cpldfit: version P.68d Xilinx Inc.
Fitter Report
Design Name: LAN_IDE_CP Date: 12-28-2016, 11:39PM
Device Used: XC95144XL-10-TQ144
Fitting Status: Successful
************************* Mapped Resource Summary **************************
Macrocells Product Terms Function Block Registers Pins
Used/Tot Used/Tot Inps Used/Tot Used/Tot Used/Tot
111/144 ( 77%) 320 /720 ( 44%) 225/432 ( 52%) 35 /144 ( 24%) 105/117 ( 90%)
** Function Block Resources **
Function Mcells FB Inps Pterms IO
Block Used/Tot Used/Tot Used/Tot Used/Tot
FB1 18/18* 35/54 38/90 14/15
FB2 18/18* 31/54 31/90 15/15*
FB3 12/18 30/54 66/90 13/15
FB4 18/18* 31/54 30/90 15/15*
FB5 6/18 2/54 6/90 14/14*
FB6 18/18* 33/54 46/90 12/13
FB7 16/18 28/54 58/90 11/15
FB8 5/18 35/54 45/90 11/15
----- ----- ----- -----
111/144 225/432 320/720 105/117
* - Resource is exhausted
** Global Control Resources **
Global clock net(s) unused.
Global output enable net(s) unused.
Signal 'RESET' mapped onto global set/reset net GSR.
** Pin Resources **
Signal Type Required Mapped | Pin Type Used Total
------------------------------------|------------------------------------
Input : 32 32 | I/O : 99 109
Output : 40 40 | GCK/IO : 1 3
Bidirectional : 32 32 | GTS/IO : 4 4
GCK : 0 0 | GSR/IO : 1 1
GTS : 0 0 |
GSR : 1 1 |
---- ----
Total 105 105
** Power Data **
There are 111 macrocells in high performance mode (MCHP).
There are 0 macrocells in low power mode (MCLP).
End of Mapped Resource Summary
************************** Errors and Warnings ***************************
WARNING:Cpld - Unable to retrieve the path to the iSE Project Repository. Will
use the default filename of 'LAN_IDE_CP.ise'.
INFO:Cpld - Inferring BUFG constraint for signal 'CLK_EXT' based upon the LOC
constraint 'P30'. It is recommended that you declare this BUFG explicitedly
in your design. Note that for certain device families the output of a BUFG
constraint can not drive a gated clock, and the BUFG constraint will be
ignored.
WARNING:Cpld:936 - The output buffer 'OVR_OBUF' is missing an input and will be
deleted.
WARNING:Cpld:936 - The output buffer 'MTACK_OBUF' is missing an input and will
be deleted.
WARNING:Cpld:1007 - Removing unused input(s) 'A<15>'. The input(s) are unused
after optimization. Please verify functionality via simulation.
WARNING:Cpld:1007 - Removing unused input(s) 'CLK_EXT'. The input(s) are unused
after optimization. Please verify functionality via simulation.
WARNING:Cpld:1007 - Removing unused input(s) 'DS0'. The input(s) are unused
after optimization. Please verify functionality via simulation.
WARNING:Cpld:1007 - Removing unused input(s) 'DS1'. The input(s) are unused
after optimization. Please verify functionality via simulation.
WARNING:Cpld:1007 - Removing unused input(s) 'FCS'. The input(s) are unused
after optimization. Please verify functionality via simulation.
WARNING:Cpld:1007 - Removing unused input(s) 'IDE_WAIT'. The input(s) are
unused after optimization. Please verify functionality via simulation.
WARNING:Cpld:1007 - Removing unused input(s) 'LAN_INT'. The input(s) are unused
after optimization. Please verify functionality via simulation.
WARNING:Cpld:1007 - Removing unused input(s) 'MTCR'. The input(s) are unused
after optimization. Please verify functionality via simulation.
WARNING:Cpld:1007 - Removing unused input(s) 'Z3'. The input(s) are unused
after optimization. Please verify functionality via simulation.
************************* Summary of Mapped Logic ************************
** 72 Outputs **
Signal Total Total Loc Pin Pin Pin Pwr Slew Reg Init
Name Pts Inps No. Type Use Mode Rate State
IDE_CS<1> 1 1 FB1_1 23 I/O O STD FAST
D<7> 2 5 FB1_2 16 I/O I/O STD FAST
D<1> 2 5 FB1_3 17 I/O I/O STD FAST
IDE_A<2> 1 1 FB1_4 25 I/O O STD FAST
D<8> 2 5 FB1_5 19 I/O I/O STD FAST
D<5> 2 5 FB1_6 20 I/O I/O STD FAST
D<4> 2 5 FB1_8 21 I/O I/O STD FAST
IDE_CS<0> 1 1 FB1_9 22 I/O O STD FAST
IDE_A<0> 1 1 FB1_11 24 I/O O STD FAST
IDE_A<1> 1 1 FB1_12 26 I/O O STD FAST
IDE_R 2 6 FB1_14 27 I/O O STD FAST RESET
IDE_W 2 5 FB1_15 28 I/O O STD FAST RESET
ROM_OE 2 6 FB1_16 35 I/O O STD FAST RESET
A_LAN<9> 1 1 FB2_1 142 I/O O STD FAST
A_LAN<0> 1 1 FB2_4 4 I/O O STD FAST
D<0> 2 5 FB2_5 2 GTS/I/O I/O STD FAST
A_LAN<1> 1 1 FB2_6 3 GTS/I/O O STD FAST
A_LAN<3> 1 1 FB2_8 5 GTS/I/O O STD FAST
A_LAN<2> 1 1 FB2_9 6 GTS/I/O O STD FAST
A_LAN<5> 1 1 FB2_10 7 I/O O STD FAST
A_LAN<4> 1 1 FB2_11 9 I/O O STD FAST
A_LAN<7> 1 1 FB2_12 10 I/O O STD FAST
LAN_CFG<1> 0 0 FB2_13 12 I/O O STD FAST
A_LAN<6> 1 1 FB2_14 11 I/O O STD FAST
LAN_CFG<3> 0 0 FB2_15 13 I/O O STD FAST
D<6> 2 5 FB2_16 14 I/O I/O STD FAST
D<3> 2 5 FB2_17 15 I/O I/O STD FAST
D<2> 2 5 FB3_1 39 I/O I/O STD FAST
INT_OUT 1 1 FB3_2 32 GCK/I/O O STD FAST
D<10> 2 5 FB3_3 41 I/O I/O STD FAST
D<12> 5 6 FB3_4 44 I/O I/O STD FAST
CP_CS 0 0 FB3_6 34 I/O O STD FAST
D<14> 5 6 FB3_7 46 I/O I/O STD FAST
D<9> 2 5 FB3_9 40 I/O I/O STD FAST
D<15> 5 6 FB3_10 48 I/O I/O STD FAST
D<11> 2 5 FB3_11 43 I/O I/O STD FAST
D<13> 5 6 FB3_12 45 I/O I/O STD FAST
DQ<0> 2 3 FB4_1 118 I/O I/O STD FAST
DQ<6> 2 3 FB4_2 126 I/O I/O STD FAST
LAN_CS 0 0 FB4_3 133 I/O O STD FAST
Signal Total Total Loc Pin Pin Pin Pwr Slew Reg Init
Name Pts Inps No. Type Use Mode Rate State
DQ<8> 2 3 FB4_5 128 I/O I/O STD FAST
DQ<10> 2 3 FB4_6 129 I/O I/O STD FAST
DQ<12> 2 3 FB4_8 130 I/O I/O STD FAST
DQ<14> 2 3 FB4_9 131 I/O I/O STD FAST
LAN_CFG<2> 0 0 FB4_10 135 I/O O STD FAST
LAN_WRH 1 4 FB4_11 132 I/O O STD FAST
LAN_RD 1 3 FB4_12 134 I/O O STD FAST
A_LAN<12> 1 1 FB4_13 137 I/O O STD FAST
A_LAN<13> 1 1 FB4_14 136 I/O O STD FAST
A_LAN<10> 1 1 FB4_15 138 I/O O STD FAST
A_LAN<11> 1 1 FB4_16 139 I/O O STD FAST
A_LAN<8> 1 1 FB4_17 140 I/O O STD FAST
ROM_B<0> 0 0 FB5_10 68 I/O O STD FAST
CP_WE 0 0 FB5_13 70 I/O O STD FAST
ROM_B<1> 0 0 FB5_17 69 I/O O STD FAST
SLAVE 2 4 FB6_2 106 I/O O STD FAST
LAN_CFG<4> 0 0 FB6_5 110 I/O O STD FAST
DQ<15> 2 3 FB6_6 112 I/O I/O STD FAST
DQ<13> 2 3 FB6_8 113 I/O I/O STD FAST
DQ<9> 2 3 FB6_9 116 I/O I/O STD FAST
DQ<11> 2 3 FB6_10 115 I/O I/O STD FAST
DQ<3> 2 3 FB6_11 119 I/O I/O STD FAST
DQ<2> 2 3 FB6_12 120 I/O I/O STD FAST
DQ<5> 2 3 FB6_14 121 I/O I/O STD FAST
DQ<4> 2 3 FB6_15 124 I/O I/O STD FAST
DQ<1> 2 3 FB6_16 117 I/O I/O STD FAST
DQ<7> 2 3 FB6_17 125 I/O I/O STD FAST
CP_RD 0 0 FB7_2 71 I/O O STD FAST
LAN_WRL 1 4 FB7_6 76 I/O O STD FAST
DTACK 0 0 FB7_12 85 I/O O STD FAST
OWN 1 1 FB8_16 107 I/O O STD FAST
CFOUT 1 3 FB8_17 105 I/O O STD FAST
** 39 Buried Nodes **
Signal Total Total Loc Pwr Reg Init
Name Pts Inps Mode State
SLAVE_OBUF__$INT 2 4 FB1_7 STD
IDE_ENABLE 3 6 FB1_10 STD RESET
IDE_BASEADR<2> 4 17 FB1_13 STD RESET
IDE_BASEADR<1> 4 17 FB1_17 STD RESET
IDE_BASEADR<0> 4 17 FB1_18 STD RESET
IDE_BASEADR<6> 4 17 FB2_2 STD RESET
IDE_BASEADR<5> 4 17 FB2_3 STD RESET
IDE_BASEADR<4> 4 17 FB2_7 STD RESET
IDE_BASEADR<3> 4 17 FB2_18 STD RESET
Dout1<0> 18 16 FB3_14 STD RESET
Dout1<1> 19 15 FB3_17 STD RESET
SHUT_UP<2> 3 16 FB4_4 STD RESET
LAN_BASEADR<6> 4 15 FB4_7 STD RESET
IDE_BASEADR<7> 4 17 FB4_18 STD RESET
lan/lan_CLKF 2 2 FB5_15 STD
ide/ide_CLKF 2 2 FB5_16 STD
autoconfig/autoconfig_CLKF 2 2 FB5_18 STD
LAN_BASEADR<7> 4 15 FB6_1 STD RESET
LAN_BASEADR<5> 4 15 FB6_3 STD RESET
LAN_BASEADR<3> 4 15 FB6_4 STD RESET
LAN_BASEADR<2> 4 15 FB6_7 STD RESET
LAN_BASEADR<1> 4 15 FB6_13 STD RESET
LAN_BASEADR<0> 4 15 FB6_18 STD RESET
Dout1<2> 16 15 FB7_1 STD RESET
$OpTx$$OpTx$FX_DC$84_INV$97 1 2 FB7_3 STD
SHUT_UP<2>/SHUT_UP<2>_CLKF 2 2 FB7_4 STD
AUTO_CONFIG_DONE<2> 2 2 FB7_5 STD RESET
AUTO_CONFIG_DONE<1> 2 2 FB7_7 STD RESET
AUTO_CONFIG_DONE<0> 2 2 FB7_8 STD RESET
SHUT_UP<0> 3 14 FB7_9 STD RESET
AUTO_CONFIG_DONE_CYCLE<2> 3 15 FB7_10 STD RESET
AUTO_CONFIG_DONE_CYCLE<1> 3 14 FB7_11 STD RESET
LAN_BASEADR<4> 4 15 FB7_13 STD RESET
Dout1<3> 15 15 FB7_15 STD RESET
lan/lan_RSTF__$INT 1 2 FB7_16 STD
AUTO_CONFIG_DONE_CYCLE<0> 3 13 FB7_17 STD RESET
lan 19 19 FB8_4 STD RESET
autoconfig 5 14 FB8_14 STD RESET
ide 19 19 FB8_18 STD RESET
** 33 Inputs **
Signal Loc Pin Pin Pin
Name No. Type Use
CP_IRQ FB1_10 31 I/O I
RESET FB2_2 143 GSR/I/O GSR/I
A<5> FB3_14 49 I/O I
A<4> FB3_15 50 I/O I
A<6> FB3_17 51 I/O I
A<3> FB5_2 52 I/O I
A<10> FB5_3 59 I/O I
A<7> FB5_5 53 I/O I
A<2> FB5_6 54 I/O I
A<14> FB5_7 66 I/O I
A<8> FB5_8 56 I/O I
A<1> FB5_9 57 I/O I
A<9> FB5_11 58 I/O I
A<11> FB5_12 60 I/O I
A<12> FB5_14 61 I/O I
A<13> FB5_15 64 I/O I
AUTOBOOT_OFF FB7_3 75 I/O I
AS FB7_9 80 I/O I
LDS FB7_11 82 I/O I
UDS FB7_13 81 I/O I
A<23> FB7_14 86 I/O I
A<22> FB7_15 87 I/O I
RW FB7_16 83 I/O I
A<21> FB7_17 88 I/O I
A<20> FB8_2 91 I/O I
A<17> FB8_3 95 I/O I
A<16> FB8_4 97 I/O I
A<19> FB8_5 92 I/O I
A<18> FB8_8 94 I/O I
BERR FB8_11 98 I/O I
C1 FB8_13 103 I/O I
C3 FB8_14 102 I/O I
CFIN FB8_15 104 I/O I
Legend:
Pin No. - ~ - User Assigned
************************** Function Block Details ************************
Legend:
Total Pt - Total product terms used by the macrocell signal
Imp Pt - Product terms imported from other macrocells
Exp Pt - Product terms exported to other macrocells
in direction shown
Unused Pt - Unused local product terms remaining in macrocell
Loc - Location where logic was mapped in device
Pin Type/Use - I - Input GCK - Global Clock
O - Output GTS - Global Output Enable
(b) - Buried macrocell GSR - Global Set/Reset
X - Signal used as input to the macrocell logic.
