Update in Firmware (pure Z2-AC but LAN becomes Z3) and new pcb
This commit is contained in:
MHeinrichs
@@ -0,0 +1,460 @@
|
||||
--------------------------------------------------------------------------------
|
||||
-- Company:
|
||||
-- Engineer:
|
||||
--
|
||||
-- Create Date: 23:59:54 01/15/2017
|
||||
-- Design Name:
|
||||
-- Module Name: C:/Users/Matze/Amiga/Hardwarehacks/Zorro-LAN-IDE/Logic/LAN_IDE/LAN_IDE_CP_TB.vhd
|
||||
-- Project Name: LAN_IDE
|
||||
-- Target Device:
|
||||
-- Tool versions:
|
||||
-- Description:
|
||||
--
|
||||
-- VHDL Test Bench Created by ISE for module: LAN_IDE_CP
|
||||
--
|
||||
-- Dependencies:
|
||||
--
|
||||
-- Revision:
|
||||
-- Revision 0.01 - File Created
|
||||
-- Additional Comments:
|
||||
--
|
||||
-- Notes:
|
||||
-- This testbench has been automatically generated using types std_logic and
|
||||
-- std_logic_vector for the ports of the unit under test. Xilinx recommends
|
||||
-- that these types always be used for the top-level I/O of a design in order
|
||||
-- to guarantee that the testbench will bind correctly to the post-implementation
|
||||
-- simulation model.
|
||||
--------------------------------------------------------------------------------
|
||||
LIBRARY ieee;
|
||||
USE ieee.std_logic_1164.ALL;
|
||||
|
||||
-- Uncomment the following library declaration if using
|
||||
-- arithmetic functions with Signed or Unsigned values
|
||||
--USE ieee.numeric_std.ALL;
|
||||
|
||||
ENTITY LAN_IDE_CP_TB IS
|
||||
END LAN_IDE_CP_TB;
|
||||
|
||||
ARCHITECTURE behavior OF LAN_IDE_CP_TB IS
|
||||
|
||||
-- Component Declaration for the Unit Under Test (UUT)
|
||||
|
||||
COMPONENT LAN_IDE_CP
|
||||
PORT(
|
||||
A : INOUT std_logic_vector(23 downto 1);
|
||||
D : INOUT std_logic_vector(15 downto 0);
|
||||
DQ : INOUT std_logic_vector(15 downto 0);
|
||||
A_LAN : OUT std_logic_vector(13 downto 0);
|
||||
OWN : OUT std_logic;
|
||||
SLAVE : OUT std_logic;
|
||||
CFOUT : OUT std_logic;
|
||||
CFIN : IN std_logic;
|
||||
C1 : IN std_logic;
|
||||
C3 : IN std_logic;
|
||||
MTCR : IN std_logic;
|
||||
OVR : OUT std_logic;
|
||||
BERR : IN std_logic;
|
||||
MTACK : OUT std_logic;
|
||||
DS0 : IN std_logic;
|
||||
DTACK : OUT std_logic;
|
||||
UDS : IN std_logic;
|
||||
LDS : IN std_logic;
|
||||
AS : IN std_logic;
|
||||
RW : IN std_logic;
|
||||
Z3 : IN std_logic;
|
||||
DS1 : IN std_logic;
|
||||
FCS : IN std_logic;
|
||||
RESET : IN std_logic;
|
||||
INT_OUT : OUT std_logic;
|
||||
AUTOBOOT_OFF : IN std_logic;
|
||||
ROM_B : OUT std_logic_vector(1 downto 0);
|
||||
ROM_OE : OUT std_logic;
|
||||
IDE_WAIT : IN std_logic;
|
||||
CLK_EXT : IN std_logic;
|
||||
IDE_W : OUT std_logic;
|
||||
IDE_R : OUT std_logic;
|
||||
IDE_A : OUT std_logic_vector(2 downto 0);
|
||||
