000000000000000000000200000064ffffffff000000810000000300000002000002cc0000000100000003000000000000000100000003</ViewHeaderState>
|
||||
<UserChangedColumnWidths orientation="horizontal" >true</UserChangedColumnWidths>
|
||||
<CurrentItem>LAN_IDE_CP - Behavioral (C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE_V2/LAN_IDE_CP.vhd)</CurrentItem>
|
||||
</ItemView>
|
||||
<ItemView engineview="SynthesisOnly" sourcetype="DESUT_VHDL_ARCHITECTURE" guiview="Process" >
|
||||
<ClosedNodes>
|
||||
<ClosedNodesVersion>1</ClosedNodesVersion>
|
||||
<ClosedNode>Design Utilities</ClosedNode>
|
||||
<ClosedNode>Implement Design/Optional Implementation Tools</ClosedNode>
|
||||
<ClosedNode>Implement Design/Synthesize - XST</ClosedNode>
|
||||
<ClosedNode>User Constraints</ClosedNode>
|
||||
</ClosedNodes>
|
||||
<SelectedItems>
|
||||
<SelectedItem></SelectedItem>
|
||||
</SelectedItems>
|
||||
<ScrollbarPosition orientation="vertical" >0</ScrollbarPosition>
|
||||
<ScrollbarPosition orientation="horizontal" >0</ScrollbarPosition>
|
||||
<ViewHeaderState orientation="horizontal" >000000ff000000000000000100000001000000000000000000000000000000000000000000000001b0000000010000000100000000000000000000000064ffffffff000000810000000000000001000001b00000000100000000</ViewHeaderState>
|
||||
<UserChangedColumnWidths orientation="horizontal" >false</UserChangedColumnWidths>
|
||||
<CurrentItem></CurrentItem>
|
||||
</ItemView>
|
||||
<ItemView guiview="File" >
|
||||
<ClosedNodes>
|
||||
<ClosedNodesVersion>1</ClosedNodesVersion>
|
||||
</ClosedNodes>
|
||||
<SelectedItems/>
|
||||
<ScrollbarPosition orientation="vertical" >0</ScrollbarPosition>
|
||||
<ScrollbarPosition orientation="horizontal" >0</ScrollbarPosition>
|
||||
<ViewHeaderState orientation="horizontal" >000000ff000000000000000100000000000000000100000000000000000000000000000000000003a3000000040101000100000000000000000000000064ffffffff0000008100000000000000040000008100000001000000000000009d00000001000000000000006600000001000000000000021f0000000100000000</ViewHeaderState>
|
||||
<UserChangedColumnWidths orientation="horizontal" >false</UserChangedColumnWidths>
|
||||
<CurrentItem>C:\Users\Matze\Amiga\Hardwarehacks\Zorro-LAN-IDE\Logic\LAN_IDE_V2\LAN_IDE_CP.vhd</CurrentItem>
|
||||
</ItemView>
|
||||
<ItemView guiview="Library" >
|
||||
<ClosedNodes>
|
||||
<ClosedNodesVersion>1</ClosedNodesVersion>
|
||||
<ClosedNode>work</ClosedNode>
|
||||
</ClosedNodes>
|
||||
<SelectedItems/>
|
||||
<ScrollbarPosition orientation="vertical" >0</ScrollbarPosition>
|
||||
<ScrollbarPosition orientation="horizontal" >0</ScrollbarPosition>
|
||||
<ViewHeaderState orientation="horizontal" >000000ff00000000000000010000000000000000010000000000000000000000000000000000000109000000010001000100000000000000000000000064ffffffff000000810000000000000001000001090000000100000000</ViewHeaderState>
|
||||
<UserChangedColumnWidths orientation="horizontal" >false</UserChangedColumnWidths>
|
||||
<CurrentItem>work</CurrentItem>
|
||||
</ItemView>
|
||||
<ItemView engineview="SynthesisOnly" sourcetype="DESUT_UCF" guiview="Process" >
|
||||
<ClosedNodes>
|
||||
<ClosedNodesVersion>1</ClosedNodesVersion>
|
||||
</ClosedNodes>
|
||||
<SelectedItems>
|
||||
<SelectedItem>User Constraints</SelectedItem>
|
||||
</SelectedItems>
|
||||
<ScrollbarPosition orientation="vertical" >0</ScrollbarPosition>
|
||||
<ScrollbarPosition orientation="horizontal" >0</ScrollbarPosition>
|
||||
<ViewHeaderState orientation="horizontal" >000000ff000000000000000100000001000000000000000000000000000000000000000000000000f8000000010000000100000000000000000000000064ffffffff000000810000000000000001000000f80000000100000000</ViewHeaderState>
|
||||
<UserChangedColumnWidths orientation="horizontal" >false</UserChangedColumnWidths>
|
||||
<CurrentItem>User Constraints</CurrentItem>
|
||||
</ItemView>
|
||||
<ItemView engineview="SynthesisOnly" sourcetype="" guiview="Process" >
|
||||
<ClosedNodes>
|
||||
<ClosedNodesVersion>1</ClosedNodesVersion>
|
||||
<ClosedNode>Design Utilities/Compile HDL Simulation Libraries</ClosedNode>
|
||||
</ClosedNodes>
|
||||
<SelectedItems>
|
||||
<SelectedItem>Design Utilities</SelectedItem>
|
||||
</SelectedItems>
|
||||
<ScrollbarPosition orientation="vertical" >0</ScrollbarPosition>
|
||||
<ScrollbarPosition orientation="horizontal" >0</ScrollbarPosition>
|
||||
<ViewHeaderState orientation="horizontal" >000000ff000000000000000100000001000000000000000000000000000000000000000000000000f8000000010000000100000000000000000000000064ffffffff000000810000000000000001000000f80000000100000000</ViewHeaderState>
|
||||
<UserChangedColumnWidths orientation="horizontal" >false</UserChangedColumnWidths>
|
||||
<CurrentItem>Design Utilities</CurrentItem>
|
||||
</ItemView>
|
||||
<SourceProcessView>000000ff00000000000000020000011b0000011b01000000050100000002</SourceProcessView>
|
||||
<CurrentView>Implementation</CurrentView>
|
||||
</Project>
|
||||
Binary file not shown.
@@ -0,0 +1,9 @@
|
||||
Release 14.7 - WebTalk (P.20131013)
|
||||
Copyright (c) 1995-2010 Xilinx, Inc. All rights reserved.
|
||||
|
||||
WebTalk Summary
|
||||
----------------
|
||||
INFO:WebTalk:3 - WebTalk is disabled.
|
||||
|
||||
INFO:WebTalk:9 - WebTalk Install setting is OFF.
|
||||
INFO:WebTalk:6 - WebTalk User setting is ON.
|
||||
Reference in New Issue
Block a user