Pin No. - ~ - User Assigned
*********************************** FB1 ***********************************
Number of function block inputs used/remaining: 35/19
Number of signals used by logic mapping into function block: 35
Signal Total Imp Exp Unused Loc Pin Pin Pin
Name Pt Pt Pt Pt # Type Use
IDE_CS<1> 1 0 0 4 FB1_1 23 I/O O
D<7> 2 0 0 3 FB1_2 16 I/O I/O
D<1> 2 0 0 3 FB1_3 17 I/O I/O
IDE_A<2> 1 0 0 4 FB1_4 25 I/O O
D<8> 2 0 0 3 FB1_5 19 I/O I/O
D<5> 2 0 0 3 FB1_6 20 I/O I/O
SLAVE_OBUF__$INT 2 0 0 3 FB1_7 (b) (b)
D<4> 2 0 0 3 FB1_8 21 I/O I/O
IDE_CS<0> 1 0 0 4 FB1_9 22 I/O O
IDE_ENABLE 3 0 0 2 FB1_10 31 I/O I
IDE_A<0> 1 0 0 4 FB1_11 24 I/O O
IDE_A<1> 1 0 0 4 FB1_12 26 I/O O
IDE_BASEADR<2> 4 0 0 1 FB1_13 (b) (b)
IDE_R 2 0 0 3 FB1_14 27 I/O O
IDE_W 2 0 0 3 FB1_15 28 I/O O
ROM_OE 2 0 0 3 FB1_16 35 I/O O
IDE_BASEADR<1> 4 0 0 1 FB1_17 30 GCK/I/O (b)
IDE_BASEADR<0> 4 0 0 1 FB1_18 (b) (b)
Signals Used by Logic in Function Block
1: $OpTx$$OpTx$FX_DC$84_INV$97 13: A<5> 25: DQ<7>.PIN
2: AS 14: A<6> 26: DQ<5>.PIN
3: AUTO_CONFIG_DONE<0> 15: A<9> 27: DQ<4>.PIN
4: AUTO_CONFIG_DONE<1> 16: A<10> 28: DQ<1>.PIN
5: AUTO_CONFIG_DONE<2> 17: D<10>.PIN 29: RESET
6: A<1> 18: D<8>.PIN 30: RW
7: A<11> 19: D<9>.PIN 31: SHUT_UP<2>/SHUT_UP<2>_CLKF
8: A<12> 20: IDE_BASEADR<0> 32: UDS
9: A<13> 21: IDE_BASEADR<1> 33: autoconfig
10: A<2> 22: IDE_BASEADR<2> 34: ide
11: A<3> 23: IDE_ENABLE 35: lan
12: A<4> 24: DQ<8>.PIN
Signal 1 2 3 4 FB
Name 0----+----0----+----0----+----0----+----0 Inputs
IDE_CS<1> ........X............................... 1
D<7> XX......................X....X....X..... 5
D<1> XX.........................X.X....X..... 5
IDE_A<2> ......X................................. 1
D<8> XX.....................X.....X....X..... 5
D<5> XX.......................X...X....X..... 5
SLAVE_OBUF__$INT .X..............................XXX..... 4
D<4> XX........................X..X....X..... 5
IDE_CS<0> .......X................................ 1
IDE_ENABLE .X....................X.....XXX..X...... 6
IDE_A<0> ..............X......................... 1
IDE_A<1> ...............X........................ 1
IDE_BASEADR<2> .XXXXX...XXXXX..X....X......XXXXX....... 17
IDE_R .X....................X.....XXX..X...... 6
IDE_W .X..........................XXX..X...... 5
ROM_OE .X....................X.....XXX..X...... 6
IDE_BASEADR<1> .XXXXX...XXXXX....X.X.......XXXXX....... 17
IDE_BASEADR<0> .XXXXX...XXXXX...X.X........XXXXX....... 17
0----+----1----+----2----+----3----+----4
0 0 0 0
*********************************** FB2 ***********************************
Number of function block inputs used/remaining: 31/23
Number of signals used by logic mapping into function block: 31
Signal Total Imp Exp Unused Loc Pin Pin Pin
Name Pt Pt Pt Pt # Type Use
A_LAN<9> 1 0 0 4 FB2_1 142 I/O O
IDE_BASEADR<6> 4 0 0 1 FB2_2 143 GSR/I/O GSR/I
IDE_BASEADR<5> 4 0 0 1 FB2_3 (b) (b)
A_LAN<0> 1 0 0 4 FB2_4 4 I/O O
D<0> 2 0 0 3 FB2_5 2 GTS/I/O I/O
A_LAN<1> 1 0 0 4 FB2_6 3 GTS/I/O O
IDE_BASEADR<4> 4 0 0 1 FB2_7 (b) (b)
A_LAN<3> 1 0 0 4 FB2_8 5 GTS/I/O O
A_LAN<2> 1 0 0 4 FB2_9 6 GTS/I/O O
A_LAN<5> 1 0 0 4 FB2_10 7 I/O O
A_LAN<4> 1 0 0 4 FB2_11 9 I/O O
A_LAN<7> 1 0 0 4 FB2_12 10 I/O O
LAN_CFG<1> 0 0 0 5 FB2_13 12 I/O O
A_LAN<6> 1 0 0 4 FB2_14 11 I/O O
LAN_CFG<3> 0 0 0 5 FB2_15 13 I/O O
D<6> 2 0 0 3 FB2_16 14 I/O I/O
D<3> 2 0 0 3 FB2_17 15 I/O I/O
IDE_BASEADR<3> 4 0 0 1 FB2_18 (b) (b)
Signals Used by Logic in Function Block
1: $OpTx$$OpTx$FX_DC$84_INV$97 12: A<7> 22: IDE_BASEADR<6>
2: AS 13: A<8> 23: DQ<6>.PIN
3: AUTO_CONFIG_DONE<0> 14: A<10> 24: DQ<3>.PIN
4: AUTO_CONFIG_DONE<1> 15: D<11>.PIN 25: DQ<0>.PIN
5: AUTO_CONFIG_DONE<2> 16: D<12>.PIN 26: RESET
6: A<1> 17: D<13>.PIN 27: RW
7: A<2> 18: D<14>.PIN 28: SHUT_UP<2>/SHUT_UP<2>_CLKF
8: A<3> 19: IDE_BASEADR<3> 29: UDS
9: A<4> 20: IDE_BASEADR<4> 30: autoconfig
10: A<5> 21: IDE_BASEADR<5> 31: lan
11: A<6>
Signal 1 2 3 4 FB
Name 0----+----0----+----0----+----0----+----0 Inputs
A_LAN<9> .............X.......................... 1
IDE_BASEADR<6> .XXXXXXXXXX......X...X...XXXXX.......... 17
IDE_BASEADR<5> .XXXXXXXXXX.....X...X....XXXXX.......... 17
A_LAN<0> .....X.................................. 1
D<0> XX......................X.X...X......... 5
A_LAN<1> ......X................................. 1
IDE_BASEADR<4> .XXXXXXXXXX....X...X.....XXXXX.......... 17
A_LAN<3> ........X............................... 1
A_LAN<2> .......X................................ 1
A_LAN<5> ..........X............................. 1
A_LAN<4> .........X.............................. 1
A_LAN<7> ............X........................... 1
LAN_CFG<1> ........................................ 0
A_LAN<6> ...........X............................ 1
LAN_CFG<3> ........................................ 0
D<6> XX....................X...X...X......... 5
D<3> XX.....................X..X...X......... 5
IDE_BASEADR<3> .XXXXXXXXXX...X...X......XXXXX.......... 17
0----+----1----+----2----+----3----+----4
0 0 0 0
*********************************** FB3 ***********************************
Number of function block inputs used/remaining: 30/24
Number of signals used by logic mapping into function block: 30
Signal Total Imp Exp Unused Loc Pin Pin Pin
Name Pt Pt Pt Pt # Type Use
D<2> 2 1<- /\4 0 FB3_1 39 I/O I/O
INT_OUT 1 0 /\1 3 FB3_2 32 GCK/I/O O
D<10> 2 0 0 3 FB3_3 41 I/O I/O
D<12> 5 0 0 0 FB3_4 44 I/O I/O
(unused) 0 0 0 5 FB3_5 33 I/O
CP_CS 0 0 0 5 FB3_6 34 I/O O
D<14> 5 0 0 0 FB3_7 46 I/O I/O
(unused) 0 0 0 5 FB3_8 38 GCK/I/O
D<9> 2 0 0 3 FB3_9 40 I/O I/O
D<15> 5 0 0 0 FB3_10 48 I/O I/O
D<11> 2 0 \/3 0 FB3_11 43 I/O I/O
D<13> 5 3<- \/3 0 FB3_12 45 I/O I/O
(unused) 0 0 \/5 0 FB3_13 (b) (b)
Dout1<0> 18 13<- 0 0 FB3_14 49 I/O I
(unused) 0 0 /\5 0 FB3_15 50 I/O I
(unused) 0 0 \/5 0 FB3_16 (b) (b)
Dout1<1> 19 14<- 0 0 FB3_17 51 I/O I
(unused) 0 0 /\5 0 FB3_18 (b) (b)
Signals Used by Logic in Function Block
1: $OpTx$$OpTx$FX_DC$84_INV$97 11: A<5> 21: DQ<12>.PIN
2: AS 12: A<6> 22: DQ<11>.PIN
3: AUTOBOOT_OFF 13: CP_IRQ 23: DQ<10>.PIN
4: AUTO_CONFIG_DONE<0> 14: Dout1<0> 24: DQ<9>.PIN
5: AUTO_CONFIG_DONE<1> 15: Dout1<1> 25: DQ<2>.PIN
6: AUTO_CONFIG_DONE<2> 16: Dout1<2> 26: RESET
7: A<1> 17: Dout1<3> 27: RW
8: A<2> 18: DQ<15>.PIN 28: SHUT_UP<2>/SHUT_UP<2>_CLKF
9: A<3> 19: DQ<14>.PIN 29: autoconfig
10: A<4> 20: DQ<13>.PIN 30: lan
Signal 1 2 3 4 FB
Name 0----+----0----+----0----+----0----+----0 Inputs
D<2> XX......................X.X..X.......... 5
INT_OUT ............X........................... 1
D<10> XX....................X...X..X.......... 5
D<12> XX...........X......X.....X..X.......... 6
CP_CS ........................................ 0
D<14> XX.............X..X.......X..X.......... 6
D<9> XX.....................X..X..X.......... 5