IDE_CS : OUT std_logic_vector(1 downto 0);
|
||||
LAN_CFG : OUT std_logic_vector(4 downto 1);
|
||||
LAN_RD : OUT std_logic;
|
||||
LAN_CS : OUT std_logic;
|
||||
LAN_WRH : OUT std_logic;
|
||||
LAN_WRL : OUT std_logic;
|
||||
LAN_INT : IN std_logic;
|
||||
CP_RD : OUT std_logic;
|
||||
CP_WE : OUT std_logic;
|
||||
CP_CS : OUT std_logic;
|
||||
CP_IRQ : IN std_logic
|
||||
);
|
||||
END COMPONENT;
|
||||
|
||||
|
||||
--Inputs
|
||||
signal CFIN : std_logic := '0';
|
||||
signal C1 : std_logic := '0';
|
||||
signal C3 : std_logic := '0';
|
||||
signal MTCR : std_logic := '0';
|
||||
signal BERR : std_logic := '0';
|
||||
signal DS0 : std_logic := '0';
|
||||
signal UDS : std_logic := '0';
|
||||
signal LDS : std_logic := '0';
|
||||
signal AS : std_logic := '0';
|
||||
signal RW : std_logic := '0';
|
||||
signal Z3 : std_logic := '0';
|
||||
signal DS1 : std_logic := '0';
|
||||
signal FCS : std_logic := '0';
|
||||
signal RESET : std_logic := '0';
|
||||
signal AUTOBOOT_OFF : std_logic := '0';
|
||||
signal IDE_WAIT : std_logic := '0';
|
||||
signal CLK_EXT : std_logic := '0';
|
||||
signal LAN_INT : std_logic := '0';
|
||||
signal CP_IRQ : std_logic := '0';
|
||||
|
||||
--BiDirs
|
||||
signal A : std_logic_vector(23 downto 1);
|
||||
signal D : std_logic_vector(15 downto 0);
|
||||
signal DQ : std_logic_vector(15 downto 0);
|
||||
|
||||
--Outputs
|
||||
signal A_LAN : std_logic_vector(13 downto 0);
|
||||
signal OWN : std_logic;
|
||||
signal SLAVE : std_logic;
|
||||
signal CFOUT : std_logic;
|
||||
signal OVR : std_logic;
|
||||
signal MTACK : std_logic;
|
||||
signal DTACK : std_logic;
|
||||
signal INT_OUT : std_logic;
|
||||
signal ROM_B : std_logic_vector(1 downto 0);
|
||||
signal ROM_OE : std_logic;
|
||||
signal IDE_W : std_logic;
|
||||
signal IDE_R : std_logic;
|
||||
signal IDE_A : std_logic_vector(2 downto 0);
|
||||
signal IDE_CS : std_logic_vector(1 downto 0);
|
||||
signal LAN_CFG : std_logic_vector(4 downto 1);
|
||||
signal LAN_RD : std_logic;
|
||||
signal LAN_CS : std_logic;
|
||||
signal LAN_WRH : std_logic;
|
||||
signal LAN_WRL : std_logic;
|
||||
signal CP_RD : std_logic;
|
||||
signal CP_WE : std_logic;
|
||||
signal CP_CS : std_logic;
|
||||
|
||||
-- Clock period definitions
|
||||
signal AMIGA_CLK :std_logic;
|
||||
|
||||
constant CLK_EXT_period : time := 40 ns;
|
||||
constant CLK_AMIGA_period : time := 140 ns;
|
||||
|
||||
|
||||
BEGIN
|
||||
|
||||
-- Instantiate the Unit Under Test (UUT)
|
||||
uut: LAN_IDE_CP PORT MAP (
|
||||
A => A,
|
||||
D => D,
|
||||
DQ => DQ,
|
||||
A_LAN => A_LAN,
|
||||
OWN => OWN,
|
||||
SLAVE => SLAVE,
|
||||
CFOUT => CFOUT,
|
||||
CFIN => CFIN,
|
||||
C1 => C1,
|
||||
C3 => C3,
|
||||
MTCR => MTCR,
|
||||
OVR => OVR,
|
||||
BERR => BERR,
|
||||
MTACK => MTACK,
|
||||