D<15> XX..............XX........X..X.......... 6
D<11> XX...................X....X..X.......... 5
D<13> XX............X....X......X..X.......... 6
Dout1<0> .XXXXXXXXXXX.X...........XXXX........... 16
Dout1<1> .X.XXXXXXXXX..X..........XXXX........... 15
0----+----1----+----2----+----3----+----4
0 0 0 0
*********************************** FB4 ***********************************
Number of function block inputs used/remaining: 31/23
Number of signals used by logic mapping into function block: 31
Signal Total Imp Exp Unused Loc Pin Pin Pin
Name Pt Pt Pt Pt # Type Use
DQ<0> 2 0 0 3 FB4_1 118 I/O I/O
DQ<6> 2 0 0 3 FB4_2 126 I/O I/O
LAN_CS 0 0 0 5 FB4_3 133 I/O O
SHUT_UP<2> 3 0 0 2 FB4_4 (b) (b)
DQ<8> 2 0 0 3 FB4_5 128 I/O I/O
DQ<10> 2 0 0 3 FB4_6 129 I/O I/O
LAN_BASEADR<6> 4 0 0 1 FB4_7 (b) (b)
DQ<12> 2 0 0 3 FB4_8 130 I/O I/O
DQ<14> 2 0 0 3 FB4_9 131 I/O I/O
LAN_CFG<2> 0 0 0 5 FB4_10 135 I/O O
LAN_WRH 1 0 0 4 FB4_11 132 I/O O
LAN_RD 1 0 0 4 FB4_12 134 I/O O
A_LAN<12> 1 0 0 4 FB4_13 137 I/O O
A_LAN<13> 1 0 0 4 FB4_14 136 I/O O
A_LAN<10> 1 0 0 4 FB4_15 138 I/O O
A_LAN<11> 1 0 0 4 FB4_16 139 I/O O
A_LAN<8> 1 0 0 4 FB4_17 140 I/O O
IDE_BASEADR<7> 4 0 0 1 FB4_18 (b) (b)
Signals Used by Logic in Function Block
1: AS 12: A<4> 22: D<8>.PIN
2: AUTO_CONFIG_DONE<0> 13: A<5> 23: IDE_BASEADR<7>
3: AUTO_CONFIG_DONE<1> 14: A<6> 24: LAN_BASEADR<6>
4: AUTO_CONFIG_DONE<2> 15: A<9> 25: RESET
5: A<1> 16: D<0>.PIN 26: RW
6: A<11> 17: D<10>.PIN 27: SHUT_UP<2>
7: A<12> 18: D<12>.PIN 28: SHUT_UP<2>/SHUT_UP<2>_CLKF
8: A<13> 19: D<14>.PIN 29: UDS
9: A<14> 20: D<15>.PIN 30: autoconfig
10: A<2> 21: D<6>.PIN 31: lan
11: A<3>
Signal 1 2 3 4 FB
Name 0----+----0----+----0----+----0----+----0 Inputs
DQ<0> X..............X.........X.............. 3
DQ<6> X...................X....X.............. 3
LAN_CS ........................................ 0
SHUT_UP<2> XXXXX....XXXXX..........XXXXXX.......... 16
DQ<8> X....................X...X.............. 3
DQ<10> X...............X........X.............. 3
LAN_BASEADR<6> XX..X....XXXXX....X....XXX.XXX.......... 15
DQ<12> X................X.......X.............. 3
DQ<14> X.................X......X.............. 3
LAN_CFG<2> ........................................ 0
LAN_WRH X........................X..X.X......... 4
LAN_RD X........................X....X......... 3
A_LAN<12> .......X................................ 1
A_LAN<13> ........X............................... 1
A_LAN<10> .....X.................................. 1
A_LAN<11> ......X................................. 1
A_LAN<8> ..............X......................... 1
IDE_BASEADR<7> XXXXX....XXXXX.....X..X.XX.XXX.......... 17
0----+----1----+----2----+----3----+----4
0 0 0 0
*********************************** FB5 ***********************************
Number of function block inputs used/remaining: 2/52
Number of signals used by logic mapping into function block: 2
Signal Total Imp Exp Unused Loc Pin Pin Pin
Name Pt Pt Pt Pt # Type Use
(unused) 0 0 0 5 FB5_1 (b)
(unused) 0 0 0 5 FB5_2 52 I/O I
(unused) 0 0 0 5 FB5_3 59 I/O I
(unused) 0 0 0 5 FB5_4 (b)
(unused) 0 0 0 5 FB5_5 53 I/O I
(unused) 0 0 0 5 FB5_6 54 I/O I
(unused) 0 0 0 5 FB5_7 66 I/O I
(unused) 0 0 0 5 FB5_8 56 I/O I
(unused) 0 0 0 5 FB5_9 57 I/O I
ROM_B<0> 0 0 0 5 FB5_10 68 I/O O
(unused) 0 0 0 5 FB5_11 58 I/O I
(unused) 0 0 0 5 FB5_12 60 I/O I
CP_WE 0 0 0 5 FB5_13 70 I/O O
(unused) 0 0 0 5 FB5_14 61 I/O I
lan/lan_CLKF 2 0 0 3 FB5_15 64 I/O I
ide/ide_CLKF 2 0 0 3 FB5_16 (b) (b)
ROM_B<1> 0 0 0 5 FB5_17 69 I/O O
autoconfig/autoconfig_CLKF
2 0 0 3 FB5_18 (b) (b)
Signals Used by Logic in Function Block
1: C1 2: C3
Signal 1 2 3 4 FB
Name 0----+----0----+----0----+----0----+----0 Inputs
ROM_B<0> ........................................ 0
CP_WE ........................................ 0
lan/lan_CLKF XX...................................... 2
ide/ide_CLKF XX...................................... 2
ROM_B<1> ........................................ 0
autoconfig/autoconfig_CLKF
XX...................................... 2
0----+----1----+----2----+----3----+----4
0 0 0 0
*********************************** FB6 ***********************************
Number of function block inputs used/remaining: 33/21
Number of signals used by logic mapping into function block: 33
Signal Total Imp Exp Unused Loc Pin Pin Pin
Name Pt Pt Pt Pt # Type Use
LAN_BASEADR<7> 4 0 0 1 FB6_1 (b) (b)
SLAVE 2 0 0 3 FB6_2 106 I/O O
LAN_BASEADR<5> 4 0 0 1 FB6_3 (b) (b)
LAN_BASEADR<3> 4 0 0 1 FB6_4 111 I/O (b)
LAN_CFG<4> 0 0 0 5 FB6_5 110 I/O O
DQ<15> 2 0 0 3 FB6_6 112 I/O I/O
LAN_BASEADR<2> 4 0 0 1 FB6_7 (b) (b)
DQ<13> 2 0 0 3 FB6_8 113 I/O I/O
DQ<9> 2 0 0 3 FB6_9 116 I/O I/O
DQ<11> 2 0 0 3 FB6_10 115 I/O I/O
DQ<3> 2 0 0 3 FB6_11 119 I/O I/O
DQ<2> 2 0 0 3 FB6_12 120 I/O I/O
LAN_BASEADR<1> 4 0 0 1 FB6_13 (b) (b)
DQ<5> 2 0 0 3 FB6_14 121 I/O I/O
DQ<4> 2 0 0 3 FB6_15 124 I/O I/O
DQ<1> 2 0 0 3 FB6_16 117 I/O I/O
DQ<7> 2 0 0 3 FB6_17 125 I/O I/O
LAN_BASEADR<0> 4 0 0 1 FB6_18 (b) (b)
Signals Used by Logic in Function Block
1: AS 12: D<15>.PIN 23: LAN_BASEADR<2>
2: AUTO_CONFIG_DONE<0> 13: D<1>.PIN 24: LAN_BASEADR<3>
3: A<1> 14: D<2>.PIN 25: LAN_BASEADR<5>
4: A<2> 15: D<3>.PIN 26: LAN_BASEADR<7>
5: A<3> 16: D<4>.PIN 27: RESET
6: A<4> 17: D<5>.PIN 28: RW
7: A<5> 18: D<7>.PIN 29: SHUT_UP<2>/SHUT_UP<2>_CLKF
8: A<6> 19: D<8>.PIN 30: UDS
9: D<10>.PIN 20: D<9>.PIN 31: autoconfig
10: D<11>.PIN 21: LAN_BASEADR<0> 32: ide
11: D<13>.PIN 22: LAN_BASEADR<1> 33: lan
Signal 1 2 3 4 FB
Name 0----+----0----+----0----+----0----+----0 Inputs
LAN_BASEADR<7> XXXXXXXX...X.............XXXXXX......... 15
SLAVE X.............................XXX....... 4
LAN_BASEADR<5> XXXXXXXX..X.............X.XXXXX......... 15
LAN_BASEADR<3> XXXXXXXX.X.............X..XXXXX......... 15
LAN_CFG<4> ........................................ 0
DQ<15> X..........X...............X............ 3
LAN_BASEADR<2> XXXXXXXXX.............X...XXXXX......... 15
DQ<13> X.........X................X............ 3
DQ<9> X..................X.......X............ 3
DQ<11> X........X.................X............ 3
DQ<3> X.............X............X............ 3
DQ<2> X............X.............X............ 3
LAN_BASEADR<1> XXXXXXXX...........X.X....XXXXX......... 15
DQ<5> X...............X..........X............ 3
DQ<4> X..............X...........X............ 3
DQ<1> X...........X..............X............ 3
DQ<7> X................X.........X............ 3
LAN_BASEADR<0> XXXXXXXX..........X.X.....XXXXX......... 15
0----+----1----+----2----+----3----+----4
0 0 0 0
*********************************** FB7 ***********************************
Number of function block inputs used/remaining: 28/26
Number of signals used by logic mapping into function block: 28
Signal Total Imp Exp Unused Loc Pin Pin Pin
Name Pt Pt Pt Pt # Type Use
Dout1<2> 16 11<- 0 0 FB7_1 (b) (b)
CP_RD 0 0 /\4 1 FB7_2 71 I/O O
$OpTx$$OpTx$FX_DC$84_INV$97
1 0 0 4 FB7_3 75 I/O I
SHUT_UP<2>/SHUT_UP<2>_CLKF
2 0 0 3 FB7_4 (b) (b)
AUTO_CONFIG_DONE<2> 2 0 0 3 FB7_5 74 I/O (b)
LAN_WRL 1 0 0 4 FB7_6 76 I/O O
AUTO_CONFIG_DONE<1> 2 0 0 3 FB7_7 77 I/O (b)
AUTO_CONFIG_DONE<0> 2 0 0 3 FB7_8 78 I/O (b)
SHUT_UP<0> 3 0 0 2 FB7_9 80 I/O I
AUTO_CONFIG_DONE_CYCLE<2>
3 0 0 2 FB7_10 79 I/O (b)
AUTO_CONFIG_DONE_CYCLE<1>
3 0 0 2 FB7_11 82 I/O I
DTACK 0 0 0 5 FB7_12 85 I/O O
LAN_BASEADR<4> 4 0 \/1 0 FB7_13 81 I/O I
(unused) 0 0 \/5 0 FB7_14 86 I/O I
Dout1<3> 15 10<- 0 0 FB7_15 87 I/O I
lan/lan_RSTF__$INT 1 0 /\4 0 FB7_16 83 I/O I
AUTO_CONFIG_DONE_CYCLE<0>
3 0 \/2 0 FB7_17 88 I/O I
(unused) 0 0 \/5 0 FB7_18 (b) (b)
Signals Used by Logic in Function Block
1: AS 11: A<4> 20: LAN_BASEADR<4>
2: AUTO_CONFIG_DONE<0> 12: A<5> 21: LDS
3: AUTO_CONFIG_DONE<1> 13: A<6> 22: RESET
4: AUTO_CONFIG_DONE<2> 14: BERR 23: RW
5: AUTO_CONFIG_DONE_CYCLE<0> 15: C1 24: SHUT_UP<0>
6: AUTO_CONFIG_DONE_CYCLE<1> 16: C3 25: SHUT_UP<2>/SHUT_UP<2>_CLKF
7: AUTO_CONFIG_DONE_CYCLE<2> 17: D<12>.PIN 26: UDS
8: A<1> 18: Dout1<2> 27: autoconfig
9: A<2> 19: Dout1<3> 28: lan
10: A<3>
Signal 1 2 3 4 FB
Name 0----+----0----+----0----+----0----+----0 Inputs
Dout1<2> XXXX...XXXXXX....X...XX.X.X............. 15
CP_RD ........................................ 0
$OpTx$$OpTx$FX_DC$84_INV$97
..........................XX............ 2
SHUT_UP<2>/SHUT_UP<2>_CLKF
..............XX........................ 2
AUTO_CONFIG_DONE<2> X.....X................................. 2
LAN_WRL X...................X.X....X............ 4
AUTO_CONFIG_DONE<1> X....X.................................. 2
AUTO_CONFIG_DONE<0> X...X................................... 2
SHUT_UP<0> XX.....XXXXXX........XXXXXX............. 14
AUTO_CONFIG_DONE_CYCLE<2>
XXXX..XX.XXXX........XX.XXX............. 15
AUTO_CONFIG_DONE_CYCLE<1>
XXX..X.X.XXXX........XX.XXX............. 14
DTACK ........................................ 0
LAN_BASEADR<4> XX.....XXXXXX...X..X.XX.XXX............. 15
Dout1<3> XXXX...XXXXXX.....X..XX.X.X............. 15
lan/lan_RSTF__$INT .............X.......X.................. 2
AUTO_CONFIG_DONE_CYCLE<0>
XX..X..X.XXXX........XX.XXX............. 13
0----+----1----+----2----+----3----+----4
0 0 0 0
*********************************** FB8 ***********************************
Number of function block inputs used/remaining: 35/19
Number of signals used by logic mapping into function block: 35
Signal Total Imp Exp Unused Loc Pin Pin Pin
Name Pt Pt Pt Pt # Type Use
(unused) 0 0 /\5 0 FB8_1 (b) (b)
(unused) 0 0 /\4 1 FB8_2 91 I/O I
(unused) 0 0 \/5 0 FB8_3 95 I/O I
lan 19 14<- 0 0 FB8_4 97 I/O I
(unused) 0 0 /\5 0 FB8_5 92 I/O I
(unused) 0 0 /\4 1 FB8_6 93 I/O (b)
(unused) 0 0 0 5 FB8_7 (b)
(unused) 0 0 0 5 FB8_8 94 I/O I
(unused) 0 0 0 5 FB8_9 96 I/O
(unused) 0 0 0 5 FB8_10 101 I/O
(unused) 0 0 0 5 FB8_11 98 I/O I
(unused) 0 0 0 5 FB8_12 100 I/O
(unused) 0 0 0 5 FB8_13 103 I/O I
autoconfig 5 0 0 0 FB8_14 102 I/O I
(unused) 0 0 0 5 FB8_15 104 I/O I
OWN 1 0 \/1 3 FB8_16 107 I/O O
CFOUT 1 1<- \/5 0 FB8_17 105 I/O O
ide 19 14<- 0 0 FB8_18 (b) (b)
Signals Used by Logic in Function Block
1: AUTO_CONFIG_DONE<0> 13: IDE_BASEADR<0> 25: LAN_BASEADR<4>
2: AUTO_CONFIG_DONE<1> 14: IDE_BASEADR<1> 26: LAN_BASEADR<5>
3: AUTO_CONFIG_DONE<2> 15: IDE_BASEADR<2> 27: LAN_BASEADR<6>
4: A<16> 16: IDE_BASEADR<3> 28: LAN_BASEADR<7>
5: A<17> 17: IDE_BASEADR<4> 29: SHUT_UP<0>
6: A<18> 18: IDE_BASEADR<5> 30: SHUT_UP<2>
7: A<19> 19: IDE_BASEADR<6> 31: SLAVE_OBUF__$INT
8: A<20> 20: IDE_BASEADR<7> 32: autoconfig/autoconfig_CLKF
9: A<21> 21: LAN_BASEADR<0> 33: ide/ide_CLKF
10: A<22> 22: LAN_BASEADR<1> 34: lan/lan_CLKF
11: A<23> 23: LAN_BASEADR<2> 35: lan/lan_RSTF__$INT
12: CFIN 24: LAN_BASEADR<3>
Signal 1 2 3 4 FB
Name 0----+----0----+----0----+----0----+----0 Inputs
lan ...XXXXXXXX.........XXXXXXXXX....XX..... 19
autoconfig XXXXXXXXXXXX...................X..X..... 14
OWN ..............................X......... 1
CFOUT XXX..................................... 3
ide ...XXXXXXXX.XXXXXXXX.........X..X.X..... 19
0----+----1----+----2----+----3----+----4
0 0 0 0
******************************* Equations ********************************
********** Mapped Logic **********
$OpTx$$OpTx$FX_DC$84_INV$97 <= (NOT autoconfig AND NOT lan);
FDCPE_AUTO_CONFIG_DONE0: FDCPE port map (AUTO_CONFIG_DONE(0),AUTO_CONFIG_DONE_CYCLE(0),AS,NOT RESET,'0');
FDCPE_AUTO_CONFIG_DONE1: FDCPE port map (AUTO_CONFIG_DONE(1),AUTO_CONFIG_DONE_CYCLE(1),AS,NOT RESET,'0');
FDCPE_AUTO_CONFIG_DONE2: FDCPE port map (AUTO_CONFIG_DONE(2),AUTO_CONFIG_DONE_CYCLE(2),AS,NOT RESET,'0');
FDCPE_AUTO_CONFIG_DONE_CYCLE0: FDCPE port map (AUTO_CONFIG_DONE_CYCLE(0),AUTO_CONFIG_DONE_CYCLE_D(0),SHUT_UP(2)/SHUT_UP(2)_CLKF,'0','0');
AUTO_CONFIG_DONE_CYCLE_D(0) <= ((RESET AND AUTO_CONFIG_DONE_CYCLE(0))
OR (NOT AS AND NOT RW AND RESET AND NOT AUTO_CONFIG_DONE(0) AND
autoconfig AND NOT A(4) AND NOT A(5) AND NOT A(1) AND A(3) AND A(6) AND NOT UDS));
FDCPE_AUTO_CONFIG_DONE_CYCLE1: FDCPE port map (AUTO_CONFIG_DONE_CYCLE(1),AUTO_CONFIG_DONE_CYCLE_D(1),SHUT_UP(2)/SHUT_UP(2)_CLKF,'0','0');
AUTO_CONFIG_DONE_CYCLE_D(1) <= ((RESET AND AUTO_CONFIG_DONE_CYCLE(1))
OR (NOT AS AND NOT RW AND RESET AND AUTO_CONFIG_DONE(0) AND
NOT AUTO_CONFIG_DONE(1) AND autoconfig AND NOT A(4) AND NOT A(5) AND NOT A(1) AND A(3) AND A(6) AND
NOT UDS));
FDCPE_AUTO_CONFIG_DONE_CYCLE2: FDCPE port map (AUTO_CONFIG_DONE_CYCLE(2),AUTO_CONFIG_DONE_CYCLE_D(2),SHUT_UP(2)/SHUT_UP(2)_CLKF,'0','0');
AUTO_CONFIG_DONE_CYCLE_D(2) <= ((RESET AND AUTO_CONFIG_DONE_CYCLE(2))
OR (NOT AS AND NOT RW AND RESET AND NOT AUTO_CONFIG_DONE(2) AND
AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND autoconfig AND NOT A(4) AND NOT A(5) AND
NOT A(1) AND A(3) AND A(6) AND NOT UDS));
A_LAN(0) <= A(1);
A_LAN(1) <= A(2);
A_LAN(2) <= A(3);
A_LAN(3) <= A(4);
A_LAN(4) <= A(5);
A_LAN(5) <= A(6);
A_LAN(6) <= A(7);
A_LAN(7) <= A(8);
A_LAN(8) <= A(9);
A_LAN(9) <= A(10);
A_LAN(10) <= A(11);
A_LAN(11) <= A(12);
A_LAN(12) <= A(13);
A_LAN(13) <= A(14);
CFOUT <= NOT ((AUTO_CONFIG_DONE(2) AND AUTO_CONFIG_DONE(0) AND
AUTO_CONFIG_DONE(1)));
CP_CS <= '0';
CP_RD <= '1';
CP_WE <= '1';
D_I(0) <= NOT ((NOT AS AND RW AND NOT DQ(0).PIN AND lan));
D(0) <= D_I(0) when D_OE(0) = '1' else 'Z';
D_OE(0) <= (NOT AS AND RW AND NOT $OpTx$$OpTx$FX_DC$84_INV$97);
D_I(1) <= NOT ((NOT AS AND RW AND NOT DQ(1).PIN AND lan));
D(1) <= D_I(1) when D_OE(1) = '1' else 'Z';
D_OE(1) <= (NOT AS AND RW AND NOT $OpTx$$OpTx$FX_DC$84_INV$97);
D_I(2) <= NOT ((NOT AS AND RW AND NOT DQ(2).PIN AND lan));
D(2) <= D_I(2) when D_OE(2) = '1' else 'Z';