DS0 => DS0,
|
||||
DTACK => DTACK,
|
||||
UDS => UDS,
|
||||
LDS => LDS,
|
||||
AS => AS,
|
||||
RW => RW,
|
||||
Z3 => Z3,
|
||||
DS1 => DS1,
|
||||
FCS => FCS,
|
||||
RESET => RESET,
|
||||
INT_OUT => INT_OUT,
|
||||
AUTOBOOT_OFF => AUTOBOOT_OFF,
|
||||
ROM_B => ROM_B,
|
||||
ROM_OE => ROM_OE,
|
||||
IDE_WAIT => IDE_WAIT,
|
||||
CLK_EXT => CLK_EXT,
|
||||
IDE_W => IDE_W,
|
||||
IDE_R => IDE_R,
|
||||
IDE_A => IDE_A,
|
||||
IDE_CS => IDE_CS,
|
||||
LAN_CFG => LAN_CFG,
|
||||
LAN_RD => LAN_RD,
|
||||
LAN_CS => LAN_CS,
|
||||
LAN_WRH => LAN_WRH,
|
||||
LAN_WRL => LAN_WRL,
|
||||
LAN_INT => LAN_INT,
|
||||
CP_RD => CP_RD,
|
||||
CP_WE => CP_WE,
|
||||
CP_CS => CP_CS,
|
||||
CP_IRQ => CP_IRQ
|
||||
);
|
||||
|
||||
AMIGA_CLK <= not (C1 xor C3);
|
||||
|
||||
-- Clock process definitions
|
||||
CLK_EXT_process :process
|
||||
begin
|
||||
CLK_EXT <= '0';
|
||||
wait for CLK_EXT_period/2;
|
||||
CLK_EXT <= '1';
|
||||
wait for CLK_EXT_period/2;
|
||||
end process;
|
||||
|
||||
-- Clock process definitions
|
||||
CLK_13_process :process
|
||||
begin
|
||||
C1 <= '1';
|
||||
C3 <= '0';
|
||||
wait for CLK_AMIGA_period/2;
|
||||
C1 <= '0';
|
||||
C3 <= '0';
|
||||
wait for CLK_AMIGA_period/2;
|
||||
C1 <= '0';
|
||||
C3 <= '1';
|
||||
wait for CLK_AMIGA_period/2;
|
||||
C1 <= '1';
|
||||
C3 <= '1';
|
||||
wait for CLK_AMIGA_period/2;
|
||||
end process;
|
||||
|
||||
|
||||
-- Stimulus process
|
||||
stim_proc: process
|
||||
begin
|
||||
-- hold reset state for 100 ns.
|
||||
RESET <='0';
|
||||
AS <='1';
|
||||
BERR <='1';
|
||||
D <= (others=>'Z');
|
||||
DQ <= (others=>'Z');
|
||||
A <= (others=>'Z');
|
||||
RW <='1';
|
||||
UDS <='1';
|
||||
LDS <='1';
|
||||
CFIN <='0';
|
||||
|
||||
MTCR <='1';
|
||||
DS0 <='1';
|
||||
Z3 <='0';
|
||||
DS1 <='1';
|
||||
FCS <='1';
|
||||
AUTOBOOT_OFF <='1';
|
||||
IDE_WAIT <='1';
|
||||
LAN_INT <='1';
|
||||
CP_IRQ <='1';
|
||||
|
||||
wait for 100 ns;
|
||||
reset <='1';
|
||||
|
||||
wait for CLK_AMIGA_period*10;
|
||||
|
||||
--make a quick autoconfig
|
||||
wait until rising_edge(AMIGA_CLK); --S0
|
||||
RW <='1';
|
||||
wait until falling_edge(AMIGA_CLK); --S1
|
||||
A(23 downto 16) <= x"E8";
|
||||
A(15 downto 8) <= x"00";
|
||||
A(7 downto 1) <= "0100100";
|
||||
wait until rising_edge(AMIGA_CLK); --S2
|
||||
AS<='0';
|
||||
RW<='0';
|
||||
wait until falling_edge(AMIGA_CLK); --S3
|
||||
D <= x"EAEA"; --address config 1
|
||||
wait until rising_edge(AMIGA_CLK); --S4
|
||||
UDS <='0';
|
||||
wait until falling_edge(AMIGA_CLK); --S5
|
||||
wait until rising_edge(AMIGA_CLK); --S6
|
||||
wait until falling_edge(AMIGA_CLK); --S7
|
||||
AS <='1';
|
||||
UDS <='1';
|
||||
LDS <='1';
|
||||
D <= (others=>'Z');
|
||||
|
||||
|
||||
wait until rising_edge(AMIGA_CLK); --S0
|
||||
RW <='1';
|
||||