D_OE(2) <= (NOT AS AND RW AND NOT $OpTx$$OpTx$FX_DC$84_INV$97);
D_I(3) <= NOT ((NOT AS AND RW AND NOT DQ(3).PIN AND lan));
D(3) <= D_I(3) when D_OE(3) = '1' else 'Z';
D_OE(3) <= (NOT AS AND RW AND NOT $OpTx$$OpTx$FX_DC$84_INV$97);
D_I(4) <= NOT ((NOT AS AND RW AND NOT DQ(4).PIN AND lan));
D(4) <= D_I(4) when D_OE(4) = '1' else 'Z';
D_OE(4) <= (NOT AS AND RW AND NOT $OpTx$$OpTx$FX_DC$84_INV$97);
D_I(5) <= NOT ((NOT AS AND RW AND NOT DQ(5).PIN AND lan));
D(5) <= D_I(5) when D_OE(5) = '1' else 'Z';
D_OE(5) <= (NOT AS AND RW AND NOT $OpTx$$OpTx$FX_DC$84_INV$97);
D_I(6) <= NOT ((NOT AS AND RW AND NOT DQ(6).PIN AND lan));
D(6) <= D_I(6) when D_OE(6) = '1' else 'Z';
D_OE(6) <= (NOT AS AND RW AND NOT $OpTx$$OpTx$FX_DC$84_INV$97);
D_I(7) <= NOT ((NOT AS AND RW AND NOT DQ(7).PIN AND lan));
D(7) <= D_I(7) when D_OE(7) = '1' else 'Z';
D_OE(7) <= (NOT AS AND RW AND NOT $OpTx$$OpTx$FX_DC$84_INV$97);
D_I(8) <= NOT ((NOT AS AND RW AND NOT DQ(8).PIN AND lan));
D(8) <= D_I(8) when D_OE(8) = '1' else 'Z';
D_OE(8) <= (NOT AS AND RW AND NOT $OpTx$$OpTx$FX_DC$84_INV$97);
D_I(9) <= NOT ((NOT AS AND RW AND NOT DQ(9).PIN AND lan));
D(9) <= D_I(9) when D_OE(9) = '1' else 'Z';
D_OE(9) <= (NOT AS AND RW AND NOT $OpTx$$OpTx$FX_DC$84_INV$97);
D_I(10) <= NOT ((NOT AS AND RW AND NOT DQ(10).PIN AND lan));
D(10) <= D_I(10) when D_OE(10) = '1' else 'Z';
D_OE(10) <= (NOT AS AND RW AND NOT $OpTx$$OpTx$FX_DC$84_INV$97);
D_I(11) <= NOT ((NOT AS AND RW AND NOT DQ(11).PIN AND lan));
D(11) <= D_I(11) when D_OE(11) = '1' else 'Z';
D_OE(11) <= (NOT AS AND RW AND NOT $OpTx$$OpTx$FX_DC$84_INV$97);
D_I(12) <= ((AS AND Dout1(0))
OR (NOT RW AND Dout1(0))
OR (Dout1(0) AND NOT lan)
OR (NOT AS AND RW AND lan AND DQ(12).PIN));
D(12) <= D_I(12) when D_OE(12) = '1' else 'Z';
D_OE(12) <= (NOT AS AND RW AND NOT $OpTx$$OpTx$FX_DC$84_INV$97);
D_I(13) <= ((NOT RW AND Dout1(1))
OR (NOT lan AND Dout1(1))
OR (NOT AS AND RW AND lan AND DQ(13).PIN)
OR (AS AND Dout1(1)));
D(13) <= D_I(13) when D_OE(13) = '1' else 'Z';
D_OE(13) <= (NOT AS AND RW AND NOT $OpTx$$OpTx$FX_DC$84_INV$97);
D_I(14) <= ((AS AND Dout1(2))
OR (NOT RW AND Dout1(2))
OR (Dout1(2) AND NOT lan)
OR (NOT AS AND RW AND lan AND DQ(14).PIN));
D(14) <= D_I(14) when D_OE(14) = '1' else 'Z';
D_OE(14) <= (NOT AS AND RW AND NOT $OpTx$$OpTx$FX_DC$84_INV$97);
D_I(15) <= ((AS AND Dout1(3))
OR (NOT RW AND Dout1(3))
OR (Dout1(3) AND NOT lan)
OR (NOT AS AND RW AND lan AND DQ(15).PIN));
D(15) <= D_I(15) when D_OE(15) = '1' else 'Z';
D_OE(15) <= (NOT AS AND RW AND NOT $OpTx$$OpTx$FX_DC$84_INV$97);
DQ_I(0) <= D(0).PIN;
DQ(0) <= DQ_I(0) when DQ_OE(0) = '1' else 'Z';
DQ_OE(0) <= (NOT AS AND NOT RW);
DQ_I(1) <= D(1).PIN;
DQ(1) <= DQ_I(1) when DQ_OE(1) = '1' else 'Z';
DQ_OE(1) <= (NOT AS AND NOT RW);
DQ_I(2) <= D(2).PIN;
DQ(2) <= DQ_I(2) when DQ_OE(2) = '1' else 'Z';
DQ_OE(2) <= (NOT AS AND NOT RW);
DQ_I(3) <= D(3).PIN;
DQ(3) <= DQ_I(3) when DQ_OE(3) = '1' else 'Z';
DQ_OE(3) <= (NOT AS AND NOT RW);
DQ_I(4) <= D(4).PIN;
DQ(4) <= DQ_I(4) when DQ_OE(4) = '1' else 'Z';
DQ_OE(4) <= (NOT AS AND NOT RW);
DQ_I(5) <= D(5).PIN;
DQ(5) <= DQ_I(5) when DQ_OE(5) = '1' else 'Z';
DQ_OE(5) <= (NOT AS AND NOT RW);
DQ_I(6) <= D(6).PIN;
DQ(6) <= DQ_I(6) when DQ_OE(6) = '1' else 'Z';
DQ_OE(6) <= (NOT AS AND NOT RW);
DQ_I(7) <= D(7).PIN;
DQ(7) <= DQ_I(7) when DQ_OE(7) = '1' else 'Z';
DQ_OE(7) <= (NOT AS AND NOT RW);
DQ_I(8) <= D(8).PIN;
DQ(8) <= DQ_I(8) when DQ_OE(8) = '1' else 'Z';
DQ_OE(8) <= (NOT AS AND NOT RW);
DQ_I(9) <= D(9).PIN;
DQ(9) <= DQ_I(9) when DQ_OE(9) = '1' else 'Z';
DQ_OE(9) <= (NOT AS AND NOT RW);
DQ_I(10) <= D(10).PIN;
DQ(10) <= DQ_I(10) when DQ_OE(10) = '1' else 'Z';
DQ_OE(10) <= (NOT AS AND NOT RW);
DQ_I(11) <= D(11).PIN;
DQ(11) <= DQ_I(11) when DQ_OE(11) = '1' else 'Z';
DQ_OE(11) <= (NOT AS AND NOT RW);
DQ_I(12) <= D(12).PIN;
DQ(12) <= DQ_I(12) when DQ_OE(12) = '1' else 'Z';
DQ_OE(12) <= (NOT AS AND NOT RW);
DQ_I(13) <= D(13).PIN;
DQ(13) <= DQ_I(13) when DQ_OE(13) = '1' else 'Z';
DQ_OE(13) <= (NOT AS AND NOT RW);
DQ_I(14) <= D(14).PIN;
DQ(14) <= DQ_I(14) when DQ_OE(14) = '1' else 'Z';
DQ_OE(14) <= (NOT AS AND NOT RW);
DQ_I(15) <= D(15).PIN;
DQ(15) <= DQ_I(15) when DQ_OE(15) = '1' else 'Z';
DQ_OE(15) <= (NOT AS AND NOT RW);
DTACK_I <= '0';
DTACK <= DTACK_I when DTACK_OE = '1' else 'Z';
DTACK_OE <= '0';
FDCPE_Dout10: FDCPE port map (Dout1(0),Dout1_D(0),SHUT_UP(2)/SHUT_UP(2)_CLKF,'0','0');
Dout1_D(0) <= ((D_13_IOBUFE.EXP)
OR (AS AND RESET AND NOT Dout1(0))
OR (NOT AS AND RW AND RESET AND NOT AUTO_CONFIG_DONE(0) AND
autoconfig AND A(2) AND NOT A(5) AND NOT A(1) AND NOT A(3) AND NOT A(6))
OR (NOT AS AND RW AND RESET AND NOT AUTO_CONFIG_DONE(0) AND
autoconfig AND NOT A(4) AND NOT A(5) AND NOT A(1) AND NOT A(3) AND NOT A(6))
OR (NOT AS AND RW AND RESET AND NOT AUTO_CONFIG_DONE(1) AND
autoconfig AND A(2) AND NOT A(5) AND NOT A(1) AND NOT A(3) AND NOT A(6))
OR (NOT AS AND RW AND RESET AND NOT AUTO_CONFIG_DONE(1) AND
autoconfig AND NOT A(4) AND NOT A(5) AND NOT A(1) AND NOT A(3) AND NOT A(6))
OR (NOT RW AND RESET AND NOT Dout1(0))
OR (RESET AND NOT Dout1(0) AND NOT autoconfig)
OR (NOT AS AND RW AND RESET AND NOT AUTO_CONFIG_DONE(0) AND
autoconfig AND A(2) AND NOT A(4) AND NOT A(3) AND NOT A(6))
OR (NOT AS AND RW AND RESET AND autoconfig AND A(2) AND NOT A(4) AND
A(5) AND NOT A(3) AND NOT A(6))
OR (NOT AS AND RW AND RESET AND autoconfig AND NOT A(2) AND NOT A(4) AND
NOT A(5) AND NOT A(3) AND A(6))
OR (RESET AND AUTO_CONFIG_DONE(2) AND NOT Dout1(0) AND NOT A(4) AND
NOT A(5) AND NOT A(1) AND NOT A(3) AND NOT A(6))
OR (RESET AND AUTO_CONFIG_DONE(2) AND
AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND NOT Dout1(0) AND A(2) AND NOT A(5) AND
NOT A(3) AND NOT A(6))
OR (RESET AND AUTO_CONFIG_DONE(0) AND
AUTO_CONFIG_DONE(1) AND NOT Dout1(0) AND A(2) AND NOT A(4) AND A(5) AND A(1) AND NOT A(6))
OR (NOT AS AND RW AND RESET AND NOT AUTO_CONFIG_DONE(2) AND
AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND autoconfig AND A(2) AND NOT A(4) AND
A(5) AND A(1) AND NOT A(6)));
FDCPE_Dout11: FDCPE port map (Dout1(1),Dout1_D(1),SHUT_UP(2)/SHUT_UP(2)_CLKF,'0','0');
Dout1_D(1) <= ((AS AND RESET AND NOT Dout1(1))
OR (NOT RW AND RESET AND NOT Dout1(1))
OR (RESET AND NOT Dout1(1) AND NOT A(2) AND NOT A(4) AND NOT A(5) AND NOT A(3))
OR (NOT AS AND RW AND RESET AND NOT AUTO_CONFIG_DONE(0) AND
autoconfig AND NOT A(2) AND NOT A(5) AND A(1) AND NOT A(3) AND NOT A(6))
OR (NOT AS AND RW AND RESET AND NOT AUTO_CONFIG_DONE(1) AND
autoconfig AND NOT A(2) AND NOT A(5) AND A(1) AND NOT A(3) AND NOT A(6))
OR (D_2_IOBUFE.EXP)
OR (RESET AND NOT autoconfig AND NOT Dout1(1))
OR (NOT AS AND RW AND RESET AND NOT AUTO_CONFIG_DONE(2) AND
autoconfig AND NOT A(2) AND NOT A(4) AND NOT A(5) AND NOT A(3))