wait until falling_edge(AMIGA_CLK); --S1
|
||||
A(23 downto 16) <= x"E8";
|
||||
A(15 downto 8) <= x"00";
|
||||
A(7 downto 1) <= "0100100";
|
||||
wait until rising_edge(AMIGA_CLK); --S2
|
||||
AS<='0';
|
||||
RW<='0';
|
||||
wait until falling_edge(AMIGA_CLK); --S3
|
||||
D <= x"EBEB"; --address config 2
|
||||
wait until rising_edge(AMIGA_CLK); --S4
|
||||
UDS <='0';
|
||||
wait until falling_edge(AMIGA_CLK); --S5
|
||||
wait until rising_edge(AMIGA_CLK); --S6
|
||||
wait until falling_edge(AMIGA_CLK); --S7
|
||||
AS <='1';
|
||||
UDS <='1';
|
||||
LDS <='1';
|
||||
D <= (others=>'Z');
|
||||
|
||||
wait until rising_edge(AMIGA_CLK); --S0
|
||||
RW <='1';
|
||||
wait until falling_edge(AMIGA_CLK); --S1
|
||||
A(23 downto 16) <= x"E8";
|
||||
A(15 downto 8) <= x"00";
|
||||
A(7 downto 1) <= "0100100";
|
||||
wait until rising_edge(AMIGA_CLK); --S2
|
||||
AS<='0';
|
||||
RW<='0';
|
||||
wait until falling_edge(AMIGA_CLK); --S3
|
||||
D <= x"ECEC"; --address config 3
|
||||
wait until rising_edge(AMIGA_CLK); --S4
|
||||
UDS <='0';
|
||||
wait until falling_edge(AMIGA_CLK); --S5
|
||||
wait until rising_edge(AMIGA_CLK); --S6
|
||||
wait until falling_edge(AMIGA_CLK); --S7
|
||||
AS <='1';
|
||||
UDS <='1';
|
||||
LDS <='1';
|
||||
D <= (others=>'Z');
|
||||
|
||||
--now do some I/O on LAN
|
||||
wait until rising_edge(AMIGA_CLK); --S0
|
||||
RW <='1';
|
||||
wait until falling_edge(AMIGA_CLK); --S1
|
||||
A(23 downto 16) <= x"EA";
|
||||
A(15 downto 8) <= x"00";
|
||||
A(7 downto 1) <= "0100100";
|
||||
wait until rising_edge(AMIGA_CLK); --S2
|
||||
AS<='0';
|
||||
RW<='0';
|
||||
wait until falling_edge(AMIGA_CLK); --S3
|
||||
D <= x"B00B"; --Testdata
|
||||
wait until rising_edge(AMIGA_CLK); --S4
|
||||
UDS <='0';
|
||||
LDS <='0';
|
||||
wait until falling_edge(AMIGA_CLK); --S5
|
||||
wait until rising_edge(AMIGA_CLK); --S6
|
||||
wait until falling_edge(AMIGA_CLK); --S7
|
||||
AS <='1';
|
||||
UDS <='1';
|
||||
LDS <='1';
|
||||
D <= (others=>'Z');
|
||||
|
||||
wait until rising_edge(AMIGA_CLK); --S0
|
||||
RW <='1';
|
||||
wait until falling_edge(AMIGA_CLK); --S1
|
||||
A(23 downto 16) <= x"EA";
|
||||
A(15 downto 8) <= x"00";
|
||||
A(7 downto 1) <= "0100100";
|
||||
wait until rising_edge(AMIGA_CLK); --S2
|
||||
AS<='0';
|
||||
RW<='1';
|
||||
UDS <='0';
|
||||
LDS <='0';
|
||||
wait until falling_edge(AMIGA_CLK); --S3
|
||||
wait until rising_edge(AMIGA_CLK); --S4
|
||||
wait until falling_edge(AMIGA_CLK); --S5
|
||||
wait until rising_edge(AMIGA_CLK); --S6
|
||||
wait until falling_edge(AMIGA_CLK); --S7
|
||||
AS <='1';
|
||||
UDS <='1';
|
||||
LDS <='1';
|
||||
D <= (others=>'Z');
|
||||
|
||||
--now do some I/O on CS
|
||||
wait until rising_edge(AMIGA_CLK); --S0
|
||||
RW <='1';
|
||||
wait until falling_edge(AMIGA_CLK); --S1