OR (NOT AS AND RW AND RESET AND autoconfig AND A(2) AND A(4) AND
NOT A(5) AND A(3) AND NOT A(6))
OR (NOT AS AND RW AND RESET AND autoconfig AND NOT A(2) AND NOT A(4) AND
NOT A(5) AND NOT A(3) AND A(6))
OR (NOT AS AND RW AND RESET AND autoconfig AND A(4) AND NOT A(5) AND
NOT A(1) AND A(3) AND NOT A(6))
OR (RESET AND AUTO_CONFIG_DONE(2) AND
AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND NOT Dout1(1) AND A(2) AND NOT A(5) AND
NOT A(3) AND NOT A(6))
OR (NOT AS AND RW AND RESET AND AUTO_CONFIG_DONE(2) AND
autoconfig AND NOT A(2) AND NOT A(5) AND A(1) AND NOT A(3) AND NOT A(6))
OR (NOT AS AND RW AND RESET AND NOT AUTO_CONFIG_DONE(1) AND
autoconfig AND NOT A(4) AND NOT A(5) AND NOT A(1) AND NOT A(3) AND NOT A(6))
OR (RESET AND AUTO_CONFIG_DONE(2) AND
AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND NOT Dout1(1) AND A(2) AND NOT A(4) AND
A(5) AND A(1) AND A(3) AND NOT A(6)));
FDCPE_Dout12: FDCPE port map (Dout1(2),Dout1_D(2),SHUT_UP(2)/SHUT_UP(2)_CLKF,'0','0');
Dout1_D(2) <= ((NOT AS AND RW AND RESET AND autoconfig AND NOT A(2) AND NOT A(4) AND
NOT A(5) AND A(1) AND NOT A(3))
OR (NOT AS AND RW AND RESET AND autoconfig AND NOT A(2) AND NOT A(4) AND
NOT A(5) AND NOT A(3) AND A(6))
OR (NOT AS AND RW AND RESET AND autoconfig AND A(2) AND A(4) AND
NOT A(5) AND NOT A(1) AND A(3) AND NOT A(6))
OR (NOT AS AND RW AND RESET AND autoconfig AND A(2) AND NOT A(4) AND
A(5) AND A(1) AND NOT A(3) AND NOT A(6))
OR (AUTO_CONFIG_DONE_CYCLE(0).EXP)
OR (AS AND RESET AND NOT Dout1(2))
OR (NOT RW AND RESET AND NOT Dout1(2))
OR (RESET AND NOT Dout1(2) AND NOT autoconfig)
OR (NOT AS AND RW AND RESET AND NOT AUTO_CONFIG_DONE(2) AND
AUTO_CONFIG_DONE(0) AND autoconfig AND A(2) AND NOT A(5) AND A(1) AND NOT A(3) AND NOT A(6))
OR (NOT AS AND RW AND RESET AND NOT AUTO_CONFIG_DONE(1) AND
autoconfig AND A(2) AND NOT A(4) AND NOT A(5) AND NOT A(1) AND NOT A(3) AND NOT A(6))
OR (RESET AND AUTO_CONFIG_DONE(2) AND
AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND NOT Dout1(2) AND A(2) AND NOT A(5) AND
NOT A(3) AND NOT A(6))
OR (RESET AND AUTO_CONFIG_DONE(2) AND
AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND NOT Dout1(2) AND NOT A(4) AND NOT A(5) AND
NOT A(3) AND NOT A(6))
OR (RESET AND AUTO_CONFIG_DONE(2) AND
AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND NOT Dout1(2) AND A(2) AND NOT A(4) AND
A(5) AND A(1) AND NOT A(6))
OR (NOT AS AND RW AND RESET AND AUTO_CONFIG_DONE(0) AND
NOT AUTO_CONFIG_DONE(1) AND autoconfig AND A(2) AND NOT A(5) AND A(1) AND NOT A(3) AND NOT A(6)));
FDCPE_Dout13: FDCPE port map (Dout1(3),Dout1_D(3),SHUT_UP(2)/SHUT_UP(2)_CLKF,'0','0');
Dout1_D(3) <= ((LAN_BASEADR(4).EXP)
OR (NOT RW AND RESET AND NOT Dout1(3))
OR (RESET AND NOT Dout1(3) AND NOT autoconfig)
OR (NOT AS AND RW AND RESET AND NOT AUTO_CONFIG_DONE(0) AND
autoconfig AND NOT A(5) AND A(1) AND NOT A(3) AND NOT A(6))
OR (NOT AS AND RW AND RESET AND NOT AUTO_CONFIG_DONE(1) AND
autoconfig AND NOT A(5) AND A(1) AND NOT A(3) AND NOT A(6))
OR (NOT AS AND RW AND RESET AND autoconfig AND NOT A(2) AND NOT A(4) AND
NOT A(5) AND NOT A(3) AND A(6))
OR (NOT AS AND RW AND RESET AND autoconfig AND NOT A(2) AND NOT A(5) AND
A(1) AND NOT A(3) AND NOT A(6))
OR (NOT AS AND RW AND RESET AND autoconfig AND A(2) AND A(4) AND
NOT A(5) AND A(1) AND A(3) AND NOT A(6))
OR (NOT AS AND RW AND RESET AND autoconfig AND A(2) AND NOT A(4) AND
A(5) AND NOT A(1) AND NOT A(3) AND NOT A(6))
OR (NOT AS AND RW AND RESET AND autoconfig AND NOT A(2) AND A(4) AND
NOT A(5) AND NOT A(1) AND A(3) AND NOT A(6))
OR (AS AND RESET AND NOT Dout1(3))
OR (RESET AND AUTO_CONFIG_DONE(2) AND
AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND NOT Dout1(3) AND A(2) AND NOT A(5) AND
NOT A(3) AND NOT A(6))
OR (RESET AND AUTO_CONFIG_DONE(2) AND
AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND NOT Dout1(3) AND NOT A(4) AND NOT A(5) AND
NOT A(3) AND NOT A(6))
OR (NOT AS AND RW AND RESET AND NOT AUTO_CONFIG_DONE(2) AND
autoconfig AND A(2) AND A(4) AND NOT A(5) AND A(1) AND NOT A(6)));
IDE_A(0) <= A(9);
IDE_A(1) <= A(10);
IDE_A(2) <= A(11);
FTCPE_IDE_BASEADR0: FTCPE port map (IDE_BASEADR(0),IDE_BASEADR_T(0),SHUT_UP(2)/SHUT_UP(2)_CLKF,'0','0');
IDE_BASEADR_T(0) <= ((NOT RESET AND NOT IDE_BASEADR(0))
OR (NOT AS AND NOT RW AND NOT AUTO_CONFIG_DONE(2) AND
AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND autoconfig AND
NOT IDE_BASEADR(0) AND NOT A(2) AND NOT A(4) AND NOT A(5) AND NOT A(1) AND A(3) AND A(6) AND
D(8).PIN AND NOT UDS)
OR (NOT AS AND NOT RW AND RESET AND NOT AUTO_CONFIG_DONE(2) AND
AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND autoconfig AND
IDE_BASEADR(0) AND NOT A(2) AND NOT A(4) AND NOT A(5) AND NOT A(1) AND A(3) AND A(6) AND
NOT D(8).PIN AND NOT UDS));
FTCPE_IDE_BASEADR1: FTCPE port map (IDE_BASEADR(1),IDE_BASEADR_T(1),SHUT_UP(2)/SHUT_UP(2)_CLKF,'0','0');
IDE_BASEADR_T(1) <= ((NOT RESET AND NOT IDE_BASEADR(1))
OR (NOT AS AND NOT RW AND NOT AUTO_CONFIG_DONE(2) AND
AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND autoconfig AND
NOT IDE_BASEADR(1) AND NOT A(2) AND NOT A(4) AND NOT A(5) AND NOT A(1) AND A(3) AND A(6) AND
D(9).PIN AND NOT UDS)
OR (NOT AS AND NOT RW AND RESET AND NOT AUTO_CONFIG_DONE(2) AND
AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND autoconfig AND
IDE_BASEADR(1) AND NOT A(2) AND NOT A(4) AND NOT A(5) AND NOT A(1) AND A(3) AND A(6) AND
NOT D(9).PIN AND NOT UDS));
FTCPE_IDE_BASEADR2: FTCPE port map (IDE_BASEADR(2),IDE_BASEADR_T(2),SHUT_UP(2)/SHUT_UP(2)_CLKF,'0','0');
IDE_BASEADR_T(2) <= ((NOT RESET AND NOT IDE_BASEADR(2))
OR (NOT AS AND NOT RW AND NOT AUTO_CONFIG_DONE(2) AND
AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND autoconfig AND
NOT IDE_BASEADR(2) AND NOT A(2) AND NOT A(4) AND NOT A(5) AND NOT A(1) AND A(3) AND A(6) AND
D(10).PIN AND NOT UDS)
OR (NOT AS AND NOT RW AND RESET AND NOT AUTO_CONFIG_DONE(2) AND
AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND autoconfig AND
IDE_BASEADR(2) AND NOT A(2) AND NOT A(4) AND NOT A(5) AND NOT A(1) AND A(3) AND A(6) AND
NOT D(10).PIN AND NOT UDS));
FTCPE_IDE_BASEADR3: FTCPE port map (IDE_BASEADR(3),IDE_BASEADR_T(3),SHUT_UP(2)/SHUT_UP(2)_CLKF,'0','0');
IDE_BASEADR_T(3) <= ((NOT RESET AND NOT IDE_BASEADR(3))
OR (NOT AS AND NOT RW AND NOT AUTO_CONFIG_DONE(2) AND
AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND autoconfig AND
NOT IDE_BASEADR(3) AND NOT A(2) AND NOT A(4) AND NOT A(5) AND NOT A(1) AND A(3) AND A(6) AND
D(11).PIN AND NOT UDS)
OR (NOT AS AND NOT RW AND RESET AND NOT AUTO_CONFIG_DONE(2) AND
AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND autoconfig AND
IDE_BASEADR(3) AND NOT A(2) AND NOT A(4) AND NOT A(5) AND NOT A(1) AND A(3) AND A(6) AND
NOT D(11).PIN AND NOT UDS));