|
||||
A(23 downto 16) <= x"EB";
|
||||
A(15 downto 8) <= x"00";
|
||||
A(7 downto 1) <= "0100100";
|
||||
wait until rising_edge(AMIGA_CLK); --S2
|
||||
AS<='0';
|
||||
RW<='0';
|
||||
wait until falling_edge(AMIGA_CLK); --S3
|
||||
D <= x"B00B"; --Testdata
|
||||
wait until rising_edge(AMIGA_CLK); --S4
|
||||
UDS <='0';
|
||||
LDS <='0';
|
||||
wait until falling_edge(AMIGA_CLK); --S5
|
||||
wait until rising_edge(AMIGA_CLK); --S6
|
||||
wait until falling_edge(AMIGA_CLK); --S7
|
||||
AS <='1';
|
||||
UDS <='1';
|
||||
LDS <='1';
|
||||
D <= (others=>'Z');
|
||||
|
||||
wait until rising_edge(AMIGA_CLK); --S0
|
||||
RW <='1';
|
||||
wait until falling_edge(AMIGA_CLK); --S1
|
||||
A(23 downto 16) <= x"EB";
|
||||
A(15 downto 8) <= x"00";
|
||||
A(7 downto 1) <= "0100100";
|
||||
wait until rising_edge(AMIGA_CLK); --S2
|
||||
AS<='0';
|
||||
RW<='1';
|
||||
UDS <='0';
|
||||
LDS <='0';
|
||||
wait until falling_edge(AMIGA_CLK); --S3
|
||||
wait until rising_edge(AMIGA_CLK); --S4
|
||||
wait until falling_edge(AMIGA_CLK); --S5
|
||||
wait until rising_edge(AMIGA_CLK); --S6
|
||||
wait until falling_edge(AMIGA_CLK); --S7
|
||||
AS <='1';
|
||||
UDS <='1';
|
||||
LDS <='1';
|
||||
D <= (others=>'Z');
|
||||
|
||||
--now do some I/O on IDE
|
||||
wait until rising_edge(AMIGA_CLK); --S0
|
||||
RW <='1';
|
||||
wait until falling_edge(AMIGA_CLK); --S1
|
||||
A(23 downto 16) <= x"EC";
|
||||
A(15 downto 8) <= x"00";
|
||||
A(7 downto 1) <= "0100100";
|
||||
wait until rising_edge(AMIGA_CLK); --S2
|
||||
AS<='0';
|
||||
RW<='0';
|
||||
wait until falling_edge(AMIGA_CLK); --S3
|
||||
D <= x"B00B"; --Testdata
|
||||
wait until rising_edge(AMIGA_CLK); --S4
|
||||
UDS <='0';
|
||||
LDS <='0';
|
||||
wait until falling_edge(AMIGA_CLK); --S5
|
||||
wait until rising_edge(AMIGA_CLK); --S6
|
||||
wait until falling_edge(AMIGA_CLK); --S7
|
||||
AS <='1';
|
||||
UDS <='1';
|
||||
LDS <='1';
|
||||
D <= (others=>'Z');
|
||||
|
||||
wait until rising_edge(AMIGA_CLK); --S0
|
||||
RW <='1';
|
||||
wait until falling_edge(AMIGA_CLK); --S1
|
||||
A(23 downto 16) <= x"EC";
|
||||
A(15 downto 8) <= x"00";
|
||||
A(7 downto 1) <= "0100100";
|
||||
wait until rising_edge(AMIGA_CLK); --S2
|
||||
AS<='0';
|
||||
RW<='1';
|
||||
UDS <='0';
|
||||
LDS <='0';
|
||||
wait until falling_edge(AMIGA_CLK); --S3
|
||||
wait until rising_edge(AMIGA_CLK); --S4
|
||||
wait until falling_edge(AMIGA_CLK); --S5
|
||||
wait until rising_edge(AMIGA_CLK); --S6
|
||||
wait until falling_edge(AMIGA_CLK); --S7
|
||||
AS <='1';
|
||||
UDS <='1';
|
||||
LDS <='1';
|
||||
D <= (others=>'Z');
|
||||
|
||||
wait until rising_edge(AMIGA_CLK);
|
||||
wait until falling_edge(AMIGA_CLK);
|
||||
wait;
|
||||
end process;
|
||||
|
||||
END;
|
||||
Reference in New Issue
Block a user