FTCPE_IDE_BASEADR4: FTCPE port map (IDE_BASEADR(4),IDE_BASEADR_T(4),SHUT_UP(2)/SHUT_UP(2)_CLKF,'0','0');
IDE_BASEADR_T(4) <= ((NOT RESET AND NOT IDE_BASEADR(4))
OR (NOT AS AND NOT RW AND NOT AUTO_CONFIG_DONE(2) AND
AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND autoconfig AND
NOT IDE_BASEADR(4) AND NOT A(2) AND NOT A(4) AND NOT A(5) AND NOT A(1) AND A(3) AND A(6) AND
D(12).PIN AND NOT UDS)
OR (NOT AS AND NOT RW AND RESET AND NOT AUTO_CONFIG_DONE(2) AND
AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND autoconfig AND
IDE_BASEADR(4) AND NOT A(2) AND NOT A(4) AND NOT A(5) AND NOT A(1) AND A(3) AND A(6) AND
NOT D(12).PIN AND NOT UDS));
FTCPE_IDE_BASEADR5: FTCPE port map (IDE_BASEADR(5),IDE_BASEADR_T(5),SHUT_UP(2)/SHUT_UP(2)_CLKF,'0','0');
IDE_BASEADR_T(5) <= ((NOT RESET AND NOT IDE_BASEADR(5))
OR (NOT AS AND NOT RW AND NOT AUTO_CONFIG_DONE(2) AND
AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND autoconfig AND
NOT IDE_BASEADR(5) AND NOT A(2) AND NOT A(4) AND NOT A(5) AND NOT A(1) AND A(3) AND A(6) AND
D(13).PIN AND NOT UDS)
OR (NOT AS AND NOT RW AND RESET AND NOT AUTO_CONFIG_DONE(2) AND
AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND autoconfig AND
IDE_BASEADR(5) AND NOT A(2) AND NOT A(4) AND NOT A(5) AND NOT A(1) AND A(3) AND A(6) AND
NOT D(13).PIN AND NOT UDS));
FTCPE_IDE_BASEADR6: FTCPE port map (IDE_BASEADR(6),IDE_BASEADR_T(6),SHUT_UP(2)/SHUT_UP(2)_CLKF,'0','0');
IDE_BASEADR_T(6) <= ((NOT RESET AND NOT IDE_BASEADR(6))
OR (NOT AS AND NOT RW AND NOT AUTO_CONFIG_DONE(2) AND
AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND autoconfig AND
NOT IDE_BASEADR(6) AND NOT A(2) AND NOT A(4) AND NOT A(5) AND NOT A(1) AND A(3) AND A(6) AND
D(14).PIN AND NOT UDS)
OR (NOT AS AND NOT RW AND RESET AND NOT AUTO_CONFIG_DONE(2) AND
AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND autoconfig AND
IDE_BASEADR(6) AND NOT A(2) AND NOT A(4) AND NOT A(5) AND NOT A(1) AND A(3) AND A(6) AND
NOT D(14).PIN AND NOT UDS));
FTCPE_IDE_BASEADR7: FTCPE port map (IDE_BASEADR(7),IDE_BASEADR_T(7),SHUT_UP(2)/SHUT_UP(2)_CLKF,'0','0');
IDE_BASEADR_T(7) <= ((NOT RESET AND NOT IDE_BASEADR(7))
OR (NOT AS AND NOT RW AND NOT AUTO_CONFIG_DONE(2) AND
AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND autoconfig AND
NOT IDE_BASEADR(7) AND NOT A(2) AND NOT A(4) AND NOT A(5) AND NOT A(1) AND A(3) AND A(6) AND
D(15).PIN AND NOT UDS)
OR (NOT AS AND NOT RW AND RESET AND NOT AUTO_CONFIG_DONE(2) AND
AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND autoconfig AND
IDE_BASEADR(7) AND NOT A(2) AND NOT A(4) AND NOT A(5) AND NOT A(1) AND A(3) AND A(6) AND
NOT D(15).PIN AND NOT UDS));
IDE_CS(0) <= NOT A(12);
IDE_CS(1) <= NOT A(13);
FDCPE_IDE_ENABLE: FDCPE port map (IDE_ENABLE,IDE_ENABLE_D,SHUT_UP(2)/SHUT_UP(2)_CLKF,'0','0');
IDE_ENABLE_D <= ((RESET AND NOT IDE_ENABLE)
OR (NOT AS AND NOT RW AND RESET AND ide));
FDCPE_IDE_R: FDCPE port map (IDE_R,IDE_R_D,SHUT_UP(2)/SHUT_UP(2)_CLKF,'0','0');
IDE_R_D <= (NOT AS AND RW AND RESET AND ide AND NOT IDE_ENABLE);
FDCPE_IDE_W: FDCPE port map (IDE_W,IDE_W_D,SHUT_UP(2)/SHUT_UP(2)_CLKF,'0','0');
IDE_W_D <= (NOT AS AND NOT RW AND RESET AND ide);
INT_OUT_I <= '0';
INT_OUT <= INT_OUT_I when INT_OUT_OE = '1' else 'Z';
INT_OUT_OE <= NOT CP_IRQ;
FTCPE_LAN_BASEADR0: FTCPE port map (LAN_BASEADR(0),LAN_BASEADR_T(0),SHUT_UP(2)/SHUT_UP(2)_CLKF,'0','0');
LAN_BASEADR_T(0) <= ((NOT RESET AND NOT LAN_BASEADR(0))
OR (NOT AS AND NOT RW AND NOT AUTO_CONFIG_DONE(0) AND autoconfig AND
NOT LAN_BASEADR(0) AND NOT A(2) AND NOT A(4) AND NOT A(5) AND NOT A(1) AND A(3) AND A(6) AND
D(8).PIN AND NOT UDS)
OR (NOT AS AND NOT RW AND RESET AND NOT AUTO_CONFIG_DONE(0) AND
autoconfig AND LAN_BASEADR(0) AND NOT A(2) AND NOT A(4) AND NOT A(5) AND NOT A(1) AND
A(3) AND A(6) AND NOT D(8).PIN AND NOT UDS));
FTCPE_LAN_BASEADR1: FTCPE port map (LAN_BASEADR(1),LAN_BASEADR_T(1),SHUT_UP(2)/SHUT_UP(2)_CLKF,'0','0');
LAN_BASEADR_T(1) <= ((NOT RESET AND NOT LAN_BASEADR(1))
OR (NOT AS AND NOT RW AND NOT AUTO_CONFIG_DONE(0) AND autoconfig AND
NOT LAN_BASEADR(1) AND NOT A(2) AND NOT A(4) AND NOT A(5) AND NOT A(1) AND A(3) AND A(6) AND
D(9).PIN AND NOT UDS)
OR (NOT AS AND NOT RW AND RESET AND NOT AUTO_CONFIG_DONE(0) AND
autoconfig AND LAN_BASEADR(1) AND NOT A(2) AND NOT A(4) AND NOT A(5) AND NOT A(1) AND
A(3) AND A(6) AND NOT D(9).PIN AND NOT UDS));
FTCPE_LAN_BASEADR2: FTCPE port map (LAN_BASEADR(2),LAN_BASEADR_T(2),SHUT_UP(2)/SHUT_UP(2)_CLKF,'0','0');
LAN_BASEADR_T(2) <= ((NOT RESET AND NOT LAN_BASEADR(2))
OR (NOT AS AND NOT RW AND NOT AUTO_CONFIG_DONE(0) AND autoconfig AND
NOT LAN_BASEADR(2) AND NOT A(2) AND NOT A(4) AND NOT A(5) AND NOT A(1) AND A(3) AND A(6) AND
D(10).PIN AND NOT UDS)
OR (NOT AS AND NOT RW AND RESET AND NOT AUTO_CONFIG_DONE(0) AND
autoconfig AND LAN_BASEADR(2) AND NOT A(2) AND NOT A(4) AND NOT A(5) AND NOT A(1) AND
A(3) AND A(6) AND NOT D(10).PIN AND NOT UDS));
FTCPE_LAN_BASEADR3: FTCPE port map (LAN_BASEADR(3),LAN_BASEADR_T(3),SHUT_UP(2)/SHUT_UP(2)_CLKF,'0','0');
LAN_BASEADR_T(3) <= ((NOT RESET AND NOT LAN_BASEADR(3))
OR (NOT AS AND NOT RW AND NOT AUTO_CONFIG_DONE(0) AND autoconfig AND
NOT LAN_BASEADR(3) AND NOT A(2) AND NOT A(4) AND NOT A(5) AND NOT A(1) AND A(3) AND A(6) AND
D(11).PIN AND NOT UDS)
OR (NOT AS AND NOT RW AND RESET AND NOT AUTO_CONFIG_DONE(0) AND
autoconfig AND LAN_BASEADR(3) AND NOT A(2) AND NOT A(4) AND NOT A(5) AND NOT A(1) AND
A(3) AND A(6) AND NOT D(11).PIN AND NOT UDS));
FTCPE_LAN_BASEADR4: FTCPE port map (LAN_BASEADR(4),LAN_BASEADR_T(4),SHUT_UP(2)/SHUT_UP(2)_CLKF,'0','0');
LAN_BASEADR_T(4) <= ((NOT RESET AND NOT LAN_BASEADR(4))
OR (NOT AS AND NOT RW AND NOT AUTO_CONFIG_DONE(0) AND autoconfig AND
NOT LAN_BASEADR(4) AND NOT A(2) AND NOT A(4) AND NOT A(5) AND NOT A(1) AND A(3) AND A(6) AND
D(12).PIN AND NOT UDS)
OR (NOT AS AND NOT RW AND RESET AND NOT AUTO_CONFIG_DONE(0) AND
autoconfig AND LAN_BASEADR(4) AND NOT A(2) AND NOT A(4) AND NOT A(5) AND NOT A(1) AND
A(3) AND A(6) AND NOT D(12).PIN AND NOT UDS));
FTCPE_LAN_BASEADR5: FTCPE port map (LAN_BASEADR(5),LAN_BASEADR_T(5),SHUT_UP(2)/SHUT_UP(2)_CLKF,'0','0');
LAN_BASEADR_T(5) <= ((NOT RESET AND NOT LAN_BASEADR(5))
OR (NOT AS AND NOT RW AND NOT AUTO_CONFIG_DONE(0) AND autoconfig AND
NOT LAN_BASEADR(5) AND NOT A(2) AND NOT A(4) AND NOT A(5) AND NOT A(1) AND A(3) AND A(6) AND
D(13).PIN AND NOT UDS)
OR (NOT AS AND NOT RW AND RESET AND NOT AUTO_CONFIG_DONE(0) AND
autoconfig AND LAN_BASEADR(5) AND NOT A(2) AND NOT A(4) AND NOT A(5) AND NOT A(1) AND
A(3) AND A(6) AND NOT D(13).PIN AND NOT UDS));
FTCPE_LAN_BASEADR6: FTCPE port map (LAN_BASEADR(6),LAN_BASEADR_T(6),SHUT_UP(2)/SHUT_UP(2)_CLKF,'0','0');
LAN_BASEADR_T(6) <= ((NOT RESET AND NOT LAN_BASEADR(6))
OR (NOT AS AND NOT RW AND NOT AUTO_CONFIG_DONE(0) AND autoconfig AND
NOT LAN_BASEADR(6) AND NOT A(2) AND NOT A(4) AND NOT A(5) AND NOT A(1) AND A(3) AND A(6) AND
D(14).PIN AND NOT UDS)
OR (NOT AS AND NOT RW AND RESET AND NOT AUTO_CONFIG_DONE(0) AND
autoconfig AND LAN_BASEADR(6) AND NOT A(2) AND NOT A(4) AND NOT A(5) AND NOT A(1) AND
A(3) AND A(6) AND NOT D(14).PIN AND NOT UDS));
FTCPE_LAN_BASEADR7: FTCPE port map (LAN_BASEADR(7),LAN_BASEADR_T(7),SHUT_UP(2)/SHUT_UP(2)_CLKF,'0','0');
LAN_BASEADR_T(7) <= ((NOT RESET AND NOT LAN_BASEADR(7))
OR (NOT AS AND NOT RW AND NOT AUTO_CONFIG_DONE(0) AND autoconfig AND
NOT LAN_BASEADR(7) AND NOT A(2) AND NOT A(4) AND NOT A(5) AND NOT A(1) AND A(3) AND A(6) AND
D(15).PIN AND NOT UDS)
OR (NOT AS AND NOT RW AND RESET AND NOT AUTO_CONFIG_DONE(0) AND
autoconfig AND LAN_BASEADR(7) AND NOT A(2) AND NOT A(4) AND NOT A(5) AND NOT A(1) AND
A(3) AND A(6) AND NOT D(15).PIN AND NOT UDS));
LAN_CFG(1) <= '0';
LAN_CFG(2) <= '1';
LAN_CFG(3) <= '0';
LAN_CFG(4) <= '0';
LAN_CS <= '1';
LAN_RD <= (NOT AS AND RW AND lan);
LAN_WRH <= (NOT AS AND NOT RW AND lan AND NOT UDS);
LAN_WRL <= (NOT AS AND NOT RW AND lan AND NOT LDS);
OWN_I <= '0';
OWN <= OWN_I when OWN_OE = '1' else 'Z';
OWN_OE <= NOT SLAVE_OBUF__$INT;
ROM_B(0) <= '0';
ROM_B(1) <= '0';
FDCPE_ROM_OE: FDCPE port map (ROM_OE,ROM_OE_D,SHUT_UP(2)/SHUT_UP(2)_CLKF,'0','0');
ROM_OE_D <= (NOT AS AND RW AND RESET AND ide AND IDE_ENABLE);
FDCPE_SHUT_UP0: FDCPE port map (SHUT_UP(0),SHUT_UP_D(0),SHUT_UP(2)/SHUT_UP(2)_CLKF,'0','0');
SHUT_UP_D(0) <= ((RESET AND NOT SHUT_UP(0))
OR (NOT AS AND NOT RW AND RESET AND NOT AUTO_CONFIG_DONE(0) AND
autoconfig AND NOT A(2) AND NOT A(4) AND NOT A(5) AND NOT A(1) AND A(3) AND A(6) AND
NOT UDS));
FDCPE_SHUT_UP2: FDCPE port map (SHUT_UP(2),SHUT_UP_D(2),SHUT_UP(2)/SHUT_UP(2)_CLKF,'0','0');
SHUT_UP_D(2) <= ((RESET AND NOT SHUT_UP(2))
OR (NOT AS AND NOT RW AND RESET AND NOT AUTO_CONFIG_DONE(2) AND
AUTO_CONFIG_DONE(0) AND AUTO_CONFIG_DONE(1) AND autoconfig AND NOT A(2) AND NOT A(4) AND
NOT A(5) AND NOT A(1) AND A(3) AND A(6) AND NOT UDS));
SHUT_UP(2)/SHUT_UP(2)_CLKF <= NOT (C1
XOR
SHUT_UP(2)/SHUT_UP(2)_CLKF <= NOT (C3);
SLAVE <= ((AS)
OR (NOT autoconfig AND NOT ide AND NOT lan));
SLAVE_OBUF__$INT <= ((AS)
OR (NOT autoconfig AND NOT ide AND NOT lan));
FDCPE_autoconfig: FDCPE port map (autoconfig,autoconfig_D,autoconfig/autoconfig_CLKF,NOT lan/lan_RSTF__$INT,'0');
autoconfig_D <= ((NOT AUTO_CONFIG_DONE(2) AND NOT CFIN AND NOT A(17) AND NOT A(16) AND
NOT A(18) AND A(19) AND NOT A(20) AND A(21) AND A(22) AND A(23))
OR (NOT AUTO_CONFIG_DONE(0) AND NOT CFIN AND NOT A(17) AND NOT A(16) AND
NOT A(18) AND A(19) AND NOT A(20) AND A(21) AND A(22) AND A(23))
OR (NOT AUTO_CONFIG_DONE(1) AND NOT CFIN AND NOT A(17) AND NOT A(16) AND
NOT A(18) AND A(19) AND NOT A(20) AND A(21) AND A(22) AND A(23)));
autoconfig/autoconfig_CLKF <= C1
XOR
autoconfig/autoconfig_CLKF <= C3;
FDCPE_ide: FDCPE port map (ide,ide_D,ide/ide_CLKF,NOT lan/lan_RSTF__$INT,'0');
ide_D <= ((SHUT_UP(2))
OR (EXP17_.EXP)
OR (IDE_BASEADR(0) AND NOT A(16))
OR (NOT IDE_BASEADR(0) AND A(16))
OR (NOT IDE_BASEADR(4) AND A(20))
OR (IDE_BASEADR(5) AND NOT A(21))
OR (NOT IDE_BASEADR(5) AND A(21))
OR (IDE_BASEADR(3) AND NOT A(19))
OR (NOT IDE_BASEADR(3) AND A(19))
OR (IDE_BASEADR(4) AND NOT A(20))
OR (IDE_BASEADR(7) AND NOT A(23))
OR (NOT IDE_BASEADR(7) AND A(23))
OR (IDE_BASEADR(6) AND NOT A(22))
OR (NOT IDE_BASEADR(6) AND A(22)));
ide/ide_CLKF <= C1
XOR
ide/ide_CLKF <= C3;
FDCPE_lan: FDCPE port map (lan,lan_D,lan/lan_CLKF,NOT lan/lan_RSTF__$INT,'0');
lan_D <= ((SHUT_UP(0))
OR (LAN_BASEADR(5) AND NOT A(21))
OR (LAN_BASEADR(6) AND NOT A(22))
OR (NOT LAN_BASEADR(6) AND A(22))
OR (LAN_BASEADR(7) AND NOT A(23))
OR (NOT LAN_BASEADR(7) AND A(23))
OR (EXP20_.EXP)
OR (LAN_BASEADR(0) AND NOT A(16))
OR (NOT LAN_BASEADR(0) AND A(16))
OR (LAN_BASEADR(4) AND NOT A(20))
OR (NOT LAN_BASEADR(4) AND A(20))
OR (NOT LAN_BASEADR(5) AND A(21))
OR (LAN_BASEADR(3) AND NOT A(19))
OR (NOT LAN_BASEADR(3) AND A(19)));
lan/lan_CLKF <= C1
XOR
lan/lan_CLKF <= C3;
lan/lan_RSTF__$INT <= (RESET AND BERR);
Register Legend:
FDCPE (Q,D,C,CLR,PRE,CE);
FTCPE (Q,D,C,CLR,PRE,CE);
LDCP (Q,D,G,CLR,PRE);
****************************** Device Pin Out *****************************
Device : XC95144XL-10-TQ144
Pin Signal Pin Signal
No. Name No. Name
1 VCC 73 VCC
2 D<0> 74 KPR
3 A_LAN<1> 75 AUTOBOOT_OFF
4 A_LAN<0> 76 LAN_WRL
5 A_LAN<3> 77 KPR
6 A_LAN<2> 78 KPR
7 A_LAN<5> 79 KPR
8 VCC 80 AS
9 A_LAN<4> 81 UDS
10 A_LAN<7> 82 LDS
11 A_LAN<6> 83 RW
12 LAN_CFG<1> 84 VCC
13 LAN_CFG<3> 85 DTACK
14 D<6> 86 A<23>
15 D<3> 87 A<22>
16 D<7> 88 A<21>
17 D<1> 89 GND
18 GND 90 GND
19 D<8> 91 A<20>
20 D<5> 92 A<19>
21 D<4> 93 KPR
22 IDE_CS<0> 94 A<18>
23 IDE_CS<1> 95 A<17>
24 IDE_A<0> 96 KPR
25 IDE_A<2> 97 A<16>
26 IDE_A<1> 98 BERR
27 IDE_R 99 GND
28 IDE_W 100 KPR
29 GND 101 KPR
30 KPR 102 C3
31 CP_IRQ 103 C1
32 INT_OUT 104 CFIN
33 KPR 105 CFOUT
34 CP_CS 106 SLAVE
35 ROM_OE 107 OWN
36 GND 108 GND
37 VCC 109 VCC
38 KPR 110 LAN_CFG<4>
39 D<2> 111 KPR
40 D<9> 112 DQ<15>
41 D<10> 113 DQ<13>
42 VCC 114 GND
43 D<11> 115 DQ<11>
44 D<12> 116 DQ<9>
45 D<13> 117 DQ<1>
46 D<14> 118 DQ<0>
47 GND 119 DQ<3>
48 D<15> 120 DQ<2>
49 A<5> 121 DQ<5>
50 A<4> 122 TDO
51 A<6> 123 GND
52 A<3> 124 DQ<4>
53 A<7> 125 DQ<7>
54 A<2> 126 DQ<6>
55 VCC 127 VCC
56 A<8> 128 DQ<8>
57 A<1> 129 DQ<10>
58 A<9> 130 DQ<12>
59 A<10> 131 DQ<14>
60 A<11> 132 LAN_WRH
61 A<12> 133 LAN_CS
62 GND 134 LAN_RD
63 TDI 135 LAN_CFG<2>
64 A<13> 136 A_LAN<13>
65 TMS 137 A_LAN<12>
66 A<14> 138 A_LAN<10>
67 TCK 139 A_LAN<11>
68 ROM_B<0> 140 A_LAN<8>
69 ROM_B<1> 141 VCC
70 CP_WE 142 A_LAN<9>
71 CP_RD 143 RESET
72 GND 144 GND
Legend : NC = Not Connected, unbonded pin
PGND = Unused I/O configured as additional Ground pin
TIE = Unused I/O floating -- must tie to VCC, GND or other signal
KPR = Unused I/O with weak keeper (leave unconnected)
VCC = Dedicated Power Pin
GND = Dedicated Ground Pin
TDI = Test Data In, JTAG pin
TDO = Test Data Out, JTAG pin
TCK = Test Clock, JTAG pin
TMS = Test Mode Select, JTAG pin
PROHIBITED = User reserved pin
**************************** Compiler Options ****************************
Following is a list of all global compiler options used by the fitter run.
Device(s) Specified : xc95144xl-10-TQ144
Optimization Method : SPEED
Multi-Level Logic Optimization : ON
Ignore Timing Specifications : OFF
Default Register Power Up Value : LOW
Keep User Location Constraints : ON
What-You-See-Is-What-You-Get : OFF
Exhaustive Fitting : OFF
Keep Unused Inputs : OFF
Slew Rate : FAST
Power Mode : STD
Ground on Unused IOs : OFF
Set I/O Pin Termination : KEEPER
Global Clock Optimization : ON
Global Set/Reset Optimization : ON
Global Ouput Enable Optimization : ON
Input Limit : 54
Pterm Limit : 25